Saab 9-4X Wheels and Tires

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

• Engineered for OE fit, form and function
• Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
• High-quality steel and surface treatments for proper fit and endurance
• Roll-form bearing design applies exact preload for increased durability (where applicable)
• Bearings and seals are engineered to the requirements of each specific vehicle application
• Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

Product Features:

• RELIABLE PERFORMANCE – Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
• EXTENDED SERVICE LIFE – Application-specific advanced raceway design reduces stress, rotation and heat on components
• KEEPS WATER AND DIRT OUT – Quad lip seal design inhibits damage by keeping moisture and other contaminants out
• EASY TO INSTALL – Engineered and designed for fast, hassle-free installation
• CORROSION PROTECTION – Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

SplineDrive Installation tool for use only with McGard SplineDrive lug nuts with a M14x1.5 thread size. This product may contain globally sourced materials/components.

Product Features:

• For use only with McGard SplineDrive lug nuts with a M14x1.5 thread size.
• Installation Tool has 22mm Hex Size

SplineDrive Installation tool for use only with McGard SplineDrive lug nuts with a M14x1.5 thread size. This product may contain globally sourced materials/components.

Product Features:

• For use only with McGard SplineDrive lug nuts with a M14x1.5 thread size.
• Installation Tool has 1″ Hex Size
• Bulk Box of 10 Installation Tools

Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:

• Guaranteed for life not to rust, chip, or peel.
• Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.

Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:

• Guaranteed for life not to rust, chip, or peel.
• Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For aluminum wheels only.
• Requires 65301 or 65302 Installation Tool sold separately.

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• Black anodized clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
• 0.453″ rim hole compatibility
• 200 PSI maximum cold inflation pressure

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

• Includes 4 Rubber Press-in Valve Stems
• Compatible with Autel 1-Sensors
• Compatible with Autel 315MHz & 433MHz MX-Sensors
• Warranty on Material and Workmanship
• High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, & tools.

Product Features:

• Chrome clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
• 0.453 in. rim hole compatibility
• 200 PSI maximum cold inflation pressure

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
• 0.453″ rim hole compatiblity
• 200 PSI maximum cold inflation pressure

Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:

• For use on “Tuner” wheels or wheels with very small lug nut holes.
• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For aluminum wheels only.

Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.

The CV-001 is a black metal press-in valve stem for the 1-Sensor.

Product Features:

• Black Metal Press-in Valve Stem
• Compatible with Autel 1-Sensor

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

Product Features:

• Programmable – Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others.
• Always up-to-date with the new programming function via the TPMS diagnostic tool
• Reprogrammable and Copy Clone Capable
• Full WAL and PAL technology support for auto-locate.
• Rubber valve included.

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

• MX-Sensor Components
• 4 Metal Valves
• 4 Rubber Valves
• Rubber Gasket (2×10 pcs)
• Screw Nut (2×10 pcs)
• Washer (2×10 pcs)
• Metal Valve Cap (2X10 pcs)
• Rubber Valve Cap (2X10 pcs)
• Valve Core (2X10 pcs)

Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.

Product Features:

• DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
• DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• Replacement components in Schrader TPMS service kits are sensor specific
• The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention
• OE fit, form, and function
• Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
• The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention

Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. . All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.

Product Features:

• DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
• DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• Each kit includes a fully assembled Schrader rubber valve assembly and mounting screw
• Valve cores are designed to OE specifications
• Replacement components in Schrader TPMS service kits are sensor specific
• OE fit, form, and function
• The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention

The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
• Set of 20 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch

The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For aluminum wheels only.
• Set of 20 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch

The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:

• User friendly key guides the key into the lock pattern for easy installation and removal.
• The computer generated key designs allow for an infinite number of key patterns.
• The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
• Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
• McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
• For aluminum wheels only.
• Set of 20 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch

The MX-Sensor 1-SensorM Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-SensorM features a combined frequency of 315MHz & 433MHz with metal valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-SensorM is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve.
• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz & 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve.
• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
• Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
• Combined Frequency 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• Schrader Programmable EZ-sensor with Rubber Snap-In Valve – Must be Programmed to Specific M/M/Y Vehicle
• Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
• Easy to program and covers the majority of vehicles on the road in North America
• Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
• Sensor comes fully assembled and ready to program and install
• Engineered and manufactured to OEM design and quality specifcations
• Future-proofed OE quality TPMS product supports new and pending OE technologies
• Aluminum valve can be replaced by Schrader clamp-in valve kit 29049

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

Product Features:

• Programmable – Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others.
• Always up-to-date with the new programming function via the TPMS diagnostic tool
• Reprogrammable and Copy Clone Capable
• Full WAL and PAL technology support for auto-locate.
• Metal valve included.
• Flexible valve angle 0 to 36 degrees.