Plymouth Cuda Parts

Please Select your Vehicle to See Exact Fit Parts

Plymouth Cuda Body Parts

from

$37.99

New Goodmark Floor Reinforcement Bracket, Passenger Side, Rear Side Rail To Inner Sill Support

Product Features:

Passenger Side Rear Side Rail To Inner Sill Support
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$66.99

New Goodmark Passenger Side Tail End Bracket Corner, Made Of Steel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$11.99

New Goodmark Window Crank, All Mopar Cars

Product Features:

All Mopar Cars
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$20.99

New Goodmark Fender Louvre Bracket, Made Of Steel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.99

New Goodmark Frame Crossmember Rear Extension, Driver Side

Product Features:

Driver Side
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$23.99

New Goodmark Frame Crossmember Rear Extension, Passenger Side

Product Features:

Passenger Side
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$10.99

New Goodmark 4 Piece Hood To Fender Bumper Kit

Product Features:

Made Of Rubber
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$36.99

New Goodmark Front Floor Support Brace, 2 Required

Product Features:

2 Required
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$124.99

New Goodmark Passenger Side Lower Quarter Panel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$123.99

New Goodmark Driver Side Lower Quarter Panel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$74.99

New Goodmark Trunk Floor Brace, Use 2 Per Car

Product Features:

Use 2 Per Car
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$36.99

New Goodmark Trunk Floor Brace, Rear Passenger Side, Center Floor Gusset Support

Product Features:

Rear Passenger Side Center Floor Gusset Support
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$36.99

New Goodmark Trunk Floor Brace, Rear Driver Side, Center Floor Gusset Support

Product Features:

Rear Driver Side Center Floor Gusset Support
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$128.99

New Goodmark Trunk Lock Striker Support

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$179.99

New Goodmark Driver Side Hood Hinge Assembly

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$25.99

New Goodmark Passenger Side Inner Quarter Brace To Floor, Made Of Steel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$60.99

New Goodmark Driver Side Brace Inner Fender To Firewall, Made Of Steel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$65.99

New Goodmark Driver Side Inner Fender Gusset To Shock Tower, Made Of Steel

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$72.99

New Goodmark Driver Side Fender Brace, Fender To Cowl

Product Features:

Fender To Cowl
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$72.99

New Goodmark Passenger Side Fender Brace, Fender To Cowl

Product Features:

Fender To Cowl
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Plymouth Cuda Transmission Parts

from

$10.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$48.99

Product Features:

Durable polyurethane to handle the stress of high horsepower
Same durometer as other BlackHeart and Hooker poly mounts
Can be used in place of 1-bolt or 2-bolt mount
Absorbs vibration and last longer than rubber
Ideal for use on street or strip applications
Molded indentions for socket clearance to ease installation
Complete with Grade 8 mounting hardware
Bolt Spacing on the Wider Side: 4-inch
Bolt Spacing on the Narrow Side: 1.5-inch

from

$25.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$9.79

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$10.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$11.99

Manufactured with premium materials, National needle bearings are designed and engineered to meet OE specifications.

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$4.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$3.99

Product Features:

Brand may vary by location

from

$9.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$1075.99

Converter: Tf-904 Non L/U 28-3200 Stall

from

$24.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$10.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$85.99

This B&M Shift Improver kit fits all 1966-1970 Chrysler, Dodge and Plymouth TF727 transmissions with 6 cyl and V8 engines, along with 1966-1977 A-904 transmissions with 6 cyl engines and 1968-1970 A-904 transmissions with V8 engines. This kit recalibrates your automatic transmission for optimum performance, extended life by eliminating shift overlap and excess wear on clutches & bands due to slippage. You get two modes of performance to select from: Stage 1 Heavy Duty, or Stage 2 Street/Strip. Stage 1 gives firm positive shifts without loss of driver comfort for improved shifting performance in all street vehicles. Street/Strip is for high performance street use or for competitive events for the enthusiast who wants the hardest hitting, quickest possible shifts. All you need are basic tools, the included installation instructions and in the space of an afternoon you can turn your transmission into a B&M-tuned unit! Ask the thousands of satisfied customers that have installed one in their transmissions!

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$349.99

Our Hi-Tek deep transmission pans are constructed from A356-T6 aluminum and are cast with thick internal and external fins, adding additional strength and increased cooling properties. The deep pan design increases fluid capacity by 4 quarts over the stock O.E. steel pan. All these features combined help dissipate heat quicker netting lower transmission and fluid temperatures prolonging the life of your transmission, transmission fluid and corresponding components. Other features for this popular pan include a filter, filter extension, gasket and drain port with magnetic drain plug for clean and easy servicing. Also includes a 1/8 inch NPT temperature sensor port for easily adding a temp gauge for monitoring transmission temperatures while daily driving, towing or racing. Includes detailed instructions with all necessary hardware for an easy at home installation. Note: Does not increase fluid capacity for the 48RE transmission.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$8.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$35.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$52.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$223.99

AT MSTR REP KIT PLUS

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$44.99

AUTO TRANS BAND

Plymouth Cuda Clutch Systems

from

$1349.99

Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.

Product Features:

Hydroformed From Premium Quality Steel
Uniform Thickness For Superior Strength
Mig-Welded Threaded Inserts
Stress Relief In A Stronger/Safer Bellhousing
Precision Machined Assures Proper Bolt Hole
Includes Block Plate And Hardware
Approved By Major Racing Sanctioning Bodies
Meets SFI 6.1 Specifications

from

$49.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$173.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1962-up TF727 transmissions and all internally balanced Chrysler, Dodge and Plymouth V8 engines with 6-bolt crankshaft flange. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.00 or 11.125 inch converter mounting locations and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$182.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1962-up A727, A904 transmissions and all internally balanced Chrysler, Dodge and Plymouth V8 engines with 8-bolt crankshaft flange. Features include high tensile strength steel construction to resist elongation and cracking, 10.00 inch bolt pattern and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$37.49

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$15.49

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$23.99

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$46.99

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Manufactured to meet or exceed original equipment specs
Eliminates grinding from damaged teeth
Increases starter drive life

from

$33.49

Manufactured to meet or exceed original equipment specs
Eliminates grinding from damaged teeth
Increases starter drive life

from

$36.99

Manufactured to meet or exceed original equipment specs
Eliminates grinding from damaged teeth
Increases starter drive life

from

$1126.99

Hays650 Cltch 60-75 Chry V8:10.5In:23Spl

from

$716.99

High burst strength woven lining to withstand heat and higher engine RPM. Heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter. Recommended for high horsepower street vehicles in addition to occasional drag strip use.

Product Features:

Built As Matched Assembly
Exceptional Performance
Exceptional Durability
Long Term Dependability

from

$1349.99

Hays650 Cltch 70-2 Chry Bb:10.95:18Spl

from

$665.99

Hays450 Cltch 60-75 Chry V8:10.5:23Spl

from

$665.99

Hays450 Cltch 66-85 Chry V8:11In:23Spl

from

$29.99

FLYWHEEL SHIM

from

$24.49

FLYWHEEL SHIM

Plymouth Cuda Automotive Accessories

from

$159.99

Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

from

$99.99

The Budge Rain Barrier car cover offers easy to use, 100% waterproof indoor and outdoor protection. This vehicle cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof car covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a tan color. Includes a storage bag and antenna patch. Our car covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H.
This waterproof car cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
This car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
This vehicle cover features ultrasonically welded seams for extra durability
Elasticized hem and sewn-in grommets hold your car cover in place in windy-conditions

from

$159.99

This car cover fits cars 200″ L x 60″ W x 51″ H
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

from

$45.99

The Budge Basic car cover offers single layer, basic protection against dust and debris – at a budget friendly price. Lightweight and easy to use, this vehicle cover is perfect for indoor use or occasional outdoor protection. The Budge Basic car cover is constructed from a single layer of polypropylene. This material is fully breathable to prevent mold and mildew. This cover is nonabrasive and will not harm your vehicle’s exterior. Our Budge Basic car covers are light gray in color. This is a suitable indoor and short term outdoor cover for your car. Our covers are available in a variety of sizes that will popular car makes and models. Cover includes a storage bag and antenna patch.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This car cover is suitable for indoor and short term outdoor storage
This vehicle cover features double stitched seams for added durability
A full elastic hem helps keep the car cover securely on your vehicle
Will defend against dust, dirt, bird droppings, tree sap and more

from

$99.99

The Premium Car Cover is our one of kind 3-layer cover. Made from 3 durable layers, this cover provides unparalleled waterproof protection for your vehicle. The Budge Premium car cover combines multiple layers of exceptionally waterproof polypropylene with an interior waterproof membrane while the inner most layer of the cover is comprised of a nonabrasive fleece-like material. This cover is also UV treated to protect against harsh sun exposure.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
Material has a soft inner lining that will not scratch the surface of your vehicle
Built-in strap and buckle system keeps cover secure
This car cover is made from 3 durable layers that will keep your vehicle protected
Full elastic hem creates a comfortable fit

from

$69.99

The Ultra car cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our duor car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
This car cover is water resistant and features ultrasonically welded seams for extra durability
Cover is suitable for short term outdoor protection and long-term indoor protection
This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

from

$59.99

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive
Backed By A Limited Lifetime Warranty

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For A Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$59.99

The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
Prevents The Rain From Entering The Sunroof Opening While Driving
Helps Reduce Heat Buildup Inside The Vehicle
Available In 5 Different Sizes For Perfect Fit
No Drill Installation
Installs Quickly And Easily With 3M Automotive-Grade Adhesive

from

$35.99

The offset cam and crankshaft key helps increase torque and horsepower.

Product Features:

Increases Low-End Torque
Increases Mid-Range Horsepower
Reduces Low-End Torque
Increases Top-End Horsepower

from

$38.99

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

Saves wear and tear on your engine
Simple installation directly into engine block

from

$83.99

KATS was created and developed as a truly effective product for cold weather and hard starting problems. Owners and operators of diesel and gas operated equipment have long known that delayed starts and slow starts mean big money losses in labor, maintenance and operating revenue. KATS Circulation Tank Heaters are designed to do one thing – Start engines FAST! KATS Circulation Tank Heaters are truly superior heavy duty patented products. This heater is thermostatically controlled 135-175 degrees. Our components are 100% made in the USA. Customers will find KATS Circulation Tank Heaters are unbeatable in pricing, quality and performance anywhere. KAT’S manufacturing quality control procedures assure you the very best anytime you install and operate a KAT’s system.

Product Features:

Available for all size engines
Equipped with check valve
Fits most liquid cooled engines
Installations easier and simpler
New lower radiator hose connectors

from

$56.99

Lower Radiator Hose Heater

Plymouth Cuda Interior Products

from

$13.49

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit And function just like the original part to ensure durability And long life.

Product Features:

Includes Cable Lube
Plastic sheath protects cable from debris and water
Comes ready to install

from

$20.29

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes Cable Lube
Plastic sheath protects cable from debris and water
Comes ready to install

from

$54.99

Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:

Use To Install All Classic, Challenger Or Signature Series Wheels
Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
ISO/ TS Certified
Designed To Mount Our Wheel To Your Rig
Use with all Grant Classic/Challenger/Signature Steering Wheels

from

$13.99

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 83″.

Product Features:

Easy to install
Will fit many custom applications
Low cost alternative

from

$9.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$54.99

Accelerator cables connect the foot pedal to either the carburetor or EFI assembly. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP accelerator cables are designed to fit And function just like the original part to ensure durability And long life.

Product Features:

Includes brackets, grommets, etc to match original
Fit and function like the original parts
Restores normal operation

from

$5.99

New Goodmark Pair Of Glove Box Door Bumpers

Product Features:

Pair
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Looking for the best Plymouth Cuda aftermarket replacement parts? Replacing worn and broken parts on your Plymouth Cuda? Check out our online catalog to find the best selection of aftermarket Plymouth Cuda parts as well as real user reviews on Plymouth Cuda replacement parts. Make an informed decision about every component you add to your Cuda.

At Advance Auto, we’ve got you covered when it comes to getting your Plymouth Cuda in tip top condition. We’ve got over 1,714 Plymouth Cuda parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Plymouth Cuda parts catalog to compare OEM and aftermarket parts for your Plymouth Cuda.

Whether you need Plymouth Cuda body parts, interior components, or custom Plymouth Cuda parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Plymouth Interior Products same day? No problem, you can pick up Cuda parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Plymouth Cuda parts has never been easier.

Advance Auto customers frequently search for the following types of Plymouth Cuda auto parts. Check out customer reviews and ratings, and compare prices on the following Plymouth Cuda parts:

People also search Advance Auto for these popular years of the Plymouth Cuda:

Plymouth Cuda Parts

KAI – Floor Reinforcement (Part No.GMK2120773701R)

KAI – Trunk Floor Support (Part No.GMK2422850702R)

KAI – Window Crank Handle (Part No.GMK211142168)

KAI – Fender Emblem (Part No.GMK2422130712)

KAI – Frame Crossmember (Part No.GMK2120790702L)

KAI – Frame Crossmember (Part No.GMK2120790702R)

KAI – Hood Stop Buffer (Part No.GMK2422206701S)

KAI – Floor Brace (Part No.GMK2120517702)

KAI – Quarter Panel (Part No.GMK242269072R)

KAI – Quarter Panel (Part No.GMK242269072L)

KAI – Trunk Floor Brace (Part No.GMK212074570)

KAI – Trunk Floor Brace (Part No.GMK2120773703R)

KAI – Trunk Floor Brace (Part No.GMK2120773703L)

KAI – Deck Lid Striker Bracket (Part No.GMK2422721704)

KAI – Hood Hinge (Part No.GMK212021071L)

KAI – Quarter Panel Brace (Part No.GMK2120604704R)

KAI – Fender Brace (Part No.GMK212035270L)

KAI – Fender Brace (Part No.GMK2130325625L)

KAI – Fender Brace (Part No.GMK2120120701L)

KAI – Fender Brace (Part No.GMK2120120701R)

National – Multi-Purpose Seal (Part No.8935S)

Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Black (Part No.71223029HKR)

National – Tapered Roller Bearing Cone (Part No.M802048)

Schaeffler – Bearing – TRB (Tapered Roller Bearing) (Part No.KT2)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Driveworks – Oil Seal (Part No.S-331228H)

National – Multi-Purpose Bearing (Part No.FA-35688)

National – Bearing Race (Part No.LM67010)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-8609)

National – Multi Purpose Seal (Part No.8609)

Hays – Converter: Tf-904 Non L/U 28-3200 Stall (Part No.97-3B28Q)

Schaeffler – Cone (Part No.KM86649)

Driveworks – Oil Seal (Part No.S-7300S)

B & M – Shift Improver Kit (Part No.10226)

B & M – Transmission Cast Deep Pan, Brushed Finish TF727/ 518&618/48RE Cummins (Part No.10280)

National – Multi-Purpose Bearing (Part No.A-1)

National – Multi-Purpose Bearing (Part No.A-35)

Felpro – Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (Part No.TOS 18667)

Felpro – Manual Transmission Gasket Set (Part No.TS 13381-5)

ATP – AT MSTR REP KIT PLUS (Part No.TMS-14)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.241018)

ATP – AUTO TRANS BAND (Part No.TX-47)

Lakewood – Bellhsng: Dodge Truck 383-440 (Part No.15335)

National – Clutch Release Bearing (Part No.614036)

B & M – Flexplate, 6 Bolt Crank for TF 727 (Part No.10230)

B & M – Chrysler SFI Flexplate – 62 & Later Internally Balanced 8-Bolt Crank – A727 A904 (Part No.10231)

ATP – Automatic Transmission Flex Plate (Part No.Z-439)

ATP – Automatic Transmission Flex Plate (Part No.Z-196)

ATP – Automatic Transmission Flex Plate (Part No.Z-197)

ATP – Flywheel Ring Gear (Part No.ZA-510)

ATP – Flywheel Ring Gear (Part No.ZA-505)

ATP – Flywheel Ring Gear (Part No.ZA-507)

Hays – Hays650 Cltch 60-75 Chry V8:10.5In:23Spl (Part No.92-3011)

Hays – Comp/Trk Clutch Kit-1O.5 Chry (Part No.85-301)

Hays – Hays650 Cltch 70-2 Chry Bb:10.95:18Spl (Part No.92-3001)

Hays – Hays450 Cltch 60-75 Chry V8:10.5:23Spl (Part No.91-3004)

Hays – Hays450 Cltch 66-85 Chry V8:11In:23Spl (Part No.91-3006)

ATP – FLYWHEEL SHIM (Part No.TS-5)

ATP – FLYWHEEL SHIM (Part No.TS-4)

Budge – Indoor Stretch Car Cover, Red Size 3: Fits Up To 16’8" L, Soft Inner Lining (Part No.RSC-3)

Budge – Rain Barrier Car Cover, Grey Size 3: Fits Cars up to 200 in. L, Outdoor Protection (Part No.RSD-3)

Budge – Indoor Stretch Car Cover, Black, Size 3: Fits Up To 16’8" L, Soft Inner Lining (Part No.BSC-3)

Budge – Budge Basic Car Cover, Gray, Size 3: Fits up to 16’8" L, Scratch Resistant, Breathable, Dustproof (Part No.B-3)

Budge – Budge Premium Car Cover, 3 Layer Moderate Weather Protection for Cars, Fits Cars up to 16′ 8" (Part No.3LF3)

Budge – Ultra Car Cover, Gray, Size 3: Fits up to 16’8" L, 3 Layers, Water Resistant, Scratchproof, Dustproof (Part No.D-3)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 41.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77005)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 33.0" Wide Sunroofs, Smoke, Outside Mount, 1 Pice (Part No.77001)

Auto Ventshade (AVS) – Windflector – Pop-Out, Window, Fits Up To 36.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.78062)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 35.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77003)

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 38.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77004)

Mr. Gasket – Woodruff Key (Part No.987G)

Kat’s – Freeze Plug Heater (Part No.11612)

Kat’s – Circulation Tank Heater; Thermostatically Controlled (Part No.13150)

Kat’s – Lower Radiator Hose Heater (Part No.16600)

ATP – ATP Speedometer Cable (Part No.Y-804)

ATP – Speedometer Cable (Part No.Y-881)

Grant – Use All Grant Classic/Challenger/Signature Steering Wheels, Matte, Black, Alum (Part No.3314)