Subaru WRX Steering and Chassis Parts

Essential Subaru WRX Steering and Chassis Parts

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

Whiteline – Control Arm Upper Inner Bushing (Part No.KCA326)

Control Arm Upper Inner Bushing

from

$194.99
Whiteline adjustable camber kits provide the ability to fine tune camber settings for optimum tyre contact resulting in improved vehicle handling and increased tyre life. The kit includes low compliance synthetic elastomer bushings which help maintain preferred alignment settings as well as providing enhanced steering response.

Product Features:
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Whiteline – Brace Sway Bar Mount Support (Part No.KBR15)

Brace Sway Bar Mount Support

from

$94.99
Whiteline’s rear sway bar mount support brace increases the stiffness of the rear sway bar mount and reduce the likelihood of bending or cracking of the OEM mount due to the increased loads placed upon it. Recommended use with aftermarket sway bars for optimum sway bar performance.

Product Features:
  • Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Rare Parts – R & P BELLOWS (Part No.RP57337)

R & P BELLOWS

from

$48.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Rare Parts – Sway Bar Link (Part No.RP19200)

Sway Bar Link

from

$76.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

MOOG – Ball Joint (Part No.K9513)

Ball Joint

from

$54.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Designed to meet or exceed original equipment performance
See More

Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA313)

Roll Centre/Bump Steer Correction Kit

from

$292.99
A must for lowered vehicles, Whiteline roll centre and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.

Product Features:
  • Articulation voids deliver necessary suspension articulation and/or compression under loads.
  • Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Articulation voids deliver necessary suspension articulation and/or compression under loads.
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.KCA425)

Control Arm Lower Inner Rear Bushing

from

$157.99
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response – forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Product Features:
  • Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Whiteline – Sway Bar 26Mm Heavy Duty Blade Adjustable (Part No.BSF47Z)

Sway Bar 26Mm Heavy Duty Blade Adjustable

from

$289.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 26mm 2 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Whiteline – Sway Bar Link (Part No.KLC182)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Whiteline – Subframe Mount Bushing (Part No.KDT937)

Subframe Mount Bushing

from

$148.99
Subaru’s rear subframe is mounted on rubber voided bushings which allows for a significant amount of compliance/movement in the frame during high cornering loads. Whiteline’s low compliance polymer bushings eliminate this condition by positively locking in the frame position and removing the ‘lateral walking’ found when using high grip tires. The polymer bushing design has soft ‘stand-off’ buffers on the top and bottom surfaces of the bushing to allow slight vertical bushing movement of the subframe to eliminate that ‘rock-solid’ NVH feel and cushion against minor bumps and allow solid positive location when high torque and power is applied.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Whiteline – Subframe Mount Bushing (Part No.KDT938)

Subframe Mount Bushing

from

$46.99
Not your typical remove and replace bushing kit but simple installation means great for the DIYer’s. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as ‘lost motion’ of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

Product Features:
  • Inserts are designed to work with the original factory bushing rather than replacing it.
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Specially bonded design for optimised strength typically required in high load bearing applications.
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Driveworks – Camber Bolt Kit (Part No.DW-K5330)

Camber Bolt Kit

from

$29.99
Camber Bolt Kit

MOOG – Cntrl Arm w Ball Jt (Part No.RK623497)

Cntrl Arm w Ball Jt

from

$182.99
Cntrl Arm w Ball Jt

MOOG – Cntrl Arm w Ball Jt (Part No.RK623498)

Cntrl Arm w Ball Jt

from

$182.99
Cntrl Arm w Ball Jt

MOOG – Tie Rod End (Part No.ES3712)

Tie Rod End

from

$65.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Carquest Premium – TIE ROD END (Part No.310-73935)

TIE ROD END

from

$49.49
Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Carquest Premium – Ball Joint (Part No.410-69062)

Ball Joint

from

$50.99
Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Pre-applied threadlocker keeps fasteners from loosening due to vibration
See More

Rare Parts – Ball Joint (Part No.RP10598)

Ball Joint

from

$34.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Driveworks – Camber Bolt Kit (Part No.DW-K90474)

Camber Bolt Kit

from

$20.29
DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:
  • Designed to meet OE Form, Fit, and Function.
  • Performance tested to ensure durability and reduce tire wear.
  • Precision engineered for improved ride and steering response.
  • Hardware included for ease of installation (where applicable)
See More

Helping You Find the Right Steering and Chassis Parts for Your Subaru WRX

You love your WRX. So we’ve made it easier than ever to help you find Subaru WRX Steering and Chassis Parts in our online catalog. Our inventory holds 54 aftermarket and OEM Steering and Chassis Parts for your Subaru WRX, ranging from $11.49 to $894.99.

We offer parts from 9 brands trusted to make quality Steering and Chassis Parts for your Subaru WRX. Before you buy, take some time to read through customer reviews. We currently have 4,824 reviews of Subaru WRX Steering and Chassis Parts from previous customers. Some of the top rated parts include Tie Rod End with 4.1 stars and Transmission Oil Cooler Reinstallation Kit with 2.3 stars.

Find your WRX Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Subaru WRX part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Steering and Chassis Parts Brands for Your Subaru WRX

Our inventory holds Steering and Chassis Parts for your Subaru WRX from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Moog, and Driveworks, all of which can keep that Subaru happy.
We have MOOG parts available for your Subaru WRX in categories like Ball Joints and Camber Kits. Some of the top-rated MOOG parts in these categories are:
Ball Joint
from $54.99
(38)
Ball Joint
Suspension Ball Joint Kits
Camber Adjusting Kit
from $34.99
(9)
Camber Adjusting Kit
Camber Kits
Stabilizer Bar Link
from $50.99
(4)
Stabilizer Bar Link
Sway Bar Link Kits

Top-Rated Imperial Steering and Chassis Parts

Leading Imperial Steering and Chassis Parts

We carry Imperial brand parts for your Subaru WRX across several catalog categories, including Power Steering Parts. Some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for Subaru WRX Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the Subaru WRX?

Out of 54 Steering and Chassis Parts for the Subaru WRX, the most popular in our inventory are:
Ball Joint
from $42.99
(41)
Ball Joint
Lower Ball Joints
Tie Rod End
from $65.99
(9)
Tie Rod End
Tie Rod Ends
Camber Bolt Kit
from $20.29
(10)
Camber Bolt Kit
Front Alignment Kits

What are the top-rated Subaru WRX Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your Subaru WRX based on customer reviews/ratings are:
Tie Rod End
from $28.99
(8)
Tie Rod End
“Heavy duty and durable, and cost effective by the way.”
Transmission Oil Cooler Reinstallation Kit
from $20.79
(4)
Transmission Oil Cooler Reinstallation Kit
“They did not actually ahve teh kit when i got this so the erverice rep just made teh order up from bits off the shelf. The clips and hose was all the ”
Camber Adjusting Kit
from $48.99
(2)
Camber Adjusting Kit
“Quick wat to adjust camber”