Nissan Pickup Transmission Parts
Top Nissan Pickup Transmission Parts Categories
We carry over 69 Transmission Parts in inventory for the Nissan Pickup. If you’re looking for aftermarket Transmission Parts for your Nissan Pickup, check out all these categories:
Essential Nissan Pickup Transmission Parts
Sankei Switches – Sankei Switches Radiator Cap (Part No.G1010121551SAK)
from
$12.25
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.
Product Features:
See More
Product Features:
- Meets Original Equipment specifications.
- Made from premium materials.
- Designed to function on open cooling systems and overflow reservoir type systems.
Driveworks – Manual Transmission Main Shaft Seal (Part No.S-710324)
Carquest Premium – Neutral Safety Switch (Part No.SAC3926)
from
$73.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Driveworks – Oil Seal (Part No.S-224663)
from
$5.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
FAG – Wheel Bearing (Part No.K800033705FAG)
from
$36.29
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
National – Multi Purpose Seal (Part No.224266)
from
$16.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Taper Bearing Cup (Part No.S-LM-300811)
from
$5.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.221207)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Anchor – Transmission Mount: Rear, Left, Right, 1 Piece (Part No.8124)
from
$34.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to NISSAN 86-97;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1986-1997
- Weight approx: 4 Lbs
Driveworks – Oil Seal (Part No.S-1981)
from
$6.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
National – Multi Purpose Seal (Part No.224450)
from
$18.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)
from
$17.49
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 90 minutes
Carquest Premium – Vehicle Speed Sensor (Part No.SBA3947)
from
$142.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Back Up Light Switch (Part No.SBA4472)
from
$27.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-37)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
SKF – Pilot Bushing (Part No.I1030303587SKF)
from
$4.51
SKF’s clutch pilot bushings help guide and locate the driving plate in radial and axial directions and transfer loads from the clutch to the gearbox input shaft. They also enable a difference in rotational speed between crankshaft and gearbox input shafts during clutch actuation.
Product Features:
See More
Product Features:
- Extended service life
- High running accuracy
- Low noise and vibration level
- Extremely compact, lightweight design
- Very high temperature resistance
Dorman – Engine Oil Drain Plug (Part No.A6110831350DOR)
from
$5.46
Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
- Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
- Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)
from
$54.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 5″ x 15-7/8″
- Compact and mid-size cars
- GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Dorman – Oil Drain Plug Gaske (Part No.A6120831503DOR)
from
$10.60
Dorman’s Engine Oil Drain Plug Gaskets are conveniently available in packs of varying quantities. Many styles are offered, including Copper, Aluminum, Nylon, Metal/Rubber, Inset, Fiber and Crush gaskets. Replacement is recommended at every oil change. Oil filter caps are available separately.
Product Features:
See More
Product Features:
- Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
- Gaskets are also included with many of Dorman’s Engine Oil Drain Plugs and Pans
- Made to specific sizes and standards to ensure a proper fit
- Designed and constructed to strict engineering quality standards
Carquest Premium – Multi Purpose Relay (Part No.RAA1269)
from
$32.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
CRP – Washer (Part No.Y3001860060CRP)
from
$2.35
Washer
NOK – Drive Axle Seal (Part No.J7043157260NOK)
from
$9.91
Drive Axle Seal
National – Bearings (Part No.A-3)
from
$14.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Nissan Pickup Transmission Parts Categories
Helping You Find the Right Transmission Parts for Your Nissan Pickup
You love your Pickup. So we’ve made it easier than ever to help you find Nissan Pickup Transmission Parts in our online catalog. Our inventory holds 69 aftermarket and OEM Transmission Parts for your Nissan Pickup, ranging from $2.35 to $151.99.
We offer parts from 16 brands trusted to make quality Transmission Parts for your Nissan Pickup. Before you buy, take some time to read through customer reviews. We currently have 2,718 reviews of Nissan Pickup Transmission Parts from previous customers. Some of the top rated parts include Multi Purpose Seal with 4.4 stars and Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty with 4.5 stars.
Find your Pickup Transmission Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Nissan Pickup part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Transmission Parts Brands for Your Nissan Pickup
Our inventory holds Transmission Parts for your Nissan Pickup from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Driveworks, and National, all of which can keep that Nissan happy.
We have Permatex parts available for your Nissan Pickup in categories like Automatic Transmission Pan and Gaskets. Some of the top-rated Permatex parts in these categories are:
from
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
Transmission Pan Gaskets
Top-Rated Imperial Transmission Parts
Leading Imperial Transmission Parts
We carry Imperial brand parts for your Nissan Pickup across several catalog categories, including Transmission Cooler and Parts. Some of our most reviewed Imperial parts include:
FAQs for Nissan Pickup Transmission Parts
What are the most purchased Transmission Parts for the Nissan Pickup?
Out of 69 Transmission Parts for the Nissan Pickup, the most popular in our inventory are:
What are the top-rated Nissan Pickup Transmission Parts?
Top-rated Transmission Parts for your Nissan Pickup based on customer reviews/ratings are:
from
$16.49
(20)
Multi Purpose Seal
“Would have been fine most likely – if correct seal was in the box. For redoing a Front Crank Seal on a 4 cylinder 89 Ranger.”
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
from
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
