Omega Omega Engine Parts

Please Select your Vehicle to See Exact Fit Parts

Essential Omega Omega Engine Parts

Edelbrock – Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8 (Part No.7122)

Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8

from

$450.99


Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45008)

Engine Timing Cover Gasket Set

from

$26.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Edelbrock – Rollin’ Thunder Camshaft for Ford 5.0L V8 (Part No.3722)

Rollin' Thunder Camshaft for Ford 5.0L V8

from

$534.99
Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9333 PT-1)

PermaTorque Engine Cylinder Head Gasket

from

$35.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:
  • Manufactured for the repair environment
  • Unsurpassed quality you can trust
  • Unsurpassed quality you can trust
See More

Felpro – Engine Oil Pump Pickup Tube Gasket (Part No.72516)

Engine Oil Pump Pickup Tube Gasket

from

$3.29
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Valve Seat For S/B Chevy Heads With 1.60" Valves (Part No.9711)

Valve Seat For S/B Chevy Heads With 1.60" Valves

from

$81.99
The Edelbrock No. 9711 Intake Valve Seat set is a replacement for Edelbrock cylinder heads.
See More

Edelbrock – Small-Block Ford E-Street Cylinder Heads 2.02" (Part No.5025)

Small-Block Ford E-Street Cylinder Heads 2.02"

from

$1332.99
The Edelbrock #5025 E-Street cylinder heads are designed for Ford 289-351 W V8 applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and are designed for e

Product Features:
  • Complete Pair
  • 60cc Combustion Chamber Volume
  • 170cc Intake/60cc Exhaust Runner Volume
  • 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
  • 0.625 in. Deck Thickness
See More

Felpro – VALVE COVER GASKET SET (Part No.VS 50029 C)

VALVE COVER GASKET SET

from

$26.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
  • SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

MAHLE Original – Fuel Pump Gasket (Part No.D27094)

Fuel Pump Gasket

from

$1.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – Engine Conversion Gasket Set (Part No.CS 8548-4)

Engine Conversion Gasket Set

from

$32.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:
  • Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
  • Includes all the parts necessary to complete the repair unless otherwise noted
  • Includes all the parts necessary to complete the repair unless otherwise noted
See More

Felpro – Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included (Part No.OS 13260 T)

Engine Oil Pan Gasket Set - PermaDryPlus rigid carrier, Oil Pan SnapUps Included

from

$52.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
  • SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Edelbrock – Sure Seat Valve Springs (Part No.5825)

Sure Seat Valve Springs

from

$155.99
The Edelbrock #5825 Replacement Sure Seat Valve Spring for Edelbrock #5085, 60759, 60909, 60719, 60739, 60999, 60899 & 79899 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Product Features:
  • Non-Rotator Type
  • 1.460 in. Outer Diameter
  • Made In The USA
  • Single Coil Spring Type
  • Set of 16
See More

Edelbrock – Sure Seat Valve Springs (Part No.5845)

Sure Seat Valve Springs

from

$159.99
The Edelbrock #5845 Replacement Hydraulic Roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Product Features:
  • Non-Rotator Type
  • 1.460 in. Outer Diameter
  • 1.060 in. Inner Diameter
  • 1.060 in. Coil Blind
  • Set of 16
See More

Competition Cams – Super Valve Locks, 11/32" 1 St (Part No.611-16)

Super Valve Locks, 11/32" 1 St

from

$479.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:
  • For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
  • Super Locks are recommended in all race applications
See More

Edelbrock – Ford Head Stud Kit 1949-53 (Part No.8502)

Ford Head Stud Kit 1949-53

from

$437.99
The Edelbrock No. 8502 bolt kit contain a complete set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate the need for valve train removal to facilitate cylinder head re-torqueing. Hardened and parallel-ground washers are included.
See More

Victor Reinz – Engine Crankshaft Seal Kit (Part No.19-10156-01)

Engine Crankshaft Seal Kit

from

$21.99
Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Dana engineering-approved for fit, form and function
  • Meets or exceeds OE specifications
See More

Competition Cams – HYDRAULIC LIFTER SET, SBFORD 1 ST (Part No.832-16)

HYDRAULIC LIFTER SET, SBFORD 1 ST

from

$120.99
High Energy Hydraulic lifters have a patented constant orifice metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and pushrod seat is maintained, eliminating excessive oiling at high engine speeds. The pushrod seat is made of a special powdered metal iron alloy that is heat-treated for strength and wear resistance.In addition, High Energy Lifters have a lightweight check valve disc that allows for quicker response, which results in increased engine speed before valve float. This check valve disc also maintains added control at all engine speeds and loads.COMP Cams High Energy Hydraulic Lifters also contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity.

Product Features:
  • .875″ diameter; 105g weight; 2.05″ seat height
  • Patented orifice metering valve precisely meters oil to the rocker arms
  • Continuous contact between metering valve and hardened pushrod seat is maintained, eliminating excessive oiling at high engine speeds
  • Contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity
  • Lightweight check valve disc allows for quicker response and maintains added control at all engine speeds and loads
See More

Felpro – Engine Crankshaft Seal Kit (Part No.BS 30136)

Engine Crankshaft Seal Kit

from

$18.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Competition Cams – PUSHROD SET, SBF HIGH ENERGY 1 ST (Part No.7831-16)

PUSHROD SET, SBF HIGH ENERGY 1 ST

from

$66.99
High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RVs and daily drivers. High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy and Magnum Rocker Arms.

Product Features:
  • 5/16″ diameter, 6.881″ length for Small Block Ford 255 and 302, ’65-up with Flat Tappet Cam
  • Best choice when building street rods, RVs or daily drivers
  • Meet or exceed all OE pushrod specifications
  • Mate perfectly with High Energy and Magnum Rockers
  • Durable one-piece construction
See More

Helping You Find the Right Engine Parts for Your Omega Omega

You love your Omega. So we’ve made it easier than ever to help you find Omega Omega Engine Parts in our online catalog. Our inventory holds 54 aftermarket and OEM Engine Parts for your Omega Omega, ranging from $1.99 to $1,838.99.

We offer parts from 5 brands trusted to make quality Engine Parts for your Omega Omega. Before you buy, take some time to read through customer reviews. We currently have 234 reviews of Omega Omega Engine Parts from previous customers. Some of the top rated parts include Engine Valve Cover Gasket Set with 2.0 stars and Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8 with 5.0 stars.

Find your Omega Engine Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Omega Omega part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Engine Parts Brands for Your Omega Omega

Our inventory holds Engine Parts for your Omega Omega from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like Felpro, Competition Cams, and Edelbrock, all of which can keep that Omega happy.

Top-Rated Felpro Engine Parts

Leading Felpro Engine Parts

We carry Felpro brand parts for your Omega Omega across several catalog categories, including Engine Gaskets and Seals. Some of our most reviewed Felpro parts include:
VALVE COVER GASKET SET
from $26.99
(20)
VALVE COVER GASKET SET
Valve Cover Gaskets

FAQs for Omega Omega Engine Parts

What are the most purchased Engine Parts for the Omega Omega?

Out of 54 Engine Parts for the Omega Omega, the most popular in our inventory are:
PermaTorque Engine Cylinder Head Gasket
from $35.99
(2)
PermaTorque Engine Cylinder Head Gasket
Cylinder Head Gaskets
PermaTorque Engine Cylinder Head Gasket
from $35.99
(4)
PermaTorque Engine Cylinder Head Gasket
Cylinder Head Gaskets
Engine Oil Pump Pickup Tube Gasket
from $3.29
(1)
Engine Oil Pump Pickup Tube Gasket
Engine Oil Pump Cover Gaskets

What are the top-rated Omega Omega Engine Parts?

Top-rated Engine Parts for your Omega Omega based on customer reviews/ratings are:
Engine Valve Cover Gasket Set
from $24.99
(2)
Engine Valve Cover Gasket Set
“Notches on sides didn’t fit”
Engine Crankshaft Seal Kit
from $18.99
(1)
Engine Crankshaft Seal Kit
“not so easy to install you need to know what you are doing take time to do is not a quick fix”