Ram ProMaster 3500 Ignition and Tune-Up Products
Top Ram ProMaster 3500 Ignition and Tune-Up Products Categories
We carry over 34 Ignition and Tune-Up Products in inventory for the Ram ProMaster 3500. If you’re looking for aftermarket Ignition and Tune-Up Products for your Ram ProMaster 3500, check out all these categories:
Essential Ram ProMaster 3500 Ignition and Tune-Up Products
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7101)
from
$7.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA5404)
from
$36.99
Ignition Knock (Detonation) Sensor
Delphi – Knock Sensor (Part No.AS10266)
from
$23.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
Carquest Premium – A/C Pressure Transducer Connector (Part No.PTA1151)
from
$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
NGK – Coil on Plug Boot (Part No.58965)
from
$8.49
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-016CMP)
from
$35.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, XU22HDR9 (Part No.3445)
from
$6.49
OE Performance, lasts 30K+ Miles, XU22HDR9. The unique U-Groove ground electrode is one of the finest features of DENSO spark plugs, designed to fire leaner mixtures than conventional plugs for improved ignitability. Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads, ensuring a secure fit. With a wide range of part numbers, these spark plugs cater to thousands of applications, including classic and collector cars. Built to last twice as long as most conventional plugs, each unit is 100% pre-fired to assure reliable operation. The center electrode tip is made of durable nickel, and the flat seat type ensures optimal performance.
Product Features:
See More
Product Features:
- Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
- Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
- Wide range of part numbers for thousands of applications, including classic and collector cars
- Lasts twice as long as most conventional plugs
- 100% pre-fired to assure reliable operation
- U-Groove Conventional
- Durable Nickel Center Electrode Tip: Provides long-lasting performance and durability, built to last twice as long as most conventional plugs.
- Flat Seat Type: Ensures optimal performance and a secure fit in a wide range of applications, including classic and collector cars.
NGK – Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LKR7BHX (Part No.94705)
from
$14.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.
Product Features:
See More
Product Features:
- HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
- RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
- PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
- Enhanced Fuel Burn: Provides a more complete fuel burn, resulting in quicker throttle response, smoother idle, and better cold starts.
- Industry-Leading Durability: Ruthenium center electrode ensures exceptional durability and longevity.
NGK – Laser Iridium Spark Plug (Part No.F100066430NGK)
from
$20.00
NGK’s Laser Iridium Spark Plugs Provide Superior Ignitability and Long Service Life. Fine Wire Iridium Tipped Center Electrode and Fine Wire Platinum Tipped Ground Electrode Ensures Slow Wear Rate Providing Stable Idle, Superior Anti Fouling, Improved Fuel Efficiency and Lower Emissions.
Product Features:
See More
Product Features:
- Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
- Corrugated Ribs Prevent Flashover
- Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
- Copper Core Aids in Heat Removal
- Triple Seals Prevent Leakage
Champion Spark Plugs – Spark Plug (Part No.F10001168300CSP)
from
$12.97
Spark Plug
Carquest Premium – Ignition Capacitor (Part No.GAA1128)
from
$9.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Bosch – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.0221504048)
from
$53.99
Benefits of Bosch original equipment quality ignitions coils include the right ignition voltage, long lasting spark, better engine running conditions, lower fuel consumption, and reduced exhaust emissions.
Product Features:
See More
Product Features:
- Meets or exceeds OEM specification
- Ensures reliable voltage for smooth engine performance
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1319)
from
$39.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Delphi – Ignition Coil (Part No.GN10616)
from
$53.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48755)
from
$45.49
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest – Ignition Coil (Part No.E1148)
from
$39.99
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
- Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
- Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output
- Neodymium magnet produces max high voltage output at all speeds
- Stainless steel spring resists corrosion
- Tin-plated brass terminals improve electrical contact and protect against corrosion
- High-dielectric epoxy injected into case and pulled into vacuum to eliminate air pockets and prevent moisture intrusion or thermal breakdown
- Silicone rubber boot withstands extreme heat to ensure superior insulation
Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 6 Count (Part No.EBC1002-6)
from
$174.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1002)
from
$39.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
DENSO – Coil On Plug Boots-6 (Part No.671-6309)
from
$47.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
Ram ProMaster 3500 Ignition and Tune-Up Products Categories
Helping You Find the Right Ignition and Tune-Up Products for Your Ram ProMaster 3500
You love your ProMaster 3500. So we’ve made it easier than ever to help you find Ram ProMaster 3500 Ignition and Tune-Up Products in our online catalog. Our inventory holds 34 aftermarket and OEM Ignition and Tune-Up Products for your Ram ProMaster 3500, ranging from $5.29 to $174.99.
We offer parts from 12 brands trusted to make quality Ignition and Tune-Up Products for your Ram ProMaster 3500. Before you buy, take some time to read through customer reviews. We currently have 4,202 reviews of Ram ProMaster 3500 Ignition and Tune-Up Products from previous customers. Some of the top rated parts include OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SILZKR7B11 with 5.0 stars and Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXUH22I with 4.6 stars.
Find your ProMaster 3500 Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ram ProMaster 3500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Ignition and Tune-Up Products Brands for Your Ram ProMaster 3500
Our inventory holds Ignition and Tune-Up Products for your Ram ProMaster 3500 from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like Champion, Autolite, and NGK, all of which can keep that Ram happy.
We have Carquest Premium parts available for your Ram ProMaster 3500 in categories like Ignition Boots. Some of the top-rated Carquest Premium parts in these categories are:
from
$7.49
(1)
Coil On Plug Insulator Boot: Spring included, Designed for direct fit
Spark Plug Boots
Top-Rated Champion Ignition and Tune-Up Products
Leading Champion Ignition and Tune-Up Products
We carry Champion brand parts for your Ram ProMaster 3500 across several catalog categories, including Spark Plugs. Some of our most reviewed Champion parts include:
FAQs for Ram ProMaster 3500 Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the Ram ProMaster 3500?
Out of 34 Ignition and Tune-Up Products for the Ram ProMaster 3500, the most popular in our inventory are:
from
$9.99
(48)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$17.49
(117)
Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SXU22HCR11S
Spark Plugs
What are the top-rated Ram ProMaster 3500 Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your Ram ProMaster 3500 based on customer reviews/ratings are:
from
$19.99
(57)
OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SILZKR7B11
“NGK has always had a great reputation for quality plugs and these Iridium Laser spark plugs are no exception. I installed them in my 2018 Dodge Chall”
from
$13.29
(43)
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXUH22I
“right part first – time – car runs better with the refreshed plugs”
