Porsche 912 Brake Parts

Essential Porsche 912 Brake Parts

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD31)

Brake Pads: Reliable and Dependable Stopping

from

$32.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N1000670578ZXC)

Coat-Z Sport Brake Disc (Rotor)

from

$124.90
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • Better wet braking performance by permanent expulsion of brake dust and water
  • Sporty look
  • Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
  • Noticeable improvement in the braking power of your car
  • Prevention of brake fade
  • Countersinking of holes doubles up as wear indicator
  • 1:1 exchange of original disc possible
  • No additional adaption necessary
  • Not subject to registration: general ABE certification supplied with disc
See More

FTE – FTE Brake Hose (Part No.N700082188FTE)

FTE Brake Hose

from

$18.30
FTE automotive has decades of experience in the development and production of brake hoses for OEMs and the spare parts market. FTE brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:
  • Excellent pulse strength for use on vehicles with ESP, ABS, DSC and ASR
  • Very high ozone resistance, temperature change resistance and so a long service life
  • Low water permeation and so extended service life of the brake fluid
  • Use of robust hose valve connections and additional safety and shrink-fitted hoses in various materials.
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

FTE – Brake Caliper Repair Kit (Part No.N105022650FTE)

Brake Caliper Repair Kit

from

$18.09
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

ATE – Brake Caliper Repair Kit (Part No.N105022429ATE)

Brake Caliper Repair Kit

from

$26.23
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Elring – Distributor O-Ring (Part No.F210154475ELR)

Distributor O-Ring

from

$1.18
The Elring Distributor O-Ring is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ATE – ATE Brake Master Cylinder (Part No.N300022652ATE)

ATE Brake Master Cylinder

from

$489.65
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

Original Equipment – Parking Brake Shoe (Part No.N500028310OEA)

Parking Brake Shoe

from

$32.10
Parking Brake Shoe

Sebro – Coated Brake Rotor (Part No.N100022426SEB)

Coated Brake Rotor

from

$125.13
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Carquest Premium Gold – Brake Pads Without Hardware, Ceramic, Long Pad Life, Quiet Braking (Part No.GNAD31)

Brake Pads Without Hardware, Ceramic, Long Pad Life, Quiet Braking

from

$43.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications, provides better value and
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Helping You Find the Right Brake Parts for Your Porsche 912

You love your 912. So we’ve made it easier than ever to help you find Porsche 912 Brake Parts in our online catalog. Our inventory holds 11 aftermarket and OEM Brake Parts for your Porsche 912, ranging from $1.18 to $489.65.

We offer parts from 9 brands trusted to make quality Brake Parts for your Porsche 912. Before you buy, take some time to read through customer reviews. We currently have 276 reviews of Porsche 912 Brake Parts from previous customers.

Find your 912 Brake Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Porsche 912 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Brake Parts Brands for Your Porsche 912

Our inventory holds Brake Parts for your Porsche 912 from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Cardone, Carquest Premium, and Carquest, all of which can keep that Porsche happy.
We have Cardone parts available for your Porsche 912 in categories like Brake Master Cylinders. Some of the top-rated Cardone parts in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders