Pontiac Exhaust System Kits

When an exhaust manifold fastener breaks on certain General Motors and Isuzu vehicles, repairing it conventionally usually requires significant labor, up to and including removing the cylinder head. This Dorman OE FIX repair clamp saves time by creating a seal without needing to extract the broken stud.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
• Location-specific – engineered to fit the exhaust manifold on specified GM and Isuzu vehicles on the front right on vehicles without EGR valve, or rear left
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:

• KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
• CONSISTENT PERFORMANCE – Spring designed with the right compression strength for a secure connection
• PREMIUM MATERIALS – Made from high-quality materials for durability and long life
• THE RIGHT CONNECTION – Designed to be used for ball and socket joint
• BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15693 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15693 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15693 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• Dyno-proven performance
• CNC precision robotic manufacturing techniques

Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:

• KEEPS EXHAUST PARTS IN PLACE : Designed to support undercar exhaust components
• CONSISTENT PERFORMANCE : Spring designed with the right compression strength for a secure connection
• PREMIUM MATERIALS : Made from high-quality materials for durability and long life
• THE RIGHT CONNECTION : Designed to be used for ball and socket joint
• BETTER TOGETHER : Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Super Competition Cat-Back Exhaust System

Super Competition Cat-Back System Black Finish Mufflers with Aluminized Tubing

Product Features:

• Exit At Stock Locations
• Mandrel Bent Not Press Bent
• Mandrel Bent Not Press Bent
• Maximum Flow
• Uses Existing Stock Hangers
• Large Diameter 16 Ga. Aluminum Tubing
• Low Back Pressure and Long Life
• Easy Installation

Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:

• KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
• CONSISTENT PERFORMANCE – Spring designed with the right compression strength for a secure connection
• PREMIUM MATERIALS – Made from high-quality materials for durability and long life
• THE RIGHT CONNECTION – Designed to be used for ball and socket joint
• BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

When an exhaust manifold fastener breaks on certain General Motors and Isuzu vehicles, repairing it conventionally usually requires significant labor, up to and including removing the cylinder head. This Dorman OE FIX repair clamp saves time by creating a seal without needing to extract the broken stud.

Product Features:

• Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
• Location-specific – engineered to fit the exhaust manifold on the front left or rear right on specified GM and Isuzu vehicles
• Complete kit – includes clamp and fasteners for a thorough, secure repair
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Designed and manufactured to meet the needs of the exhaust system repair environment.
• Verified, tested and certified proprietary Organic coating resists corrosion.
• Tightly controlled coefficient of friction ensures reliable installation.
• Application specific kit contents
• Self-locking nuts (where applicable).

BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.

Product Features:

• Designed to facilitate hassle-free exhaust repair
• Precise fitment
• Manufactured from quality materials to ensure maximum durability
• Quality construction materials to ensure safe and secure exhaust system performance and a long service life
• Manufactured according to strict OE standards
• Sturdy design featuring premium-grade materials
• Compatible with multiple domestic and import vehicles

BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.

Product Features:

• Designed to facilitate hassle-free exhaust repair
• Precise fitment
• Manufactured from quality materials to ensure maximum durability
• Quality construction materials to ensure safe and secure exhaust system performance and a long service life
• Manufactured according to strict OE standards
• Sturdy design featuring premium-grade materials
• Compatible with multiple domestic and import vehicles

Give your vintage vehicle’s exhaust system an upgrade with a DynoMax dual header kit. Designed to attach with OE headers, it features a special reducer that allows for a variety of mounting options.

Product Features:

• COMPATIBILITY : Designed for 1978-1987 midsize sedans such as Oldsmobile Cutlass, Chevrolet Monte Carlo, Buick Regal and Pontiac Grand Prix; see product information for compatibility and engine specifications
• BUILD IT YOURSELF : Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
• FLEXIBLE MOUNTING : Special reducer design allows for a variety of mounting options
• IMPROVED FLOW CAPACITY : Smooth bends improve flow capacity over traditional bends
• SPECS : Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit on each side of vehicle at rear bumper
• COMPLETE SOLUTION : Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
• PREMIUM MATERIALS: Made from quality aluminized steel for durability and long life
• BETTER TOGETHER : Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
• WARNING : Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use

Product Features:

• Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

The MagnaFlow 2005-2006 Pontiac GTO Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 6.0L 2005-2006 Pontiac GTO with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 16734 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16734’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100 percent durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

Product Features:

• Each system is supplied with a high-efficiency stamped crossover & high-flow TIG-welded 304 SS absorption mufflers
• OE quality hardware (clamps, hanger rods and rubber isolators) provided to ensure excellent fitment and a leak free installation
• Provides compatibility with stock parking brake cables
• Both kits are supplied with turn-down style exits under the rear quarter panels
• Stainless steel straight through designed absorption mufflers for a muscle car sound without the resonance.
• Constructed of mandrel bent stainless steel tubing
• Works with Hooker long tube headers

Product Features:

• Each system is supplied with a high-efficiency stamped crossover & high-flow TIG-welded 304 SS absorption mufflers
• OE quality hardware (clamps, hanger rods and rubber isolators) provided to ensure excellent fitment and a leak free installation
• Provides compatibility with stock parking brake cables and Ridetech/Fatman Fabrications 4-link suspensions (an industry exclusive feature in an off-the-shelf package)
• Both kits are supplied with turn-down style exits under the rear quarter panels
• Optional polished under-bumper and dual “Formula” style tips (2.5″ system only) available

Product Features:

• Each system is supplied with a high-efficiency stamped crossover & high-flow TIG-welded 304 SS absorption mufflers
• OE quality hardware (clamps, hanger rods and rubber isolators) provided to ensure excellent fitment and a leak free installation
• Kits are supplied with turn-down style exits under the rear quarter panels
• Stainless steel straight through designed absorption mufflers for a muscle car sound without the resonance
• Constructed of mandrel bent stainless steel tubing
• Fits All G-Bodies Except EL Caminos – 118-inch Wheelbase

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16723 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16723 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16723 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15893 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15893 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15897 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear Behind Rear Tires exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15897 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15899 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15899 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15894 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15894 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-3110 2.5″ Stainless Steel Exhaust System 05-06 GTO Dual Exhaust
• Large diameter stainless steel mandrel-bent tube

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-3109 2.5″ Stainless Steel Exhaust System 04 GTO Dual Exhaust
• Large diameter stainless steel mandrel-bent tube