Saturn Sky Steering and Chassis Parts
Top Saturn Sky Steering and Chassis Parts Categories
We carry over 27 Steering and Chassis Parts in inventory for the Saturn Sky. If you’re looking for aftermarket Steering and Chassis Parts for your Saturn Sky, check out all these categories:
Essential Saturn Sky Steering and Chassis Parts
Carquest Premium – Steering Angle Sensor Connector (Part No.PTA2167)
from
$101.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Carquest Premium – Return Hose Assembly (Part No.40303)
from
$71.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Zinc coated tubes protect against rust and corrosion
- Heat/abrasion tubing protects vital areas
MOOG – Caster/Camber Adjusting Kit (Part No.K100384)
from
$73.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Provides adjustment for camber and caster changes
- Easy to install
- Construction and design validated by MOOG engineers
- Provides improved steering and handling feel
- Long-lasting performance
- Broad coverage for foreign and domestic applications
Dorman – Propeller Shaft CV Joint Kit (Part No.932-108)
from
$189.99
This drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to collision damage, water infiltration or road debris contamination
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Cardone – Power Steering Filter (Part No.20-0012F)
from
$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
MOOG – Stabilizer Bar Link (Part No.K750072)
from
$47.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Stabilizer Bar Link (Part No.K750071)
from
$47.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Cardone – Power Steering Pump (Part No.21-5192)
from
$108.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Rare Parts – Tie Rod End (Part No.RP28973)
from
$52.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
ACDelco – Advantage Steering Tie Rod End (Part No.M3010608386ACD)
from
$37.98
ACDelco Advantage Steering Tie Rod Ends are economical replacement components for your GM and non-GM vehicle. They connect your vehicle’s steering linkage to the steering knuckle. These dependable aftermarket steering tie rod ends offer quality and performance, all at an economical price.
Product Features:
See More
Product Features:
- Superb strength for durability
- Consistent torque for smooth operation
- Full ball stud
- Low-friction double bearing for high impact resistance
- Undergo extreme impact, wear, and fatigue testing to ensure quality and durability
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Carquest Premium – Pressure Hose Assembly (Part No.37357)
from
$72.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Cardone – Rack and Pinion Assembly (Part No.22-385)
from
$235.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Carquest Premium – Chassis Wiring Harness Connector (Part No.PTA2913)
from
$90.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Suspension Control Arm (Part No.524-592)
from
$205.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.526-661)
from
$205.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Control Arm and Ball Joint Assembly (Part No.RK622385)
from
$204.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.524-591)
from
$205.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.526-662)
from
$205.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Saturn Sky Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Saturn Sky
You love your Sky. So we’ve made it easier than ever to help you find Saturn Sky Steering and Chassis Parts in our online catalog. Our inventory holds 27 aftermarket and OEM Steering and Chassis Parts for your Saturn Sky, ranging from $11.49 to $235.99.
We offer parts from 9 brands trusted to make quality Steering and Chassis Parts for your Saturn Sky. Before you buy, take some time to read through customer reviews. We currently have 2,184 reviews of Saturn Sky Steering and Chassis Parts from previous customers. Some of the top rated parts include Power Steering Filter with 5.0 stars and Power Steering Filter with 5.0 stars.
Find your Sky Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Saturn Sky part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Saturn Sky
Our inventory holds Steering and Chassis Parts for your Saturn Sky from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Cardone, and Moog, all of which can keep that Saturn happy.
We have MOOG parts available for your Saturn Sky in categories like Sway Bars. Some of the top-rated MOOG parts in these categories are:
Top-Rated Imperial Steering and Chassis Parts
Leading Imperial Steering and Chassis Parts
We carry Imperial brand parts for your Saturn Sky across several catalog categories, including Power Steering Parts. Some of our most reviewed Imperial parts include:
FAQs for Saturn Sky Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Saturn Sky?
Out of 27 Steering and Chassis Parts for the Saturn Sky, the most popular in our inventory are:
What are the top-rated Saturn Sky Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Saturn Sky based on customer reviews/ratings are:
from
$48.49
(2)
Power Steering Filter
“installed on return line to power steering pump no problems with leaks”
from
$14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses.
11/32″ is an odd size hose. Th”
