Nissan Quest Suspension Parts

Essential Nissan Quest Suspension Parts

MOOG – Trailing Arm (Part No.RK642893)

Trailing Arm

from

$41.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Construction and design validated by MOOG engineers
  • Broad coverage for foreign and domestic applications
  • R-Series (RK) products are the right choice for value-driven repair
See More

KYB – Spring Seat Insulator (Part No.SM5821)

Spring Seat Insulator

from

$8.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The Highest Quality Replacement Strut Mount Available
  • Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
  • Superior Rubber Reduces Noise, Vibration And Harshness
  • Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
  • Matched Grade Studs And Nuts
See More

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart

from

$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.908998)

Strut-Mate Strut Mounting Kit

from

$76.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

Carquest Premium – Complete Strut Assembly 18-920401: Includes Strut, Coil Spring and Mount (Part No.18-920401)

Complete Strut Assembly 18-920401: Includes Strut, Coil Spring and Mount

from

$159.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat (where applicable)
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets (where applicable)
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Firestone Ride-Rite – Air Spring, 500-1000Lb Leveling, Adjustable From 5-35Psi, Polyurethane (Part No.4118)

Air Spring, 500-1000Lb Leveling, Adjustable From 5-35Psi, Polyurethane

from

$138.99
Discover the difference Coil-Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil-Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RV and SUV. The adjustable Coil-Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil-Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil-Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:
  • Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
  • Increase Vehicle Stability, Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
  • Keep The Vehicle Level, Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
  • Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
  • Discover The Difference Coil Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
  • No Drill Installation
  • Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63619)

Strut-Mate Strut Boot Kit

from

$21.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Rare Parts – Leaf Spring Bushing (Part No.RP18704)

Leaf Spring Bushing

from

$32.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Heat Treated bushings
  • No Squeak
  • Reduces vibration
See More

KYB – Spring Seat (Part No.L5005569173KYB)

Spring Seat

from

$25.61
Spring Seat

Dorman – Suspension Control Arm (Part No.520-276)

Suspension Control Arm

from

$101.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Coil Spring Set (Part No.81585)

Coil Spring Set

from

$265.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

KYB – Shock Mount Kit (Part No.SM5462)

Shock Mount Kit

from

$18.29
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The Highest Quality Replacement Strut Mount Available
  • Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
  • Superior Rubber Reduces Noise, Vibration And Harshness
  • Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
  • Matched Grade Studs And Nuts
See More

Rare Parts – Control Arm Bushing (Part No.RP16371)

Control Arm Bushing

from

$94.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Suncore – Quick Strut Kit (Part No.2-55S11433-001)

Quick Strut Kit

from

$289.99
Quick Strut Kit

KYB – STRUT BELLOW (Part No.L303734949KYB)

STRUT BELLOW

from

$27.49
STRUT BELLOW

Original Equipment – Strut Bearing (Part No.L3035151998OEA)

Strut Bearing

from

$26.67
Strut Bearing

KYB – Jounce Bumper and Bellows (Part No.SB103)

Jounce Bumper and Bellows

from

$31.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

Monroe – OESpectrum Strut (Part No.71569)

OESpectrum Strut

from

$106.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63631)

Strut-Mate Strut Boot Kit

from

$37.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

MOOG – Strut Mount Kit (Part No.K80918)

Strut Mount Kit

from

$26.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • High polish chrome steel bearing races
  • Replacement helps restore vehicle handling
  • Superior rubber to steel bonding for durability
  • Engineered to meet or exceed OE requirements
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
See More

KYB – Gas Shock (Part No.344479)

Gas Shock

from

$76.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:
  • #1 Recommended Original Equipment Replacement Choice For Asian Mini-Vans
  • The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Nissan Quest
  • The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
  • Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
  • Made In Use
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
  • KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
See More

Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2168)

Controls Two Air Springs Individually, Switch Operated

from

$1217.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
See More

Rare Parts – STRUT MOUNT (Part No.RP53121)

STRUT MOUNT

from

$46.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Meets or exceeds OE requirements
  • Helps restore vehicle ride.
  • Reduces tire wear
See More

KYB – Strut Mount and Bearing (Part No.SM5838)

Strut Mount and Bearing

from

$95.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The Highest Quality Replacement Strut Mount Available
  • Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
  • Superior Rubber Reduces Noise, Vibration And Harshness
  • Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
  • Matched Grade Studs And Nuts
See More

Helping You Find the Right Suspension Parts for Your Nissan Quest

You love your Quest. So we’ve made it easier than ever to help you find Nissan Quest Suspension Parts in our online catalog. Our inventory holds 127 aftermarket and OEM Suspension Parts for your Nissan Quest, ranging from $6.29 to $1,217.99.

We offer parts from 17 brands trusted to make quality Suspension Parts for your Nissan Quest. Before you buy, take some time to read through customer reviews. We currently have 4,756 reviews of Nissan Quest Suspension Parts from previous customers. Some of the top rated parts include Strut Bellows with 3.0 stars and Strut Bellows with 3.8 stars.

Find your Quest Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Nissan Quest part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Suspension Parts Brands for Your Nissan Quest

Our inventory holds Suspension Parts for your Nissan Quest from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Monroe, and Driveworks, all of which can keep that Nissan happy.

FAQs for Nissan Quest Suspension Parts

What are the most purchased Suspension Parts for the Nissan Quest?

Out of 127 Suspension Parts for the Nissan Quest, the most popular in our inventory are:
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
from $11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Strut Bellow
from $11.99
(13)
Strut Bellow
Strut Bellows
Gas-Matic Truck Shock Absorber
from $48.99
(11)
Gas-Matic Truck Shock Absorber
Front Shock and Struts

What are the top-rated Nissan Quest Suspension Parts?

Top-rated Suspension Parts for your Nissan Quest based on customer reviews/ratings are:
Strut Bellows
from $34.99
(12)
Strut Bellows
“Worked as designed”
Strut Bellows
from $35.99
(10)
Strut Bellows
“worked”
Jounce Bumper and Bellows
from $31.49
(9)
Jounce Bumper and Bellows
“I would buy them if I did the job again”