from

$258.99

Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:

Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA

from

$119.99

SuspAirBag/Bellows

from

$39.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$23.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$137.99

Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

MAINTAIN RIDE HEIGHT UNDER LOAD – Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
EASY TO ADJUST – Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING – Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST – Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.
Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)

from

$74.99

Gas Shock Kit

from

$10.99

Corroded, stripped or broken control arm bolt making suspension repair difficult. This new control arm bolt matches the fit and function of the original bolt, its hardened steel construction allowing for secure installation of the control arm.

Product Features:

Ideal replacement – this control arm bolt is a direct replacement for a corroded, stripped or broken original equipment control arm bolt
Durable construction – made of hardened steel to match the function and durability of the original part
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone material testing and validation to ensure proper fit and long service life

from

$24.99

This suspension control arm bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$159.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
OE replacement
Reduces vibration
Reduces tire wear

from

$13.99

This leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this leaf spring insulator is designed to match the fit and function of the original insulator on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.99

SHACKLE BUSHING

from

$64.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8-inch (15.9 mm) diameter piston rod (On most applications)

from

$25.99

Monroe is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

from

$69.99

Shock Kit

from

$116.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$215.99

Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:

REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
5/8 nitrocarburized rod for long service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Upper Mount Type: Cross Pin Mount – Closed Ended, 5/16″ Hole ID (Both Ends) X 2.7/8″ Pin Length (Hole Center to Center)

from

$17.79

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$42.49

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$24.99

Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$1043.00

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
Provides An Instant Air Source For The Air Helper Springs Or Accessories
Dual Point Fill (Both Air Springs Fill Independently Of Each Other)

from

$362.99

Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.

Product Features:

CONVERT YOUR RIDE – A cost effective alternative to replacing the OE system, this conversion kit converts a factory air suspension to a conventional suspension
COMPLETE SOLUTION – Includes premium-quality replacement components – application-tuned shock/strut, coil spring(s) and necessary mounting hardware
RESTORES OE SETTINGS – Restores factory ride height (where applicable) and delivers a stable, comfortable ride
EASY TO INSTALL – Engineered for superior fit and comes with detailed instructions for a complete and trouble-free bolt-on installation
KEEPS AIR SUSPENSION LIGHT OFF – A complete solution to keep the air suspension light off

from

$158.99

This suspension ride height sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this suspension ride height sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$213.99

Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$131.99

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
Broad coverage for foreign and domestic applications

from

$12.29

Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features: