Subaru XT Transmission Parts
Top Subaru XT Transmission Parts Categories
We carry over 49 Transmission Parts in inventory for the Subaru XT. If you’re looking for aftermarket Transmission Parts for your Subaru XT, check out all these categories:
Essential Subaru XT Transmission Parts
National – Multi Purpose Seal (Part No.221820)
from
$8.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Original Equipment – MT Drain Plug Gasket (Part No.J1147946177OEA)
from
$2.28
MT Drain Plug Gasket
Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-30)
from
$24.99
Fully adjustable vacuum modulator to maintain accurate shift points.
Product Features:
See More
Product Features:
- Meets or exceeds OE fit, form and function
Beck/Arnley – Seal Drive Axle Flange (Part No.052-3509)
from
$7.29
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- High quality rubber designed to keep water and dirt out
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
National – Multi Purpose Seal (Part No.710265)
from
$8.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99169)
from
$24.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Manual Transmission Main Shaft Seal (Part No.S-710324)
Driveworks – Taper Bearing Set (Part No.S-30208)
from
$17.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Anchor – Transmission Mount: Rear, 1 Piece (Part No.9556)
from
$94.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to SUBA 85-91;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1991
- Weight approx: 2 Lbs
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Nippon Reinz – Oil Drain Plug Gaske (Part No.A612028860NRZ)
from
$2.00
Oil Drain Plug Gaske
Mark Automotive – Output Shaft Seal (Part No.J115754519MAM)
from
$15.32
Output Shaft Seal
ATP – AT EXT HOUSING SEAL (Part No.NO-10)
from
$2.99
AT EXT HOUSING SEAL
Carquest – Air Charge Temperature Sensor Connector (Part No.28419A)
from
$18.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
- External core made from oriented silicon steel ensures durability and longevity
Driveworks – Oil Seal (Part No.S-3771)
from
$8.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AUTO TRANS BAND (Part No.NX-23)
from
$38.99
AUTO TRANS BAND
Beck/Arnley – Seal External Housing Output/Output Shaft (Part No.052-1328)
from
$9.79
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- High quality rubber designed to keep water and dirt out
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
Driveworks – Ball Bearing (Part No.S-207)
from
$19.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Mark Automotive – AT Output Shaft Seal (Part No.J255728730MAM)
from
$9.15
AT Output Shaft Seal
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)
from
$39.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 5″ x 12-1/2″
- Sub-compact to compact cars
- GVWR up to 12,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
National – Bearings (Part No.30208)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.223051)
from
$4.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.225230)
from
$7.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-225230)
from
$5.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Subaru XT Transmission Parts Categories
Helping You Find the Right Transmission Parts for Your Subaru XT
You love your XT. So we’ve made it easier than ever to help you find Subaru XT Transmission Parts in our online catalog. Our inventory holds 49 aftermarket and OEM Transmission Parts for your Subaru XT, ranging from $2.00 to $94.99.
We offer parts from 16 brands trusted to make quality Transmission Parts for your Subaru XT. Before you buy, take some time to read through customer reviews. We currently have 6,960 reviews of Subaru XT Transmission Parts from previous customers. Some of the top rated parts include Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty with 4.5 stars and Maxi-Kool® XL Transmission Oil Cooler with 5.0 stars.
Find your XT Transmission Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Subaru XT part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Transmission Parts Brands for Your Subaru XT
Our inventory holds Transmission Parts for your Subaru XT from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, Imperial, and Driveworks, all of which can keep that Subaru happy.
We have Permatex parts available for your Subaru XT in categories like Automatic Transmission Pan and Gaskets. Some of the top-rated Permatex parts in these categories are:
Top-Rated Imperial Transmission Parts
Leading Imperial Transmission Parts
We carry Imperial brand parts for your Subaru XT across several catalog categories, including Transmission Cooler and Parts. Some of our most reviewed Imperial parts include:
FAQs for Subaru XT Transmission Parts
What are the most purchased Transmission Parts for the Subaru XT?
Out of 49 Transmission Parts for the Subaru XT, the most popular in our inventory are:
What are the top-rated Subaru XT Transmission Parts?
Top-rated Transmission Parts for your Subaru XT based on customer reviews/ratings are:
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
from
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
from
$52.99
(4)
Econo-Kool® Transmission Oil Cooler
“I just like the additional cooling on all my vehicles for transmission to last longer. They aren’t getting any cheaper to overhaul!”
