Toyota Exhaust System Kits

BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.

BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.

Flowmaster introduces our new Outlaw Extreme stainless steel cat-back exhaust system for the 2005-2015 Toyota Tacoma with the 4.0L engine. This system uses an Outlaw series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing provides for maximum exhaust flow and durability. The system has a turndown style, dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation and it’s backed by Flowmaster’s Limited Warranty.

Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.

Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life. Use Walker accessories when installing catalytic converters and mufflers for a complete system upgrade.

BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.

BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.

Give your Toyota Tundra’s exhaust system an upgrade with a DynoMax Super Turbo single 2.5-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow and reduces turbulence and fiberglass matting that absorbs unwanted interior resonance for a mellow tone.

“aFe power introduces the MACH Force-Xp cat-back exhaust system constructed out of 2.5″” 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4.5″” diameter polished tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style.”

“aFe’s all new Scorpion series cat-back exhaust system for your 2007- 2017 Toyota FJ Cruiser with the V6-4.0L engine will get you there with speed and style. Designed from 2-1/2″” mandrel bent, aluminized steel, this exhaust system offers greater flow to deliver more torque and horsepower than the factory exhaust. This 3-piece designed cat-back system utilizes a less-restricting, baffled muffler to improve your FJ’s performance while maintaining a deep, smooth tone. 100% hand MIG-welded by certified craftsmen for proven quality and durability, the Scorpion exhaust system includes a black, high-temp powder coated 4 ½”” tip to give your FJ a clean, finished look. Flow and Performance This Scorpion Series exhaust system is constructed of 2-1/2″” mandrel bent aluminized steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: 18″” less restrictive, baffled muffler absorbs high pitch tones producing a powerful, aggressive, smooth tone under load and features an anti-corrosion protective coating. 4-1/2″” dia. Stainless Steel Exhaust Tip: This exhaust system is finished off with a 4-1/2″” dia. high-temp stainless steel exhaust tip that gives your FJ Cruiser a stylish, finished look. Leak-Free Seal: High quality band clamps and hardware are used for a complete 360-degree sealing surface. Perfect Fit: OE-style bayonet hangers are used to maintain a stable exhaust pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for a long-lasting, OE-style fit. This makes for an easy installation with no cutting required.”

“MagnaFlow’s revolutionary xMOD Series #19495 offers a completely modular exhaust system that takes modifying your vehicle’s exhaust to the next level of personalization. The configurable sound level provided by Supra xMOD Muffler Modules and MagnaFlow’s proven straight-through 5″” round 8″” long 3″” core mufflers now feature race bred quick release v-band clamps for quick installation and removal for when you want that race car sound instead of the deep, aggressive signature MagnaFlow exhaust note. Supra xMOD xTreme Deletes are equipped with the same v-band clamps, allowing for the removal of the muffler modules for that xMOD xTreme near-straight pipe sound experience. Please note, while the xMOD systems are 100% emissions legal, the use of the xTreme deletes is recommended for track use only. Check local sound laws for street legality. Expandable flow capacity for big power mods with Supra xMOD Opti-Flow Modules feature fast-flowing 3″” mandrel bent stainless steel design correcting the flow restrictions of the ovalized factory pipe, trading better ground clearance for total flow. The xMOD Opti-Flow Modules are optimized for stock power plus minor modifications. Supra xMOD xTreme Flow Modules: feature increased flow capacity with a 3.5″” mandrel bent big bore designed for big power modification support. The xMOD xTreme Flow Modules increase airflow up to 36%. #19495 retains the Sport mode exhaust valve functionality and provides a modest power gain over stock. The kit features 100% durable stainless-steel construction and is backed by MagnaFlow’s limited lifetime warranty.”

“The MagnaFlow Toyota 86/Toyota GR86/Subaru BRZ/Scion FR-S NEO Series Performance Exhaust System No:19595 brings dyno-proven performance and our latest exhaust advancements to your Japanese sportscar with an aggressive exterior sound and well-controlled, moderate interior sound made possible by careful integration of our No Drone Technology (NDT). By utilizing NDT in its design, exhaust kit No:19595 is able to minimize the unwanted droning noise that can otherwise occur at cruising speeds. Exhaust system No:19595 is compatible with Toyota GR86s, Subaru BRZs, Toyota 86s and Scion FR-Ss. This GR86/BRZ/86/FR-S exhaust system features 2.5″” fast-flowing mandrel bent main piping that flows through a straight-through muffler and NDT resonator before terminating in a dual rear exit with 4.5″” polished tips. The direct-fit design enables do-it-yourself installation and can be easily removed thanks to the use of racing-bred V-band clamps. No:19595 is made of premium, durable and corrosion resistant stainless steel and is produced used CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited warranty.”

“This cat-back exhaust system is constructed of 3″” to 2-1/2″” mandrel-bent brushed finish 304 stainless steel tubing for maximum strength and durability. This system features a high-flow stainless steel muffler, producing a powerful sound. Muffler finish may vary. Finishing off this exhaust system are dual 4-1/2″” diameter polished 304 stainless steel exhaust tips. The tips features a laser etched Takeda logo for a unique style. Utilizing factory style hangers, this is a direct bolt-on system that requires no cutting or modifications for a hassle-free installation. The factory-style exhaust valve provides a true bi-modal experience. In normal mode, all of the exhaust gases are directed through the muffler providing a deep, sporty tone. In Sport mode, the valve opens, allowing exhaust gases to bypass the muffler, providing an aggressive, crackling exhaust sound. The exhaust valve utilizes the factory valve motor (not included). A mitered merge collector is used to decrease turbulence and increase exhaust velocity, resulting in increased horsepower, torque, and improved throttle response. Stainless steel machined flanges and v-band clamps provide simple to install, leak-free joints. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% TIG welded for race-proven strength and durability. The Takeda cat-back exhaust shaves ten pounds of weight off your Supra.”

The MagnaFlow Toyota Tundra Street Series 19603 brings out the personality of your 3.4L Toyota Tundra with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and a straight-through muffler ending in a dual same side behind driver rear tire exit with 3.5in. black coated, welded-on, double wall, angle cut, folded edge tips, this Toyota Tundra exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tundras to shame. With this system your vehicle will be producing aggressive exterior and moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19603 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19603 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited construction warranty.

“Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “”concours classics”” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “”Made in the USA”” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.”

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

The MagnaFlow Toyota Tundra Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.7L Toyota Tundra with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tundra exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tundra’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15367 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15367 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Toyota Camry Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.5L Toyota Camry with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Toyota Camry exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Camry’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19411 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19411 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Toyota Tundra Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 4.7L, 5.7L Toyota Tundra with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear Behind Rear Tires exit with 4in. Polished Clamp-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tundra exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tundra’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19232 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19232 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

The MagnaFlow Toyota Tundra Street Series 19601 brings out the personality of your 3.4L Toyota Tundra with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and a straight-through muffler ending in a single driver side rear exit with a 4in. polished welded-on double wall angle cut rolled edge tip, this Toyota Tundra exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tundras to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19601 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19601 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

The American Thunder cat-back exhaust system for 2009-2021 Toyota Tundra trucks with the 4.6L, 4.7L or 5.7L engine is perfect for the person looking for an deep aggressive exterior tone with a mellow growl inside the truck and all of the performance benefits you expect from Flowmaster. This bolt-on emissions-legal system features all stainless steel construction, a specially designed dual inlet Super 40 Series muffler flowing into dual 2.50-inch mandrel-bent tailpipes for maximum performance with a deep tone. The kit comes with two sets of final pipes for either a dual out the back look or dual out behind the rear tires, which is beneficial for towing. The tailpipes are finished off with a pair of 3.50-inch double wall polished stainless steel tips. The system includes all necessary parts and hardware for easy at home installation. Note: Fits 2/4 wheel drive. Does not fit regular cab/short bed or double cab/long bed models. Only fits 2009 models built after 08/2008.