Oldsmobile 442 Steering and Chassis Parts

Essential Oldsmobile 442 Steering and Chassis Parts

Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K5254)

SWAY BAR LINK KIT 1 EA DRIVE

from

$18.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
  • Wrench flats at the base of the stud allow for the use of sockets for easy installation
See More

Driveworks – Taper Bearing Set (Part No.S-A-2)

Taper Bearing Set

from

$8.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Lares – New Steering Coupling Assembly (Part No.201)

New Steering Coupling Assembly

from

$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More

Powercraft – Pump Seal Kit (Part No.8754)

Pump Seal Kit

from

$45.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Idler Arm (Part No.K6187T)

Idler Arm

from

$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Heavy-duty design
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered steel composition results in a stronger component
  • Powdered metal gusher bearing design enables grease to flow through bearing to
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Tie Rod End Adjusting Sleeve

from

$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Engineered to meet or exceed OE Performance
  • Wrench flats on housing and stud provide easy installation and alignment adjustment.
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

Driveworks – Suspension Control Arm and Ball Joint Assembly (Part No.520-138)

Suspension Control Arm and Ball Joint Assembly

from

$149.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Driveworks’ Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:
  • Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
  • Direct replacement for a trouble-free installation
  • Steel, iron or aluminum construction ensures durability
  • Powder-coated or painted for long-lasting rust and corrosion resistance
See More

National – Bearings (Part No.DB-53313)

Bearings

from

$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)

Bulk - 3/8" ID Return Hose (CPE) (sold by each)

from

$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25522)

Tie Rod Sleeve

from

$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Lares – New Steering Coupling Assembly (Part No.202)

New Steering Coupling Assembly

from

$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More

National – Multi Purpose Seal (Part No.351267)

Multi Purpose Seal

from

$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Lares – Remanufactured Power Steering Pump (Part No.2391)

Remanufactured Power Steering Pump

from

$136.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Carquest Premium – Steering Column Housing Repair Kit (Part No.CSE1461)

Steering Column Housing Repair Kit

from

$31.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Powercraft – Steering Gear Major Seal Kit (Part No.7860)

Steering Gear Major Seal Kit

from

$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Ball Joint (Part No.K5108)

Ball Joint

from

$45.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • DESIGN CHANGE ┐ New and improved follower ball joint design to extend product life and simplify installation
  • PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Lares – Remanufactured Manual Steering Gear Box (Part No.1274)

Remanufactured Manual Steering Gear Box

from

$279.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Powercraft – Steering Gear Complete Rebuild Kit (Part No.8522)

Steering Gear Complete Rebuild Kit

from

$124.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Complete Rebuild Kit (Part No.7910)

Pump Complete Rebuild Kit

from

$62.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Ball Joint (Part No.K6145T)

Ball Joint

from

$53.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)

MOOG – Center Link (Part No.DS749)

Center Link

from

$95.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Powdered metal gusher bearing design enables grease to flow through bearing
  • Engineered steel composition results in a stronger component
  • Full ball metal stud provides 360 Degrees of smooth, consistent, rotational movement resulting in more responsive steering
  • Loose or worn chassis parts can lead to premature tire wear
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Tie Rod End (Part No.ES2034RLT)

Tie Rod End

from

$43.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Helping You Find the Right Steering and Chassis Parts for Your Oldsmobile 442

You love your 442. So we’ve made it easier than ever to help you find Oldsmobile 442 Steering and Chassis Parts in our online catalog. Our inventory holds 185 aftermarket and OEM Steering and Chassis Parts for your Oldsmobile 442, ranging from $2.99 to $951.99.

We offer parts from 17 brands trusted to make quality Steering and Chassis Parts for your Oldsmobile 442. Before you buy, take some time to read through customer reviews. We currently have 27,276 reviews of Oldsmobile 442 Steering and Chassis Parts from previous customers. Some of the top rated parts include Transmission Oil Cooler Hose with 4.2 stars and Power Steering Oil Cooler with 3.7 stars.

Find your 442 Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Oldsmobile 442 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Steering and Chassis Parts Brands for Your Oldsmobile 442

Our inventory holds Steering and Chassis Parts for your Oldsmobile 442 from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like Driveworks, Moog, and Carquest Premium, all of which can keep that Oldsmobile happy.
We have National parts available for your Oldsmobile 442 in categories like Steering Shafts. Some of the top-rated National parts in these categories are:
Multi Purpose Seal
from $11.99
(1)
Multi Purpose Seal
Steering Gear Pinion Shaft Seals
Multi Purpose Seal
from $31.49
(1)
Multi Purpose Seal
Pitman Shaft Seal Kits
Bearings
from $15.99
(38)
Bearings
Steering Shaft Bearings

Top-Rated MOOG Steering and Chassis Parts

Leading MOOG Steering and Chassis Parts

We carry MOOG brand parts for your Oldsmobile 442 across several catalog categories, including Sway Bars and Ball Joints. Some of our most reviewed MOOG parts include:
Stabilizer Bar Link Kit
from $23.99
(123)
Stabilizer Bar Link Kit
Sway Bar Link Kits
Ball Joint
from $52.99
(25)
Ball Joint
Suspension Ball Joint Kits
Ball Joint
from $53.99
(24)
Ball Joint
Suspension Ball Joint Kits

FAQs for Oldsmobile 442 Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the Oldsmobile 442?

Out of 185 Steering and Chassis Parts for the Oldsmobile 442, the most popular in our inventory are:
Stabilizer Bar Link
from $12.99
(56)
Stabilizer Bar Link
Sway Bar Link Bushing Kits
Taper Bearing Set
from $8.99
(47)
Taper Bearing Set
Worm Shaft Bearings
Stabilizer Bar Link
from $17.79
This product is not rated
Stabilizer Bar Link
Sway Bar Link Kits

What are the top-rated Oldsmobile 442 Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your Oldsmobile 442 based on customer reviews/ratings are:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
“Good quality and perfect inner diameter size”
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
“Installed and properly working”
Power Steering Filter
from $31.99
(59)
Power Steering Filter
“Looks good and fits well, plus LTW”