Sterling Acterra 5500 Fuel and Emissions Systems
Top Sterling Acterra 5500 Fuel and Emissions Systems Categories
We carry over 15 Fuel and Emissions Systems in inventory for the Sterling Acterra 5500. If you’re looking for aftermarket Fuel and Emissions Systems for your Sterling Acterra 5500, check out all these categories:
Essential Sterling Acterra 5500 Fuel and Emissions Systems
Carquest Premium – Fuel/Water Separator Spin-on with Sensor Port, Drain and Reusable Sensor (Part No.86965)
from
$87.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
- Includes Sensor Port Thread: M14 x 2.0
- CAUTION: Furnished D-Ring must be installed on post for seal.
Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86813)
from
$81.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Application engineered media which aids in stripping water in diesel fuels
- Patent pending drain, metal end caps, which hold media in place
- Rust resistant can, ensuring no leakage from inside
- Made in USA
- Includes Integral Post Seal
Dorman – HD Solutions – Diesel Particulate Filter Gasket Kit (Part No.674-9052)
from
$106.99
When the diesel particulate filter (DPF) is failed or damaged, service it thoroughly by installing this direct replacement gasket. Made of durable materials for reliable service, it matches the function of the factory part and ensures a tight seal to the DPF.
Product Features:
See More
Product Features:
- Direct replacement – this diesel particulate filter (DPF) gasket matches the original gasket required to repair the DPF on specified vehicles.
- Ideal solution – this gasket is a reliable replacement for an original part that is damaged, failed or missing
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – HD Solutions – Water In Fuel Sensor (Part No.904-7370)
from
$55.99
This replacement water-in-fuel (WiF) sensor matches the function and performance of the original equipment sensor to prevent water damaging a diesel fuel injector. Made of quality materials, it has undergone extensive testing to ensure durability.
Product Features:
See More
Product Features:
- Ideal replacement – this water-in-fuel (WiF) sensor matches the original equipment sensor’s function and performance
- Durable construction – this sensor is made of durable materials to withstand exposure to diesel fuel
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone vehicle try-on and bench testing to ensure a quality fit and long service life
Dorman – HD Solutions – Diesel Particulate Filter Exhaust Clamp (Part No.674-7022)
from
$121.99
This diesel particulate filter (DPF) clamp is designed to match the fit and function of the original clamp on specified vehicles. It is engineered to help tightly secure the DPF filter when the original clamp is fatigued from normal use, damaged, or missing.
Product Features:
See More
Product Features:
- Direct replacement – this DPF clamp matches the fit and function of the original equipment clamp on specified vehicles.
- Ideal solution – engineered to help tightly secure the DPF filter when the original clamp is fatigued from normal use, damaged, or missing
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – HD Solutions – Diesel Particulate Filter Exhaust Clamp (Part No.674-7019)
from
$233.99
This diesel particulate filter (DPF) clamp is designed to match the fit and function of the original clamp on specified vehicles. It is engineered to help tightly secure the DPF filter when the original clamp is fatigued from normal use, damaged, or missing.
Product Features:
See More
Product Features:
- Direct replacement – this DPF clamp matches the fit and function of the original equipment clamp on specified vehicles.
- Ideal solution – engineered to help tightly secure the DPF filter when the original clamp is fatigued from normal use, damaged, or missing
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Delphi – Fuel Injector (Part No.EX634762)
from
$724.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Cardone – Fuel Injector (Part No.2J-504)
from
$388.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Delphi – Fuel Injector (Part No.EX634761)
from
$700.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX634763)
from
$735.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Dorman – HD Solutions – HD Diesel Particulate Filter – Not For Sale – CA (Part No.674-2026)
from
$2981.99
This diesel particulate filter (DPF) is designed to match the fit and function of the original filter on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this diesel particulate filter (DPF) is designed to match the fit and function of the original filter on specified vehicles.
- Restores functionality – reliable replacement for an original part that has failed due to clogging
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86412)
from
$84.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Application engineered media which aids in stripping water in diesel fuels
- Patent pending drain, metal end caps, which hold media in place
- Rust resistant can, ensuring no leakage from inside
- Made in USA
- Includes Integral Post Seal. Sensor Port Thread: 1/2-20
Carquest Premium – Fuel/Water Separator Spin-on with Drain, Oval Sensor Port and Reusable Sensor (Part No.86422)
from
$59.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Contains Sensor Port Thread: M14 x 2.0;Standpipe
- Includes Standpipe. Sensor Port Thread: M14 x 2.0
- CAUTION: Furnished D-Ring must be installed on post for seal. NOT Interchangeable with 86604.
Dorman – HD Solutions – Manifold Air Pressure Sensor (Part No.904-7124)
from
$103.99
This manifold absolute pressure sensor is designed to match the function of an original sensor on specified vehicles, and to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage.
Product Features:
See More
Product Features:
- Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles.
- Ideal solution – engineered to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Sterling Acterra 5500 Fuel and Emissions Systems Categories
Helping You Find the Right Fuel and Emissions Systems for Your Sterling Acterra 5500
You love your Acterra 5500. So we’ve made it easier than ever to help you find Sterling Acterra 5500 Fuel and Emissions Systems in our online catalog. Our inventory holds 15 aftermarket and OEM Fuel and Emissions Systems for your Sterling Acterra 5500, ranging from $55.99 to $2,981.99.
We offer parts from 4 brands trusted to make quality Fuel and Emissions Systems for your Sterling Acterra 5500.
Find your Acterra 5500 Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Sterling Acterra 5500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Fuel and Emissions Systems Brands for Your Sterling Acterra 5500
Our inventory holds Fuel and Emissions Systems for your Sterling Acterra 5500 from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Cardone, and Delphi, all of which can keep that Sterling happy.
FAQs for Sterling Acterra 5500 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the Sterling Acterra 5500?
Out of 15 Fuel and Emissions Systems for the Sterling Acterra 5500, the most popular in our inventory are:
from
$87.99
This product is not rated
Fuel/Water Separator Spin-on with Sensor Port, Drain and Reusable Sensor
Fuel and Water Separators
from
$59.99
This product is not rated
Fuel/Water Separator Spin-on with Drain, Oval Sensor Port and Reusable Sensor
Fuel Separators
