Saturn SL Series Steering and Chassis Parts
Top Saturn SL Series Steering and Chassis Parts Categories
We carry over 64 Steering and Chassis Parts in inventory for the Saturn SL Series. If you’re looking for aftermarket Steering and Chassis Parts for your Saturn SL Series, check out all these categories:
Essential Saturn SL Series Steering and Chassis Parts
Dorman – RACK BELLOW (Part No.541-546)
from
$36.99
RACK BELLOW
Lares – Remanufactured Power Steering Pump (Part No.2283)
from
$77.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
National – Multi-Purpose Seal (Part No.7013S)
from
$22.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-153)
from
$208.99
CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100 percent performance testing to ensure perfect fit, function and reliable performance.
- 100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100 percent new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.36051)
from
$61.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)
from
$438.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Driveworks – Steering Tie Rod End (Part No.DW-ES3238RL)
from
$21.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Rare Parts – Sway Bar Link Kit (Part No.RP16818)
from
$64.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.36044)
from
$86.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Driveworks – Steering Tie Rod End (Part No.DW-EV260)
from
$44.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK5313)
from
$67.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Powercraft – Upper Pinion Bearing Kit (Part No.8571)
from
$34.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-590)
from
$8.99
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Power Steering Pump Pulley (Part No.300-250)
from
$30.49
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Strut Rod Bushing (Part No.DW-K8763B)
from
$5.49
Strut Rod Bushing
Dorman – Sway Bar Kit (Part No.927-124)
from
$217.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
BBB Industries – Power Steering Filter (Part No.991-FLT1)
from
$7.99
Power Steering Filter
Driveworks – Camber Bolt Kit (Part No.DW-K90474)
from
$20.49
Driveworks Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. Driveworks Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Chassis parts have been engineered and manufactured under the proven quality systems. Driveworks Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.
Product Features:
See More
Product Features:
- Designed to meet OE Form, Fit, and Function.
- Performance tested to ensure durability and reduce tire wear.
- Precision engineered for improved ride and steering response.
- Hardware included for ease of installation (where applicable)
Powercraft – Rack Pinion Seal Kit (Part No.8817)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8624)
from
$26.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Toe Adjust Kit (Part No.RP17045)
from
$87.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
See More
MOOG – Strut Alignment Camber Kit (Part No.K90474)
from
$35.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Saturn SL Series Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Saturn SL Series
You love your SL Series. So we’ve made it easier than ever to help you find Saturn SL Series Steering and Chassis Parts in our online catalog. Our inventory holds 64 aftermarket and OEM Steering and Chassis Parts for your Saturn SL Series, ranging from $5.49 to $438.99.
We offer parts from 15 brands trusted to make quality Steering and Chassis Parts for your Saturn SL Series. Before you buy, take some time to read through customer reviews. We currently have 8,796 reviews of Saturn SL Series Steering and Chassis Parts from previous customers. Some of the top rated parts include Steering Tie Rod End with 4.4 stars and Control Arm with Ball Joint with 4.3 stars.
Find your SL Series Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Saturn SL Series part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Saturn SL Series
Our inventory holds Steering and Chassis Parts for your Saturn SL Series from 15 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Cardone, and DriveWorks, all of which can keep that Saturn happy.
We have Dorman parts available for your Saturn SL Series in categories like Power Steering Parts. Some of the top-rated Dorman parts in these categories are:
Top-Rated Imperial Steering and Chassis Parts
Leading Imperial Steering and Chassis Parts
We carry Imperial brand parts for your Saturn SL Series across several catalog categories, including Power Steering Parts. Some of our most reviewed Imperial parts include:
FAQs for Saturn SL Series Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Saturn SL Series?
Out of 64 Steering and Chassis Parts for the Saturn SL Series, the most popular in our inventory are:
What are the top-rated Saturn SL Series Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Saturn SL Series based on customer reviews/ratings are:
from
$48.99
(12)
Control Arm with Ball Joint
“Part was a perfect fit, easy to install and seems sturdy.”
from
$35.49
(9)
Strut Alignment Camber Kit
“It worked great. Just got my alignment done. It could’ve been a little expensive.”
