Nissan Sentra Brake Parts

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

• Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
• Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
• Quality assured – materials tested to exacting government-regulated safety and durability standards
• Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
• Brand may vary by location

Carquest Platinum Plus coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Platinum Plus coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Platinum Plus coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.

Product Features:

• Engineered to withstand 120 hours of salt spray testing
• Zinc and aluminum anti-corrosion coating maintains a like-new appearance
• Manufactured to exacting quality and dimensional specifications for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• OE configuration to dissipate heat, increasing pad life
• Proper harmonic design helps to reduce brake noise
• Brand may vary by location

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. Our manual parking brake calipers are provided as a complete assembly to include all adjusting hardware, actuating levers, return springs, clips and bolts. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!

Product Features:

• All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks.
• New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets
• High temperature EPDM rubber for extended life.
• Premium silicone lubrication provides smoother operation.
• The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.
• Our manual parking brake calipers are provided as a complete assembly to include all adjusting hardware, actuating levers, return springs, clips and bolts

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

• Wearever Brake Shoes come bonded or riveted based on OE design.
• Wearever Brake Shoes are coated to prevent rust.
• Wearever Brake Shoes are 100% New not remanufactured.
• Brand may vary by location

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. The difference between the checkered flag and 2nd place is measured in milliseconds. While there are many ways to shave time off your fastest lap, a brake upgrade is one of the best. For weekend track days and HPDE, our Track Day High-Performance Brake Kit can take the heat. This kit comes complete with PowerStop Track Day brake pads and Autospecialty rotors, taking the guesswork out of purchasing brakes for track use. As the official brake supplier of Radford Racing School (formerly Bondurant), Track Day brake pads are data-driven and tested to provide extreme fade resistance, low thermal conductivity, and consistent pedal feel. The Autospecialty brake rotors are 100% dynamic mill-balanced and provide a direct fit solution for your vehicle. Whether you’re a seasoned pro or just getting some weekend time on the grid, have confidence and control at every corner with PowerStop Track Day High-Performance Brake Kit.

Product Features:

• Stage 1 brake kit for beginning track day enthusiasts
• OE style non-coated replacement rotors are mill-balanced to ensure a smooth ride
• High coefficient of friction when cold, even higher when hot.
• Carbon-fiber & metallic pad compound
• Very consistent and stable modulation
• Abutment Clips or Tension Clips included
• Official brakes of Radford Racing School
• Buy with confidence from the originator & industry leader of brake kits

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. The Caliper Noise Damper helps prevent low frequency noise in the brake system.

Product Features:

• Manufactured with quality materials to suppress high stress levels
• Corrosion resistant coating for long-lasting durability against harsh roads
• Helps reduce low frequency noise

This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Hitachi Chemical’s disc brake pads have been proved to be highly reliable under a variety of conditions. They are used in automobiles in Japan and around the world, and have established a strong reputation in the markets. Hitachi has a reputation for manufacturing high quality pads for the OE and aftermarket using only the best products and materials. Each pad has specific features such as high braking function, noise resistance performance, and wear resistance performance contributes to the improvement of brake performance, reduction of the stopping distance, and extension of the service life.

Product Features:

• OE-Equivalent and Direct Fit application.
• Low noise and reduced vibrations.
• Formulated to OE Specifications.
• Superior friction qualities.
• Organic blended compound.

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Maintains proper movement for safe, effective stopping performance
• Prevents noise and premature wear

Brakes are designed as a system and all the parts need to work together for best performance. The Dust Hole Cover covers the brake adjustment slot from debris to keep your brakes running smoothly.

Product Features:

• Keeps out dirt and debris
• Direct replacement for a proper fit
• OE Fit and Function
• Maintains proper seal

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Mounting Bolts sets provide direct replacement for a proper fit every time. Our durable steel design helps to install the tool easily.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Manufactured with quality materials to suppress high stress levels
• Prevents noise and premature wear
• Corrosion resistant coating for long-lasting durability against harsh roads
• Finished off with thread locker for extra security

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Proper harmonic design and balance helps to reduce brake noise and vibration
• Optimal metallurgy and casting thickness to preventing warping

ACDelco Professional Cornering Light Socket is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket socket is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Increases the life span and maximizes performance of the Drum Brakes
• Manufactured with quality materials to suppress high stress levels
• Corrosion resistant coating for long-lasting durability against harsh roads

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and Exact fitment
• A necessary safety item for protecting the brake lines from harm
• Restores brakes to like-new performance

ABS Ring

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Buy with confidence from the originator & industry leader of brake kits

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Manufactured with quality materials to suppress high stress levels
• Maintains safe movement and effective stopping performance

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Increases the life span of the brake pads
• Restores brakes to like-new performance
• Prevents noise and premature wear
• Direct replacement for a proper fit

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

• Wheel cylinders match what was originally installed on the vehicle.
• Each cylinder matches OE for form, fit and function and material
• Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
• All bleeder screws are coated providing extra protection
• Rubber components are manufactured in house using the latest formula EPDM material.
• Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
• All casting machining is done by computer programed CNC machines.
• Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

Brake hardware consists of a variety of parts designed to assist in restoring your brake system to Like New Performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• Manufactured with quality materials to suppress high stress levels
• Helps deliver a quieter, more efficient braking system

The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

• Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
• Positive mold technology for consistent wear and performance
• Thermal scorched pad surface for a fast break-in
• Chamfered and slotted to ensure noise free braking
• Powder coated backing plate resists rust and corrosion to provide extended pad life
• Multi-Layer rubberized shims provide virtually noise-free braking
• Includes Premium stainless-steel hardware for easy installation

Choosing the right Semi Metallic brake pads is a big decision: after all, they will be fitted to a vehicle carrying precious cargo; so you need to make an informed choice and get it right. With more than 100 years’ experience, we are pioneers in the development of braking systems and technologies and work closely with the world’s leading vehicle manufacturers. As a consumer, you should expect safety, quality and performance from a brake pad. With its superior range of Semi Metallic Brake Pads, TRW offers you all that, and more. We design our Semi Metallic Brake Pads using vehicle-optimized friction formulations which are focussed on eliminating noise, vibration and harshness (NVH) and severely reducing wheel dust; while at the same time increasing durability and smooth braking actions. We engineer our brake pads to precise Original Equipment (OE) standards, and test them to the extreme both in the lab and in real life, real road situations at every speed and on every terrain. In addition, our Semi Metallic Brake Pads deliver what we in the business call ‘fadeless performance’ to counteract the heat that braking in heavy traffic creates which could result in a lack of performance. All TRW products are taken to market under the ‘Safety’ strapline. We never deviate from this and we never compromise because we believe that every stop could be that safety critical stop. We wouldn’t put our name to something that we wouldn’t fit in our own vehicles to transport our own families. All of this adds up to one fact: You really can trust TRW to provide superior Semi Metallic Brake Pads to deliver the ultimate in braking experience.

Product Features:

• For the best and safest performance – we mirror OE and provide the optimum friction formulation for each make and model
• For the quietest braking – TRW applies ‘bonded Nitrile rubber-coated steel shims; proven to be the best noise damping material to all its Semi Metallic Brake Pads
• The intelligent design includes slots and chamfers which prevents dirt and dust build up on the friction surface; giving more effective contact and reducing noise
• Using the latest technology, TRW designs its Semi Metallic Brake Pads with an emphasis on dust reduction; giving you the safest stop while keeping your wheels clean
• We provide all necessary accessories, including installation hardware and grease, together with fitting instructions with each part for a safe and easy brake pad change
• TRW covers 98% of all vehicles on the road in North America both imports and domestic