Rover 105 Ignition and Tune-Up Products

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

An Ignition Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The ignition capacitor may also be called a radio capacitor or condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

• Black Onyx coating helps reduce corrosion
• Copper core provides great heat transfer and helps maximize plug durability
• Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
• Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
• Available for use in Marine applications
• Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
• Premium aftermarket replacement part
• Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

Ensure your engine runs smoothly and efficiently with this high-quality spark plug, designed to deliver reliable ignition and optimal performance. Engineered for durability and precision, it provides consistent spark energy to maximize fuel combustion, improving both power output and fuel efficiency. Built to withstand extreme temperatures and pressures, this spark plug ensures long-lasting performance, reducing the need for frequent replacements. Its compatibility with a wide range of vehicles makes it a versatile choice for maintaining peak engine functionality. Whether you’re looking to restore lost performance or maintain your vehicle’s reliability, this spark plug offers exceptional value and dependable operation.

Product Features:

• Designed for reliable ignition to ensure smooth and efficient engine operation.
• Enhances fuel combustion for improved power output and fuel efficiency.
• Built with durability to withstand extreme temperatures and pressures for long-lasting performance.
• Compatible with a wide range of vehicles, offering versatility for various engine types.
• Reduces the need for frequent replacements, providing exceptional value and dependable operation.

Double Platinum Spark Plug offers enhanced durability and performance with its platinum-to-platinum design, effectively reducing gap erosion and minimizing misfires for a longer service life. Engineered for distributor-less ignition system (DIS) engines, it outperforms copper and standard platinum plugs. The yttrium-enhanced ground electrode ensures superior heat transfer, maintaining durability under high temperatures and pressure. Its high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. Featuring a mid-projection center electrode and flat seat type, this performance-grade spark plug is built with platinum-tipped electrodes for consistent ignition and lasting reliability. Designed to deliver exceptional value, it is a dependable choice for maintaining peak engine performance.

Product Features:

• Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
• The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
• Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
• The multi-rib insulator prevents flash-over.
• Designed with a mid-projection center electrode and flat seat type to ensure consistent ignition and reliable performance in demanding conditions.

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

• Black Onyx coating helps reduce corrosion
• Copper core provides great heat transfer and helps maximize plug durability
• Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
• Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
• Available for use in Marine applications
• Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
• Premium aftermarket replacement part
• Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

Autolite Copper spark plugs are expertly crafted to ensure your vehicle delivers reliable performance with every start. Featuring a copper core center electrode, these plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrodes provide extended durability. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, offering superior strength under demanding conditions. Designed with a corrosion-resistant nickel-plated shell, these spark plugs are built to last. Their mid-projection center electrode and flat seat type ensure optimal compatibility, while the resistor design minimizes electrical interference. Engineered for quick starts, smooth acceleration, and enhanced fuel economy, these spark plugs are a dependable choice for maintaining your vehicle’s efficiency and performance.

Product Features:

• The copper core center electrode aids in thermal control and improves resistance to fouling.
• Its specially engineered high nickel alloy center and ground electrode provides extended life.
• The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
• Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
• Quick Starts and Smooth Acceleration: Designed to deliver quick starts and smooth acceleration, ensuring a reliable performance for your vehicle.
• Enhanced Fuel Economy: Engineered to provide good fuel economy, helping you save on fuel costs.

Autolite Copper spark plugs are expertly crafted to ensure quick starts and reliable performance for your vehicle or application. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrode deliver extended life and durability. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, providing superior strength under demanding conditions. With a nickel-plated shell, these spark plugs are corrosion-resistant, ensuring long-lasting durability. Designed to optimize fuel combustion, they improve fuel efficiency, helping you save money at the pump. Additionally, their advanced engineering promotes smoother and more responsive acceleration, enhancing your driving experience. With a standard center electrode design and short projection, these spark plugs are built for regular-grade applications, making them a reliable choice for maintaining peak engine performance.

Product Features:

• The copper core center electrode aids in thermal control and improves resistance to fouling.
• Its specially engineered high nickel alloy center and ground electrode provides extended life.
• The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
• Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
• Good Fuel Economy: Designed to optimize fuel combustion, these spark plugs help improve your vehicle’s fuel efficiency, saving you money at the pump.
• Smooth Acceleration: Experience smoother and more responsive acceleration with the advanced engineering of Autolite Copper Spark Plugs.
• Smooth Acceleration: Experience smoother and more responsive acceleration with the advanced engineering of Autolite Copper Spark Plugs.

The Copper Plus spark plug delivers dependable performance and durability, making it an ideal OE-type replacement for your vehicle. Featuring a copper core center electrode, it ensures precise heat control for extended lifespan and consistent wear. Its nickel-tipped center and ground electrodes enhance conductivity while resisting fouling, ensuring reliable ignition under various conditions. Built to ISO and SAE Standards, this spark plug offers proven performance and superior corrosion resistance, making it a trustworthy choice for maintaining your engine’s efficiency. With a flat seat type and standard-grade design, it provides a seamless fit and optimal functionality for standard replacement needs.

Product Features:

• Resists fouling
• Superior corrosion resistance
• Dependable and proven performance
• Increased conductivity and heat control for good overall wear

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

The Ignition Conversion Kit allows point type ignition systems to be converted to an electronic ignition type system. These universal kits are designed to fit directly into the current distributor with little modification required.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the manufacturer.