Nissan Pickup Clutch Systems
Top Nissan Pickup Clutch Systems Categories
We carry over 32 Clutch Systems in inventory for the Nissan Pickup. If you’re looking for aftermarket Clutch Systems for your Nissan Pickup, check out all these categories:
Essential Nissan Pickup Clutch Systems
Exedy – Pressure Plate (Part No.I2000166939DKN)
from
$111.57
All Exedy Pressure Plate assemblies endure a precise robotic testing process to ensure proper clamp load and clutch lift separation. This step ensures optimal pedal feel for better drivability. To help guarantee durability, the diaphragm spring (dark fingers in the center) receives special high frequency induction heat treating. This helps prevent the wear that normally occurs at the contact surface of the release bearing. Together, these procedures provide you a like-new pedal feel throughout the life of your clutch.
Product Features:
See More
Product Features:
- OE Quality
- Direct fit application
- Super low wear diaphram spring
- Specially high frequency induction heat treatment
LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC286)
from
$24.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Clutch Slave Cylinder (Part No.LSC200)
from
$21.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
ATP – FLYWHEEL SHIM (Part No.NS-2)
from
$18.99
FLYWHEEL SHIM
LuK – OE Quality Flywheel (Part No.LFW220)
from
$93.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
LUK – Flywheel (Part No.I1000835780LUK)
from
$110.56
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
National – Multi Purpose Bearing (Part No.DNE-01576-C)
from
$47.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.613015)
from
$64.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
LuK – Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline (Part No.06-059)
from
$170.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline (Part No.06-902)
from
$254.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Exedy – Clutch Disc (Part No.I2010134031DKN)
from
$84.87
EXEDY Engineers develop, perfect and manufacture our own friction materials. We produce a material with exceptional friction and wear characteristics that will help engage smoothly, grip as expected and provide you with a longer lasting installation. Disc Spring Dampers: This is the center section of the clutch disc. EXEDY spring-type disc dampers are patented worldwide to suppress engine and driveline noise by absorbing vibrations.
Product Features:
See More
Product Features:
- OE Quality
- Direct fit application
- Noise and vibration reduction technology reduces gear noise providing a quite smooth ride
- Wide angle damper design enables the clutch disc to hold more torque with less force
- Quiet pre-damper mechanism reduces gear noise during engine idle
Carquest Wearever – Brake Hydraulic Hose (Part No.H38119)
from
$15.99
Engineered from high-quality materials to ensure chemical and thermal resistance, ToughOne’s Clutch Hydraulic Hose restores and maintains optimal clutch performance. New hose replacement is recommended as part of a complete clutch repair for your vehicle.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Integral brackets included for ease of installation (where applicable)
- Clutch hoses with banjo-end fittings come with new copper washers for a tight seal
- All our Clutch Hydraulic Hoses are tested up to 4,000 PSI to ensure product safety standards are met
- Brand may vary by location
LUK – Clutch Master Cylinder (Part No.I3000567471LUK)
from
$52.05
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LuK – Clutch Master Cylinder (Part No.LMC254)
from
$36.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Nabtesco – Clutch Master Cylinder (Part No.I300054277NAB)
from
$100.20
The Nabtesco Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LuK – LuK Original Equipment Quality Replacement CLUTCH MASTER CYLINDER (Part No.LMC326)
from
$40.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Dorman – Clutch Pilot Bushing (Part No.690-004.1)
from
$2.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Clutch Release Bearing (Part No.S-PB-22)
Dorman – Clutch Pilot Bushing .629 In. x .816 In. Type A, Length .689 In. (sold by each) (Part No.690-004)
from
$2.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.PB-22)
from
$3.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel and bronze for outstanding durability and performance
- Oil impregnated for extended life
- Industry leading coverage
- Professional technicians know they can depend on National
ATP – CLUTCH FORK (Part No.ZA-111)
from
$39.99
CLUTCH FORK
Nissan Pickup Clutch Systems Categories
Helping You Find the Right Clutch Systems for Your Nissan Pickup
You love your Pickup. So we’ve made it easier than ever to help you find Nissan Pickup Clutch Systems in our online catalog. Our inventory holds 32 aftermarket and OEM Clutch Systems for your Nissan Pickup, ranging from $1.99 to $255.99.
We offer parts from 10 brands trusted to make quality Clutch Systems for your Nissan Pickup.
Find your Pickup Clutch Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Nissan Pickup part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Clutch Systems Brands for Your Nissan Pickup
Our inventory holds Clutch Systems for your Nissan Pickup from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like LuK, National, and Driveworks, all of which can keep that Nissan happy.
FAQs for Nissan Pickup Clutch Systems
What are the most purchased Clutch Systems for the Nissan Pickup?
Out of 32 Clutch Systems for the Nissan Pickup, the most popular in our inventory are:
from
$142.99
This product is not rated
Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline
Clutch Sets
