Saab 9-3 Ignition and Tune-Up Products

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. Built to ISO and SAE standards, it offers dependable performance and durability. The OE type replacement plug resists fouling and boasts superior corrosion resistance. The copper core center electrode allows for accurate control of heat range for longer life, while the nickel center electrode tip material ensures consistent performance. With a flat seat type and resistor type, this spark plug is designed for proven performance in small engines.

Product Features:

• Copper Plus – Dependable Performance and Durability
• OE type replacement plug
• Resists fouling
• Copper core center electrode allows for accurate control of heat range for longer life
• Superior corrosion resistance
• Built to ISO and SAE standards for proven performance
• Consistent Performance: Equipped with a nickel center electrode tip material and a flat seat type, this spark plug ensures consistent performance in small engines.

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.68 is a 14mm, 1.000 reach plug with a gasket seat. It fits a wide variety of late model applications, especially Hemi applications. E3.68 is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

• E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
• Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
• Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
• Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
• E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
• The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
• Wide Compatibility: E3.68 spark plugs are 14mm with a 1.000 reach and a gasket seat, fitting a wide variety of late model applications, especially Hemi engines.
• Enhanced Heat Transfer: The three legs securing the Diamond FIRE electrode to the shell ensure excellent heat transfer and create more turbulence in the cylinder for better combustion.
• Widely Available: E3.68 spark plugs are widely stocked in automotive retail stores, making them easily accessible for consumers.

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
• Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Manufactured using high-quality materials to provide superior durability and long service life
• Designed and engineered to ensure precise performance
• Thermoplastic housing withstands heat stress for enhanced durability
• Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
• External core made from oriented silicon steel ensures durability and longevity
• Neodymium magnet produces max high voltage output at all speeds
• Stainless steel spring resists corrosion
• Tin-plated brass terminals improve electrical contact and protect against corrosion

Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:

• Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
• Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
• Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
• We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

• Provides excellent heat resistance as well as maximum protection against spark loss.
• Durable silicone compound for resistance to high heat or abrasion
• Spring included with the coil boot
• Design for direct compatibility
• OE design provides an exact fit for your application
• Multipack provides one time replace all COP for better deal

The Professional Parts Sweden Ignition wire set is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:

• OEM quality
• OEM connectors for easy Installation.
• Resistant to high temperatures, corrosion and vibration.
• Ignition noise suppressed.
• Reduces the chance of misfire

ACDelco Professional Direct Ignition Coil Boots serve as the electrical connection between the coil and the spark plug. They act as insulators, helping keep moisture and contaminants out of the connection, and are a high quality replacement for many vehicles on the road today. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:

• Weather tight boot seal helps protect from moisture intrusion
• High temperature resistant silicone helps protect against thermal overload
• Stainless steel internal spring with resistor suppresses RFI and helps deliver maximum voltage to the spark plug
• Provides the performance and dependability you expect from ACDelco

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

• PREMIUM GRADE SILICONE: Designed to withstand harsh environments
• OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

• OE design ensures a tight boot seal that protects against moisture intrusion
• High temperature resistant material provides greater protection against thermal overload
• Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
• Engineered to the specifications used by the original vehicle manufacturer for an exact fit

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

• PREMIUM GRADE SILICONE: Designed to withstand harsh environments
• OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

Ignition Switch

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
• Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
• Designed to meet or exceed all OEM specifications in fit, form & function
• Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

Bosch OE quality knock sensors for optimum engine protection and fuel consumption reduction up to 9%

Product Features:

• Bosch OE quality knock sensors for optimum engine protection
• Bosch OE quality knock sensors improve combustion efficiency and reduce fuel consumption up to 9%
• Bosch OE quality knock sensors increase torque up to 5%
• Bosch OE quality knock sensors enable the use of multiple quality fuels with various anti-knock properties

Bosch Knock Sensors are highly accurate and sensitive to detect engine knock, ensuring efficient performance and long life of your vehicle.

Product Features:

• High Precision Even under Extreme Conditions
• Improved efficiency and prolonged engine life
• Linear signal over large frequency range