Saab 9000 Engine Parts

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

• The sensors provide accurate readings from the gap between sensor contact and element due to its design
• Manufactured to meet or exceed OE requirements
• Enhanced sensing functionality helps reduce emissions, improve reliability and drivability
• Not impacted by temperature changes and provide robust, long-lasting sensor protection
• Designed digital output for maximum signal to noise ratio

Turbo Inlet Gasket

Crankshaft Gear

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
• PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
• OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
• EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
• ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to SAAB 86-89;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1986-1989
• Weight approx: 2 Lbs

Powerbond Premium OEM Replacement Balancers are manufactured using premium ductile iron castings and injection bonded dampening rubber. Unlike typical original equipment balancers that are made with press inserted dampening rubber, the bonded dampening rubber in the Powerbond Premium OEM Replacement Balancer provides superior bonding strength between the inner and outer balancer rings that minimizes spinning and dislocation in high torque and serpentine belt appplications. With a unique combination of high strength castings, bonded dampening rubber, and dynamic balance, the Powerbond Premium OEM Replacement Balancer is the ultimate standard replacement balancer.

Product Features:

• Designed as a premium OE replacement
• Dynamically balanced for smooth operation
• Strong Iron casting for maximum strength
• OEM equivalent bonded rubber

WARNING: This item cannot be returned for a replacement or refund if opened! Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials. All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions. Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

• Produced from spring steel for long-lasting flexibility of beads
• Thermal stability up to 600F
• Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
• Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
• Tightening instructions provided with each gasket for perfect results

Seal Ring – Copper

Product Features:

• Brand may vary by location

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Timing Chain

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Dayco Timing Belt Component Kits are manufactured to meet the critical OE quality fit, form and function requirements demanded by both domestic and imported vehicle manufacturers to ensure long lasting peak performance. This Kit contains application specific instructions and extended warranty options if replaced with a Dayco Timing Belt.

Product Features:

• Application specific instructions
• Eliminate the need to pay high automotive dealership prices
• Designed for replacement of worn or damaged OEM timing belt tensioners and idler pulleys
• Meets or exceeds OE quality

Camshaft Gear

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
• SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
• EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Made of stainless steel
• Designed to prevent timing cover seal leaks
• Takes up gaps caused by worn-out harmonic balancer shafts

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. Glyco developed G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

• Original Equipment Quality
• Excellent wear resistance
• Low propensity to seize
• Reduction in Friction

Vander ell have been manufacturing the worlds finest engine bearings since the 1930’s. The Vander ell name became well known during the 1950’s when the company operated the Vanwall racing team with drivers such as Sterling Moss and Tony Brooks. Ever since, Vander ell have been manufacturing engine bearings for the most arduous applications, and in particular for motorsport. Vander ell is now part of the MAHLE group, so the best bearings in the world are now united with the best pistons in the world.

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Bushing only (does not include bracket) to fit upper rear mount behind cylinder head (on passenger’s side of engine compartment). This bushing fits both vertical (mount) and horizontal (torque rod) elements of this mount assembly. The existing bracket (horizontal and/or vertical element) is reused after pressing the old bushing out of the bracket and pressing a new 75 76 333 bushing in its place. We stock Special Tool #”SAABTOOL”, this tool is designed to Press Out the old bushing and Press In the New

Balance Shaft Gear

ContiTech Timing Belt Kits come complete with all the synchronous parts needed to do a timing belt repair quickly and efficiently. Professional repair technicians only need one box to do the entire job. And drivers enjoy a safe and reliable product that stands the test of time. On average, it takes about 2-4 hours to do a timing belt repair whether professional repair technicians replace just the belt or all the corresponding parts at the same time. Since the time and difficulty is already allocated to do the repair, the return on labor hours is greater when changing the entire drive belt system. From the belt to the tensioner and/or idler, all ContiTech Timing Belt Kits contain only OE-quality components. In fact, many of ContiTech kits exceed OEM quality specifications.

Product Features:

• OE-Equivalent and a direct fit application.
• Precision molded teeth.
• Low noise operation.
• Resistant to high temperatures.
• Durable long life performance.