Name: Starter Solenoid
Brand: Carquest Premium
SKU: SBC2174
Price: 45.99 USD

from

$45.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$19.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$13.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$2.49

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$185.99

Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.

Product Features:

Premium 100% New Starter
Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life

from

$189.99

Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
All new components are utilized to ensure long service life
Internal electronics are upgraded for heavy duty reliability (where applicable)
Armatures and commutators are 100% load tested
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$48.99

CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.

Product Features:

CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.

from

$31.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$20.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$5.79

This starter bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this starter bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$27.99

The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$24.99

This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.

Product Features:

Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$30.49

LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:

Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
Constructed from high-grade materials to ensure durability and longevity
Undergoes 100% testing for proper fit, form, and function
As a global manufacturer, we maintain complete quality control throughout the manufacturing process

from

$7.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$311.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$65.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$68.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$135.99

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Regulators and rectifiers are 100% electronically load tested for reliable charging performance
100% new OE-quality brushes and bearings are used to ensure long service life
Rotors and stators are load tested and double insulated for maximum charging performance
Slip rings are precision polished for maximum brush contact and service life
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$152.99

Alternator: New, 105 Amps by WAI delivers exceptional performance and reliability, engineered to meet or exceed OEM specifications for a seamless fit and hassle-free installation. Designed with advanced voltage regulator protection, it safeguards against transient voltage spikes, preventing potential battery damage while ensuring efficient communication with the ECU. Its low saturation voltage minimizes heat dissipation, enhancing durability and operational efficiency. The high-power rectifier assembly features robust open junction press-fit diodes, keeping the unit cool even under demanding conditions. Each alternator comes with a printed copy of test results, providing transparency and confidence in its performance from the moment it powers on. With WAI’s commitment to superior quality, this alternator is a dependable choice for maintaining your vehicle’s electrical system.

Product Features:

Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Designed for enhanced durability and operational efficiency, the alternator’s advanced construction minimizes heat dissipation, ensuring reliable performance even under demanding conditions.

from

$225.99

This 125-amp alternator from WAI is a top-tier choice for reliable performance and durability. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation, making it an ideal replacement for your vehicle. The advanced voltage regulator protection guards against transient voltage spikes, preventing potential battery damage while maintaining efficient communication with the ECU. Its low saturation voltage minimizes heat dissipation, enhancing overall efficiency. The high-power rectifier assembly, equipped with robust open junction press-fit diodes, is designed to keep the unit running cool under demanding conditions. Each unit is rigorously tested, and a printed copy of the test results is included, giving you confidence in its performance from the moment it powers on. With WAI’s commitment to quality, this alternator delivers exceptional value and dependable operation for your vehicle’s electrical system.

Product Features:

Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Rigorously tested for durability and reliability, ensuring consistent performance under demanding conditions.

from

$321.47

ACDelco’s Professional Remanufactured Alternators are the ideal high quality replacement for many vehicles on the road today. ACDelco’s Professional Remanufactured Alternators use high-quality bearings with high-temp lube and double-lipped rubber seals. Rotors and stators are electronically tested and then sealed with secondary insulating coating. Remanufacturing alternators is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. These premium aftermarket reman alternators are manufactured to fit a wide range of vehicles and will provide the same performance, durability, and service life you expect from ACDelco.

Product Features:

Product Features:

Remanufactured using consistent quality processes; not just rebuilt
Alternators use high-quality bearings with high-temp lube and double-lipped rubber seals, reducing friction, vibration, and noise
Rotors and stators are electronically tested and then sealed with secondary insulating coating to help prevent shorts
All units are 100% performance tested and inspected to ensure they meet ACDelco quality design and component specifications
Remanufactured alternators contribute to environmental sustainability by reusing components, reducing waste, and minimizing the need for new raw materials.

from

$1.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features: