Plymouth Fury III Carburetor
Your Plymouth Fury III will be happy to know that the search for the right Carburetor products you’ve been looking for is over! Advance Auto Parts has 21 different Carburetor for your vehicle, ready for shipping or in-store pick up. The best part is, our Plymouth Fury III Carburetor products start from as little as $215.99.
When it comes to your Plymouth Fury III, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Carburetor product and part brands so you can shop with complete confidence. Some of our top Carburetor product brands are Edelbrock and United Carb. We’re sure you will get the right product to keep that Fury III running for a long time.
We even have reviews of our OEM and aftermarket Carburetor products to help you buy with confidence. Hear from other customers via the 2,614 reviews on parts for your Plymouth Fury III.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Carburetor products for your Fury III, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Carburetor for a Plymouth Fury III
Use the fitment form at the top of the page to select your exact year and engine type for your Plymouth Fury III.
-
Edelbrock - Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No. 1411)
DescriptionThe Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:- Includes PCV Outlet
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
Read 3 review(s)Review snapshot ® by PowerReviews
-
Looks sweet sitting on the 23 T bucket
Looks sweet sitting on the 23 T bucket
Submitted 2014-07-10
By tommy
From Aiken SC
Shines like a new penny.... icing on the cake .... it just tops off the motor... what else can you say.
Bottom Line recommended
-
Fantastic
Fantastic
Submitted 2012-04-07
By Torino Tyler
From Cape Coral, Fl
Looks Great and Performs Great
Bottom Line recommended
-
great product
great product
Submitted 2010-12-28
By firewoodman
From canfield, OH
i put this carb on my dump truck and i couldn't be more pleased. my truck runs great and has better mpg and increased power
Bottom Line recommended
from $545.99
View Product -
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 6-6158)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.Read 1 review(s)Review snapshot ® by PowerReviews
-
"I would buy this product again !!!!!!!!
"I would buy this product again !!!!!!!!
Submitted 2009-12-04
By keithy167
From blackwood, new jersey
craftmenship is the best! very nice rebuild...
Bottom Line recommended
from $243.99
View Product -
-
Edelbrock - Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No. 1406)
DescriptionThe Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:- Includes PCV Outlet
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
Read 3 review(s)Review snapshot ® by PowerReviews
-
I will definitely be back! 🍻
I will definitely be back! 🍻
Submitted 2023-05-21
By KickFlip
From Salem, Oregon
I love the product, great performance and a awesome chrome look!
Bottom Line recommended
-
Nice updated version
Nice updated version
Submitted 2021-12-26
By Jc
From TELFORD, TN
Like the improved throttle response with this model.
Bottom Line recommended
-
Great Carburetor Right Out Of The Box!
Great Carburetor Right Out Of The Box!
Submitted 2021-10-24
By Mensanot64
From Cooper City, FL
I recently picked up a 1966 Plymouth Satellite 2Dr 440 4SP. The previous owner didn't know much about the engine build but it does have headers, an Edelbruck Performer Intake and at bare minimum, a mild but thumpy cam. It had a Edelbrock 600 CFM 1407 (Older but still good carbs) on it. It needed a rebuild for sure but 600CFM. I have run mopars most of my life. I had a 383 with a 750CFM Double Pumper on it but that engine was built to race and big block mopars love big carburetors. First thing I have to decide for my 440 is how much CFM did I need without knowing the engine build was. Using the same old formula, Cubic Inches X RPM divided by 3456 is the common formula for an almost stock engine. Chryslers redline for 440 big blocks was around 5,000 but 5400-5500 wont hurt her. Stock HP for these engines was 375HP. I am guess mines putting out around 425HP. I also used the 5000 Redline in the formula which came out to be 636 CFM so a 650CFM carb was my first simple choice until this engine gets a rebuild. Most muscle car drivers know an Edelbrock is really a set it and forget it carb and is highly recommended for the street and occasional drag race. Now, I needed to fix my carb because it looked old and didn't tune easy. It would occasional stall plus it had a mechanical choke which are a pain for a daily driver. I went for the newer AVS2 Edelbrock since they have some minor advancements plus an electric choke. I bought this off the shelf along with some new rubber fuel lines, a new fuel filter before the mechanical fuel pump and a secondary filter (clear type from Classic Industries online) that goes between the fuel pump and the carburetor. This is required by Edelbrock for warrantees. Take pictures of the old carb first as it makes the install easier. After I replaced the carb, hooked up the electric choke and ground (you have to use the old throttle cable mount or buy a new one), it started right up. The only adjustment I had to make was bump up the idle!!!!
Bottom Line recommended
from $428.99
View Product -
Holley - Street Carburetor: 770 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No. 0-80770)
DescriptionSquare flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Read 2 review(s)Review snapshot ® by PowerReviews
-
This was just what I was looking for.
This was just what I was looking for.
Submitted 2011-11-17
By John55Dale
From Sandpoint, Idaho
This was the carb that my engine builder suggested.
Bottom Line recommended
-
Great Carberator no regrets
Great Carberator no regrets
Submitted 2011-01-22
By Bill
From Wheat Ridge, CO
Part of restoration process was to replace Rochester and this was a great addition to my 71 Chevy Truck. Performance is dramatically better!! Also changed to Wyland Manifold making transition from cast iron to alluminum and matching products. One suggestion I may have is to clean engine at car wash to speed installation.
Bottom Line recommended
from $643.99
View Product -
Edelbrock - AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No. 1906)
DescriptionThe Edelbrock AVS2 Series #1906 is a satin-finished four-barrel carburetor with electric choke that is designed and calibrated for optimum street performance in engines that require an air-fuel flow of 650 CFM. The AVS2 is a perfect replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1906 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5" Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2 with electric choke, order part #19063.
Product Features:- Satin Finish
- Electric Choke
- 4 Barrel
- Annular Booster Type
- 650 cfm Maximum Flow Rating
Read 3 review(s)Review snapshot ® by PowerReviews
-
I would and will purchase another one for other projects
I would and will purchase another one for other projects
Submitted 2023-07-08
By Btw
From Fairburn ga
Easy to install little to no adjustments needed very great product
Bottom Line recommended
-
Yes
Yes
Submitted 2023-05-17
By George
From Littleton
This is my second 1 now both trucks have 1 very nice
Bottom Line recommended
-
AVS2 Carburetor
AVS2 Carburetor
Submitted 2023-04-06
By Philip
From OH
It did not come with everything necessary to install. had to go back and purchase an important part. For the cost I paid it was disappointing.
Bottom Line NULL
from $453.99
View Product -
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 6-6117)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.Read 1 review(s)Review snapshot ® by PowerReviews
-
buy this product---------yes
buy this product---------yes
Submitted 2010-07-17
By Tom
From Albrightsville, PA
installed on 68 plymouth, needed to adjust air otherwise the carb functioned well
Bottom Line recommended
from $247.99
View Product -
-
Edelbrock - Performer Carburetor #9905 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 9905)
DescriptionBurnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.Read 1 review(s)Review snapshot ® by PowerReviews
-
easy install
easy install
Submitted 2013-01-11
By '67 LTD 428
From wichita ks
works good when you have all the parts for it after putting the extra parts on i had to modify them so the tranny kickdown and throttle lever did not interfere with each other. also i no longer have over drive need to find out why and the back to barrels on the carb do not open all the way again need to figure out why. the response is still impressive and my car is drivable so it did serve its purpose for now. i would reccommend this to someone else as the carburetor itself did not need any adjustments to the fuel and air mixtures my car is now running better than before.
Bottom Line recommended
from $403.99
View Product -
-
Edelbrock - AVS2 1901 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No. 1901)
DescriptionThe Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1901 is calibrated for single-quad applications and factory equipped with: Metering Jets - Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5' Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.
Product Features:- Square Bore
- Electric Choke
- 4 Barrel Count
Read 1 review(s)Review snapshot ® by PowerReviews
-
Do not believe what you see
Do not believe what you see
Submitted 2018-10-10
By Hunt963
From Oxford MS.
Ordered this carb because the ad states it is a Q-jet carb same number even has the pic of a Q-jet but it is not. It is a AVS2 carb from edelbrock. Totally different design with fuel inlet on rear not front of carb. Wasted four days waiting on it, now back to square one. FALSE AD....
Bottom Line not recommended
from $502.99
View Product -
Edelbrock - AVS2 1905 Carburetor: 650 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No. 1905)
DescriptionThe Edelbrock AVS2 Series #1905 is a satin-finished carburetor with manual choke that is designed and calibrated for optimum street performance in engines that require 650 CFM of air-fuel flow. The AVS2 is a perfect four-barrel replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1905 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5" Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2, order part #19053.
Product Features:- Square Bore
- Manual Choke
- 4 Barrel Count
from $424.99
View Product -
Edelbrock - AVS2 1902 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No. 1902)
DescriptionThe Edelbrock #1902 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1902 is calibrated for single-quad applications and factory equipped with: Metering Jets - Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5' Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.
Product Features:- Square Bore
- Manual Choke
- 4 Barrel Count
from $443.99
View Product -
Edelbrock - Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No. 1400)
DescriptionThe Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1400 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out. Secondly, the carburetor has the unique ability to "hold a tune", so the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent, and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with today┐s commercially available gasoline, gasohol, and blended fuels (E10, not E85). The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable and user-friendly for miles and miles of trouble-free operation. The #1400 is an emissions legal part when used with 1980 and older GM V8┐s (Chevrolet, Cadillac, Buick, GMC, Pontiac, and Oldsmobile) originally equipped with non-feedback carburetors. May require the use of adapter plate #2696.
Product Features:- Includes EGR ; Fuel Vapor Outlet
- Electric Choke
- 4 Barrel
- Square Bore
- Electric Choke Installed from Factory
- Smooth Secondary Transition
from $530.99
View Product -
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 5-596)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $237.99
View Product -
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 6-6163)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $217.99
View Product -
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 6-6142)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $217.99
View Product -
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 13-1380)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $215.99
View Product -
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 6-6147)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $229.99
View Product -
Edelbrock - Performer 14053 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Inlet, Black (Part No. 14053)
DescriptionProduct Features:- The Edelbrock 14053 Performer Series 600 CFM manual choke Black Powder Coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. S
- Manual Choke, Black
- 4 Barrel Count
- Square Bore
from $492.99
View Product -
United Carb - Remanufactured Carburetor 4 Barrel (Part No. 5-5123)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $306.99
View Product -
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 5-5118)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $239.99
View Product -
United Carb - Remanufactured Carburetor 1 Barrel (Part No. 5-5126)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $235.99
View Product -
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 5-5154)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $235.99
View Product
Year Range for Plymouth Fury III
FAQs for Plymouth Fury III Carburetor Products
What are the most purchased Carburetor products for the Plymouth Fury III?
Out of 21 Carburetor products for the Plymouth Fury III, the most popular in our inventory are:What are the best aftermarket Carburetor products for the Plymouth Fury III?
See what past customers had to say about our highest-rated Carburetor products for the Plymouth Fury III: