Pontiac G8 Performance and Racing Products
Top Pontiac G8 Performance and Racing Products Categories
We carry over 28 Performance and Racing Products in inventory for the Pontiac G8. If you’re looking for aftermarket Performance and Racing Products for your Pontiac G8, check out all these categories:
Essential Pontiac G8 Performance and Racing Products
Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)
from
$551.99
Edelbrock #8895 Water Pump GM gen III ls1 & gen iv ls engines insert style ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “supe
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.750 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 6.00 in. Block To Hub Height
- Natural Finish
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)
from
$491.99
LS Cast Iron Exhaust Manifold
Mr. Gasket – Ls1 Late Thermostat (Part No.6367)
from
$37.99
Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.
Product Features:
See More
Product Features:
- Opens sooner than stock at 160 degrees
- High flow design for performance applications
- Includes rubber o-ring seal/gasket
- Incorporates pressure relief valve
Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam (Part No.54-412-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Diablosport – Trinity 2 (Part No.9200)
from
$666.99
Trinity 2
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Product Features:
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-7003)
from
$13.99
K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer’s recommended service intervals.
Product Features:
See More
Product Features:
- High performance design for outstanding filtration
- High-efficiency media with uniform pleats
- Allows for high oil flow rates
- Ideal for high-end synthetic motor oil
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
NOS/Nitrous Oxide Systems – NOS Plate Wet Nitrous System – GM (Part No.05164BNOS)
from
$1463.00
Product Features:
See More
- Fits GM LS engines with drive-by-wire style 90mm or 92mm throttle body
- Includes jetting for 100, 125, & 150 horsepower
- Fits Holley and Sniper EFI , or MSD Atomic intake manifolds
- This wet kit provides exceptionally smooth power delivery
- Single 90mm ╜ inch thick black plate between the throttle body and manifold
- Bottle is made from 6061-T6 Aluminum
- Supports up to 250 RWHP (jets purchased separately)
- Includes a 10 lb. black nitrous bottle with brackets
Spectre – Spectre Air Intake Kit (Part No.9907)
from
$229.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
- Product might not be available in all states due to local laws.
Hays – Flywheel: GM Ls-1 30Lb Steel (Part No.10-730)
from
$527.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
NOS/Nitrous Oxide Systems – LS2 Plate; Nitrous System (Part No.05169NOS)
from
$1500.99
The NOS LS2 plate system uses a billet plate with no spray bars. This unique design allows better atomization which prevents fuel puddles in your manifold and provides the best cylinder to cylinder distribution for maximum power. This is no ordinary low HP kit. The plate and Solenoids supplied will easily support 200HP.
Product Features:
See More
Product Features:
- Adjustable Up to 250 HP
- Includes Required Hardware For Most Applications
- On Demand Power
- Does Not Affect Daily Driving Characteristics
- Best Horsepower Per Dollar Modification Available
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.63-3071)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter (Part No.63-3072)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Pontiac G8 Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Pontiac G8
You love your G8. So we’ve made it easier than ever to help you find Pontiac G8 Performance and Racing Products in our online catalog. Our inventory holds 28 aftermarket and OEM Performance and Racing Products for your Pontiac G8, ranging from $13.99 to $1,870.00.
We offer parts from 10 brands trusted to make quality Performance and Racing Products for your Pontiac G8. Before you buy, take some time to read through customer reviews. We currently have 458 reviews of Pontiac G8 Performance and Racing Products from previous customers. Some of the top rated parts include Spectre Air Intake Kit with 4.0 stars and XFI XE-R 224/230 Hydraulic Roller Cam with 3.0 stars.
Find your G8 Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Pontiac G8 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Pontiac G8
Our inventory holds Performance and Racing Products for your Pontiac G8 from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Mr. Gasket, and Competition Cams, all of which can keep that Pontiac happy.
We have K&N parts available for your Pontiac G8 in categories like Performance Air Intake Kits and Performance Oil Filters. Some of the top-rated K&N parts in these categories are:
from
$367.99
(1)
Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter
Engine Cold Air Intakes
from
$17.99
(133)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
Performance Oil Filters
from
$367.99
(3)
Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter
Engine Cold Air Intakes
FAQs for Pontiac G8 Performance and Racing Products
What are the most purchased Performance and Racing Products for the Pontiac G8?
Out of 28 Performance and Racing Products for the Pontiac G8, the most popular in our inventory are:
from
$13.99
This product is not rated
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
Performance Oil Filters
from
$541.99
This product is not rated
XFI XE-R 232/234 Hydraulic Roller Cam
Performance Engine Camshafts
What are the top-rated Pontiac G8 Performance and Racing Products?
Top-rated Performance and Racing Products for your Pontiac G8 based on customer reviews/ratings are:
from
$229.99
(15)
Spectre Air Intake Kit
“The factory airbox with an AC Delco filter flows great from the factory. Its downfall is in the elbow tube with the sound resonators built into it. ”
from
$541.99
(2)
XFI XE-R 224/230 Hydraulic Roller Cam
“I had it about a month now In my 1987 Buick Grand National WE4 (limited lightweight edition). My old one got chewed up by my reluctor wheel because t”
