Pontiac 6000 Performance and Racing Products

Essential Pontiac 6000 Performance and Racing Products

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$46.99
Brake Bleeder Screws

Edelbrock – Performer Top Small-Block Chevy 4V Intake Manifold (Part No.3789)

Performer Top Small-Block Chevy 4V Intake Manifold

from

$216.99
Product Features:
  • Matching Top For Edelbrock Base Intake PN[3785]
  • Designed for Standard Flange 4-barrel Carburetor
  • Contains Necessary Linkage And Bracketry
  • Match With Edelbrock Valve Covers Pn[4488]
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)

Coil; GM Coil Pack; 2 Tower Style

from

$83.99
The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.

Product Features:
  • Direct performance replacement
  • For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
  • 80:1 turns ratio
  • Lower Primary Resistance Produces High Voltage Output
  • Works w/Stock Ignition As Well As MSD Ignitions
  • CARB E.O. Approved
See More

Accel – Distributor Cap And Rotor Kit (Part No.8130)

Distributor Cap And Rotor Kit

from

$32.88


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

MSD Ignition – Harness; MSD 6 to GM Dual Connector Coil (Part No.8876)

Harness; MSD 6 to GM Dual Connector Coil

from

$77.99
MSD Ignition control are easy to install, but we also offer several direct plug-in harnesses for late model vehicles! The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

Product Features:
  • Plug-In Harness w/Color Coded Wires
  • No Cutting Or Splicing
  • Quick Easy Installation
  • Provides A Direct Plug-In Installation
  • When Adding An MSD Ignition Control
See More

B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)

Torque Converter, Nitrous Holeshot 3000

from

$899.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 2800-3200 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Edelbrock – Performer-Plus Camshaft Kit for Chevy 2.8L 90 Deg V6 (Part No.3790)

Performer-Plus Camshaft Kit for Chevy 2.8L 90 Deg V6

from

$297.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2908)

Engine Crankshaft Seal Kit

from

$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1624)

Engine Valve Cover Gasket Set

from

$24.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$29.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mr. Gasket – High Performance Thermostat (Part No.4365)

High Performance Thermostat

from

$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 195 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

High Performance Thermostat - 160 Degree Brass & Copper

from

$29.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens at 160 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully opens at Correct Temperature Consistently Regardless of engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1270)

Lower Intake Manifold Gasket Set: 2 Piece Set

from

$34.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
  • No exhaust crossover openings or blocking shields
  • Embossed steel core laminate w/coating
  • Not intended for use in emission controlled vehicles.
See More

Helping You Find the Right Performance and Racing Products for Your Pontiac 6000

You love your 6000. So we’ve made it easier than ever to help you find Pontiac 6000 Performance and Racing Products in our online catalog. Our inventory holds 34 aftermarket and OEM Performance and Racing Products for your Pontiac 6000, ranging from $10.99 to $899.99.

We offer parts from 10 brands trusted to make quality Performance and Racing Products for your Pontiac 6000. Before you buy, take some time to read through customer reviews. We currently have 3,036 reviews of Pontiac 6000 Performance and Racing Products from previous customers. Some of the top rated parts include Harness; MSD 6 to GM Dual Connector Coil with 5.0 stars and Unilite Ignition Module with 5.0 stars.

Find your 6000 Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Pontiac 6000 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Pontiac 6000

Our inventory holds Performance and Racing Products for your Pontiac 6000 from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Mr. Gasket, and MSD Ignition, all of which can keep that Pontiac happy.

FAQs for Pontiac 6000 Performance and Racing Products

What are the most purchased Performance and Racing Products for the Pontiac 6000?

Out of 34 Performance and Racing Products for the Pontiac 6000, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $29.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
High Performance Thermostat - 160 Degree Brass & Copper
from $29.49
(12)
High Performance Thermostat – 160 Degree Brass & Copper
Performance Engine Coolant Thermostats
Coil; GM External HEI Coil; High Performance
from $78.99
(3)
Coil; GM External HEI Coil; High Performance
Performance Coils

What are the top-rated Pontiac 6000 Performance and Racing Products?

Top-rated Performance and Racing Products for your Pontiac 6000 based on customer reviews/ratings are:
Harness; MSD 6 to GM Dual Connector Coil
from $77.99
(3)
Harness; MSD 6 to GM Dual Connector Coil
“Great”
Unilite Ignition Module
from $92.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
GM Hei Supercoil Red/White
from $123.99
(3)
GM Hei Supercoil Red/White
“I installed this Accel Supercoil, 1st time using one, along with a full tune up and I am impressed. Installed in a 94 caddy 4.9 v8. This car has never”