2001 Sterling Acterra 5500 Fuel and Emissions Systems
More 2001 Sterling Acterra 5500 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2001 Sterling Acterra 5500, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2001 Sterling Acterra 5500 Fuel and Emissions Systems
Carquest Premium – Fuel/Water Separator Spin-on with Open Port for Bowl (Part No.86812)
from
$91.99
Carquest spin-on fuel filters with open ends for bowls keep fuel clean and engines running at maximum efficiency. These filters feature a port designed to be used with the OE bowl.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Includes Port Thread: M95 x 2.5
Carquest Premium – Fuel/Water Separator Spin-on with Drain, Square Sensor Port and Reusable Sensor (Part No.86604)
from
$81.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
- Includes Standpipe. Sensor Port Thread: M14 x 2.0
- CAUTION: Furnished O-Ring must be installed on post for seal. For use with Deutz square sensor.
Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86813)
from
$81.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Application engineered media which aids in stripping water in diesel fuels
- Patent pending drain, metal end caps, which hold media in place
- Rust resistant can, ensuring no leakage from inside
- Made in USA
- Includes Integral Post Seal
Carquest Premium – Fuel/Water Separator Spin-on with Sensor Port, Drain and Reusable Sensor (Part No.86965)
from
$87.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
- Includes Sensor Port Thread: M14 x 2.0
- CAUTION: Furnished D-Ring must be installed on post for seal.
Dorman – HD Solutions – Manifold Air Pressure Sensor (Part No.904-7124)
from
$103.99
This manifold absolute pressure sensor is designed to match the function of an original sensor on specified vehicles, and to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage.
Product Features:
See More
Product Features:
- Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles
- Ideal solution – engineered to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Delphi – Fuel Injector (Part No.EX634762)
from
$724.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX639349)
from
$359.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX634763)
from
$735.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Delphi – Fuel Injector (Part No.EX630781)
from
$359.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Cardone – Fuel Injector (Part No.2J-504)
from
$388.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Delphi – Fuel Injector (Part No.EX634761)
from
$700.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Cardone – Fuel Injector (Part No.2J-505)
from
$388.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.
Product Features:
See More
Product Features:
- All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
- Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
- All components are renewed or replaced as necessary to ensure high quality and durability
- When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
- Guaranteed fit and function
- Meets or exceeds O.E.M. performance
Delphi – Fuel Injector (Part No.EX639350)
from
$373.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.
Product Features:
See More
Product Features:
- 100% O-ring replacement
- All Delphi injectors are tested utilizing OE methodologies
- Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
- No internal seal rings equals minimized leakage
- Recessed fuel exit minimizing possible plugging
- Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
- Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
Carquest Premium – Fuel/Water Separator Element (Part No.86585XE)
from
$40.49
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Made in USA
Carquest Premium – Fuel/Water Separator Spin-on with Drain, Oval Sensor Port and Reusable Sensor (Part No.86422)
from
$59.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Contains Sensor Port Thread: M14 x 2.0;Standpipe
- Includes Standpipe. Sensor Port Thread: M14 x 2.0
- CAUTION: Furnished D-Ring must be installed on post for seal. NOT Interchangeable with 86604.
Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.86412)
from
$84.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
- Application engineered media which aids in stripping water in diesel fuels
- Patent pending drain, metal end caps, which hold media in place
- Rust resistant can, ensuring no leakage from inside
- Made in USA
- Includes Integral Post Seal. Sensor Port Thread: 1/2-20
Popular 2001 Sterling Acterra 5500 Fuel and Emissions Systems Categories
2001 Sterling Acterra 5500 Fuel and Emissions Systems
You count on your 2001 Sterling Acterra 5500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 13 Fuel and Emissions Systems ranging in price from $40.49 to $388.99, you’re sure to find everything you need for your 2001 Sterling Acterra 5500.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 4 different brands like Carquest Premium, Cardone, and Delphi. 2001 Sterling Acterra 5500 Fuel and Emissions Systems start as low as $40.49!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 18 extensive product reviews on 2001 Sterling Acterra 5500 Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2001 Sterling Acterra 5500 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2001 Sterling Acterra 5500
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2001 Sterling Acterra 5500 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Cardone, Delphi, and even more.
Popular Carquest Premium Fuel and Emissions Systems
You’ll find popular Carquest Premium brand products across Fuel Pumps. All are waiting to get your 2001 Sterling Acterra 5500 back on the road. Some of the top-rated Carquest Premium products in these categories are:
FAQs for 2001 Sterling Acterra 5500 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2001 Sterling Acterra 5500?
Out of 13 Fuel and Emissions Systems for the 2001 Sterling Acterra 5500, the most popular in our inventory are:
from
$81.99
This product is not rated
Fuel/Water Separator Spin-on with Drain, Square Sensor Port and Reusable Sensor
Fuel and Water Separators
from
$87.99
This product is not rated
Fuel/Water Separator Spin-on with Sensor Port, Drain and Reusable Sensor
Fuel and Water Separators
from
$59.99
This product is not rated
Fuel/Water Separator Spin-on with Drain, Oval Sensor Port and Reusable Sensor
Fuel Separators
