Subaru Impreza Steering and Chassis Parts
Top Subaru Impreza Steering and Chassis Parts Categories
We carry over 342 Steering and Chassis Parts in inventory for the Subaru Impreza. If you’re looking for aftermarket Steering and Chassis Parts for your Subaru Impreza, check out all these categories:
Essential Subaru Impreza Steering and Chassis Parts
Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA313)
from
$292.99
A must for lowered vehicles, Whiteline roll centre and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.
Product Features:
See More
Product Features:
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
Whiteline – Control Arm Lower Inner Rear Bushing (Part No.KCA375)
from
$125.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
MOOG – Stabilizer Bar Bushing Kit (Part No.K201962)
from
$11.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- RESTORES RIDE — Provides revamped steering and handling feel
- QUIET DRIVE — Replacement can reduce rear end noise
Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2300)
from
$332.99
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100% performance testing to ensure perfect fit, function and reliable performance.
- 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Powercraft – Rack Pinion Seal Kit (Part No.9183)
from
$101.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Whiteline – Subframe Mount Bushing (Part No.KDT902)
from
$58.99
Not your typical remove and replace bushing kit but simple installation means great for the DIYer’s. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as ‘lost motion’ of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.
Product Features:
See More
Product Features:
- Inserts are designed to work with the original factory bushing rather than replacing it.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Specially bonded design for optimised strength typically required in high load bearing applications.
Dorman – Suspension Control Arm (Part No.522-688)
from
$296.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles.
- Reliable fit – precision-engineered to match the design and dimensions of original components.
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Ball Joint (Part No.K500426)
from
$48.49
Ball Joint
MOOG – Tie Rod End (Part No.EV800049)
from
$46.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Assembled in the USA
Autopart International Inc – P/S Pressure Hose (Part No.M20152076256API)
from
$186.09
P/S Pressure Hose
Carquest Premium – Power Steering Return Hose Assembly, 16mm Female "O" Ring x 3/8" I.D. Hose (Part No.40453)
from
$71.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Zinc coated tubes protect against rust and corrosion
- Heat/abrasion tubing protects vital areas
EMPI – re Steering Rack Boot (Part No.M1010186453EMP)
from
$17.94
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Driveworks – Camber Bolt Kit (Part No.DW-K5330)
from
$29.99
Camber Bolt Kit
Whiteline – Brace Sway Bar Mount Support (Part No.KBR15)
from
$94.99
Whiteline’s rear sway bar mount support brace increases the stiffness of the rear sway bar mount and reduce the likelihood of bending or cracking of the OEM mount due to the increased loads placed upon it. Recommended use with aftermarket sway bars for optimum sway bar performance.
Product Features:
See More
Product Features:
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Dorman – Alignment Camber / Toe Arm (Part No.545-247)
from
$103.99
This alignment camber and toe arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Whiteline – Sway Bar 22Mm X Heavy Duty Blade Adjustable Motorsport (Part No.BSF19XZ)
from
$283.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 2 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Powercraft – Rack Pinion Seal Kit (Part No.8868)
from
$97.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Tie Rod End (Part No.DW-EV257)
from
$14.29
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Dorman – Control Arm And Ball Joint Assembly – Suspension (Part No.537-163)
from
$123.99
This alignment toe arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles.
- Reliable fit – precision-engineered to match the design and dimensions of original components.
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Energy Suspension – Sway Bar Bushing Set (Part No.19.5101G)
from
$24.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Beck/Arnley – Tie Rod End with Boot Kit (Part No.101-7407)
from
$62.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Coated or plated for corrosion protection
- Required steering rack boot included in kit
- Quality construction for durability
- Application specific for this vehicle
Powercraft – Pump Seal Kit (Part No.8832)
from
$22.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36197)
from
$52.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Carquest Premium – Automatic Transmission Oil Pressure Switch Connector (Part No.PTA1631)
from
$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Subaru Impreza Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Subaru Impreza
You love your Impreza. So we’ve made it easier than ever to help you find Subaru Impreza Steering and Chassis Parts in our online catalog. Our inventory holds 342 aftermarket and OEM Steering and Chassis Parts for your Subaru Impreza, ranging from $2.79 to $984.99.
We offer parts from 26 brands trusted to make quality Steering and Chassis Parts for your Subaru Impreza. Before you buy, take some time to read through customer reviews. We currently have 59,191 reviews of Subaru Impreza Steering and Chassis Parts from previous customers. Some of the top rated parts include Ball Joint with 3.5 stars and Ball Joint with 4.6 stars.
Find your Impreza Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Subaru Impreza part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Subaru Impreza
Our inventory holds Steering and Chassis Parts for your Subaru Impreza from 26 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Carquest Premium, and Driveworks, all of which can keep that Subaru happy.
We have CTR parts available for your Subaru Impreza in categories like Sway Bars. Some of the top-rated CTR parts in these categories are:
Top-Rated Imperial Steering and Chassis Parts
Leading Imperial Steering and Chassis Parts
We carry Imperial brand parts for your Subaru Impreza across several catalog categories, including Power Steering Parts. Some of our most reviewed Imperial parts include:
FAQs for Subaru Impreza Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Subaru Impreza?
Out of 342 Steering and Chassis Parts for the Subaru Impreza, the most popular in our inventory are:
from
$7.79
This product is not rated
3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
What are the top-rated Subaru Impreza Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Subaru Impreza based on customer reviews/ratings are:
from
$68.99
(38)
Ball Joint
“These were a good fit on an 01 Neon. Came with new pinch bolt, nut, zero and snap ring.”
