Saab 9-2X Fluids

Pentosin ATF 1 is a fully synthetic high performance Automatic Transmission Fluid (ATF) for life-time application in automatic gear boxes. Pentosin ATF 1 is formulated by means of the best commercially available synthetic base oils and additive components. A high performance shear stable VI-Improver plus modern antiwear chemistry and friction modifiers guarantee a sound stable friction performance in modern automatic transmissions equipped with an electronically controlled converter clutch.

Prestone MAX European Vehicles Power Steering Fluid (PSF) + Stop Leak maximizes and increases system life + the power to stop leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. This formula is also great at preventing leaks by rejuvenating seals before they leak. This synthetic fluid is designed with 2X Anti-wear System Protection, which means more protection against pump failure, squeals and clogs. 100,000 mile fluid life, 2X more than conventional fluid, extends the time between replacement. This fluid is formulated for European vehicle manufacturers: Audi, BMW, Jaguar, Mini, Porsche, Mercedes, Saab, Volvo, Volkswagen and others. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Idemitsu Power Steering Fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.Idemitsu Premium PSF can be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid. CURRENTLY UNABLE TO SHIP THIS PRODUCT TO CUSTOMERS LOCATED IN CALIFORNIA. Volume: 5 gallons.

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. Idemitsu is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. Idemitsu application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made. Volume: 1 quart.

Quaker State 5W-30 motor oil is a synthetic blend formulation that helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection. Quaker State Motor Oil combats engine sludge and deposits, providing rust protection from harmful acids generated by engine contaminants. It reduces engine wear, providing durable wear protection. Quaker State 5W-30 Motor Oil meets or exceeds the following OEM requirements: Chrysler MS-6395; Ford WSS M2C946-A, Ford WSS M2C946-B1; GM 6094M. It exceeds the requirements of the following industry specifications: API SP and all previous categories; ILSAC GF-6a and all previous ILSAC standards. For a full list of equipment approvals and recommendations, please consult your local Quaker State Technical Help Desk and always consult your owner’s manual. Volume: 5 quarts.

Top Tec 4200 5W-30 Full Synthetic Engine Oil is engineered for exceptional performance and long-lasting engine protection. This low-SAPS oil is ideal for vehicles equipped with turbochargers and catalytic converters, ensuring smooth engine operation while reducing fuel consumption and pollutant emissions. Designed for compatibility with a wide range of Volkswagen, Audi, BMW, Mercedes-Benz diesel vehicles, and select Porsche models, it meets the demands of modern engines, including direct-injection gasoline and diesel systems like FSI, TDI, and common rail. Its advanced formula effectively minimizes deposit build-up, maintaining optimal engine performance and extending the life of diesel particulate filters (DPF). Perfect for vehicles with extended oil change intervals, it offers a cost-effective and convenient solution for long-term use. Made in Germany, this 5W-30 full synthetic oil delivers reliability, durability, and value, making it an excellent choice for drivers seeking to maximize engine efficiency and reduce maintenance costs.

Pennzoil Platinum Full Synthetic 5W-30 is designed to maximize engine protection and is backed by a 15,000-mile protection guarantee(1) (see Warranty Information below) to protect your pursuit of every mile. Made with natural gas, it is formulated for complete protection for top engine performance. Pennzoil Platinum offers cleaner pistons (based on Sequence IIIH results), helps protect engines from loss of power, delivers better fuel economy (based on the latest industry standard), provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides excellent performance in extreme temperatures. ((1)Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicle’s oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.) Volume: 6 gallons.

Prestone MAX DOT 4 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 75,000 mile fluid life, our longest life fluid has 1.5X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 4, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 4 is safe to use in all DOT 4 braking systems, ABS, disc or drum, and can mix with any DOT 4 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 4. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Prestone DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system.  This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid.  It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Prestone DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system.  This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid.  It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Prestone DOT 5.1 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards and is designed to handle the most extreme braking situations. Prestone DOT 5.1 is a high performance formula for extreme braking situations like racing. Formulated to protect against overheating and brake fade with a formula that exceeds DOT standards. This synthetic extended life fluid starts with higher dry boiling point vs. DOT standard protecting against performance decline due to water absorption. This formula is safe to use in all DOT 5.1 braking systems, ABS, disc or drum, and can mix with any DOT 5.1 fluid. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Valvoline Full Synthetic MaxLife Multi-Vehicle ATF, the No. 1 ATF product, suitable for use in millions of vehicles. Featuring advanced additives to prevent the major causes of transmission breakdown, it’s designed to help prevent leaks, reduce wear & tear, and maximize performance. Has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and frictional enhancements for smooth gear engagements. Valv MaxLife Multi-Vehicle ATF is recommended for use in: GM DEXRON-II, DEXRON-III, DEXRON-VI; Ford MERCON LV; and JASO M315-2013 1A-LV. Volume: 1 quart.

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Volume: 1 gallon.

Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extreme conditions and guarantees full performance from -40C to over 130C system temperature.

Autran Syn-295 Synthetic Transmission Fluid is a premium full-synthetic solution designed for heavy-duty automatic transmissions, meeting the rigorous Allison TES-295 and TES-468 standards. Engineered with high-viscosity index synthetic base fluids and advanced additives, it delivers exceptional wear protection, superior high and low-temperature performance, and outstanding shear stability. This fluid keeps transmissions cooler, resists oxidation, and offers excellent corrosion and foaming resistance, ensuring long-lasting reliability even under extreme operating conditions. Compatible with a wide range of OEM systems, including Allison C-4, Voith, and ZF transmissions, it is ideal for light-duty applications such as buses, emergency vehicles, delivery trucks, motor homes, and more. Whether for on- or off-highway use, this 1-gallon solution provides unmatched durability and performance, making it a trusted choice for demanding environments. Volume: 1 gallon.