Oldsmobile Silhouette Steering and Chassis Parts
Top Oldsmobile Silhouette Steering and Chassis Parts Categories
We carry over 136 Steering and Chassis Parts in inventory for the Oldsmobile Silhouette. If you’re looking for aftermarket Steering and Chassis Parts for your Oldsmobile Silhouette, check out all these categories:
Essential Oldsmobile Silhouette Steering and Chassis Parts
Rare Parts – Sway Bar Link Kit (Part No.RP22189)
from
$25.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Lares – Remanufactured Power Steering Pump (Part No.2757)
from
$98.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Lasts Longer
- Looks Great
Driveworks – Camber Bolt Kit (Part No.DW-K90476)
from
$9.99
Camber Bolt Kit
Rare Parts – R & P Mounting Bushing (Part No.RP17218)
from
$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Insulates Rack & Pinion from Frame.
- Stabilizes Rack & Pinion
Powercraft – Pump Seal Kit (Part No.8554)
from
$21.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Front Suspension Stabilizer Bar Kit (Part No.K170001)
from
$235.99
MOOG solid sway bar kits, complete with sway bar links and bushings with synthetic fabric liner (where applicable), are made of solid, forged steel for improved durability over hollow designs, reducing the likelihood of breakage due to rusted welds.
Product Features:
See More
Product Features:
- COMPLETE SOLUTION — Includes MOOG solid sway bar, Problem Solver® sway bar link kit and synthetic fabric-lined bushings (where applicable)
- STRUCTURAL STRENGTH — Solid forged steel construction resists breaking and offers improved strength and long life over hollow OE sway bar
- CORROSION PROTECTION — Durable black E-coating inhibits premature deterioration
- EASY TO INSTALL — Precision tolerances for easy installation giving you a perfect fit right out of the box
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – Steering Tie Rod End (Part No.DW-EV260)
from
$44.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" Beaded Tube (Part No.37096)
from
$89.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Powercraft – Pump Drive Shaft Seal Kit (Part No.8712)
from
$11.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Subframe Mount Kit (Part No.924-045)
from
$79.99
This suspension subframe bushing kit is designed to match the original hardware required to repair the subframe to restore ride control on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this suspension subframe bushing kit is designed to match the original hardware required to repair the subframe to restore ride control on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Power Steering Caps (Part No.82589)
from
$19.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
MOOG – Alignment Camber Kit (Part No.K928)
from
$24.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.36737)
from
$39.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
National – Multi-Purpose Seal (Part No.7013S)
from
$22.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Cardone Service Plus – Rack and Pinion Hydraulic Transfer Tubing Assembly (Part No.3L-1106)
from
$34.99
CARDONE Rack and Pinion Transfer Tubing Assembly Kits include new components designed to meet OEM performance for form, fit, and function. All components necessary to complete the job are included to ensure your vehicle runs smoothly.
Product Features:
See More
Product Features:
- 100% new tubing and connectors to ensure long lasting performance
- New seals are provided where applicable
- All components are included to ensure your vehicle runs smoothly
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Dorman – Suspension Stabilizer Bar (OE Fix) (Part No.927-100)
from
$153.99
The original equipment tubular steel stabilizer bar on specific vehicles fails when moisture and road salt cause corrosion at the bushings. This Dorman OE FIX stabilizer bar is made from solid forged steel for exceptional strength and durability.
Product Features:
See More
Product Features:
- Improved design – this suspension stabilizer bar has been redesigned for greater durability than the failure-prone original equipment part
- Upgraded materials – this stabilizer bar is made from solid forged steel to resist failure caused by weakness in the original part’s hollow tube construction
- Compete solution – new bushings and installation hardware are included with the stabilizer bar for a complete repair
- Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
- Dorman-improved with high quality materials and a strong finish to resist corrosion in center or at ends of bar
MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)
from
$438.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Dorman – Help – Power Steering Cap (Part No.82574)
from
$13.49
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
Dorman – Power Steering Pump Pulley (Part No.300-201)
from
$55.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Ball Joint (Part No.DW-K6429)
from
$38.49
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot provides extended temperature range and better wear resistance
- Test-proven stud material helps prevent premature stud failure
- Provides premium gauge steel construction for strength and durability
- Performance tested to ensure durability
Powercraft – Upper Pinion Bearing Kit (Part No.8571)
from
$34.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES2111RL)
from
$39.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
MOOG – Alignment Shim (Part No.K100143)
from
$24.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Oldsmobile Silhouette Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Oldsmobile Silhouette
You love your Silhouette. So we’ve made it easier than ever to help you find Oldsmobile Silhouette Steering and Chassis Parts in our online catalog. Our inventory holds 136 aftermarket and OEM Steering and Chassis Parts for your Oldsmobile Silhouette, ranging from $3.29 to $549.99.
We offer parts from 15 brands trusted to make quality Steering and Chassis Parts for your Oldsmobile Silhouette. Before you buy, take some time to read through customer reviews. We currently have 5,858 reviews of Oldsmobile Silhouette Steering and Chassis Parts from previous customers. Some of the top rated parts include Power Steering Oil Cooler with 3.7 stars and New Power Steering Filter with 3.8 stars.
Find your Silhouette Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Oldsmobile Silhouette part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Oldsmobile Silhouette
Our inventory holds Steering and Chassis Parts for your Oldsmobile Silhouette from 15 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, DriveWorks, and Cardone, all of which can keep that Oldsmobile happy.
We have Carquest Premium parts available for your Oldsmobile Silhouette in categories like Power Steering Parts. Some of the top-rated Carquest Premium parts in these categories are:
from
$89.99
(17)
Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" Beaded Tube
Power Steering Return Hoses
from
$143.99
(5)
Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" Beaded Tube
Power Steering Return Hoses
Top-Rated Dorman Steering and Chassis Parts
Leading Dorman Steering and Chassis Parts
We carry Dorman brand parts for your Oldsmobile Silhouette across several catalog categories, including Steering Bars and Power Steering Parts. Some of our most reviewed Dorman parts include:
FAQs for Oldsmobile Silhouette Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Oldsmobile Silhouette?
Out of 136 Steering and Chassis Parts for the Oldsmobile Silhouette, the most popular in our inventory are:
What are the top-rated Oldsmobile Silhouette Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Oldsmobile Silhouette based on customer reviews/ratings are:
