Nissan Frontier Alternators and Starters

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Product Features:
• Designed to meet or exceed OE specifications for fit, form and function
• Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
• All new components are utilized to ensure long service life
• Internal electronics are upgraded for heavy duty reliability (where applicable)
• Armatures and commutators are 100% load tested
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
• Designed to meet or exceed OE specifications for fit, form and function
• Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
• All new components are utilized to ensure long service life
• Internal electronics are upgraded for heavy duty reliability (where applicable)
• Armatures and commutators are 100% load tested
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• 100% remanufactured drive clutch assembly ensures lasting performance
• Armatures and commutators are 100% load tested
• New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• 100% remanufactured drive clutch assembly ensures lasting performance
• Armatures and commutators are 100% load tested
• New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• 100% remanufactured drive clutch assembly ensures lasting performance
• Armatures and commutators are 100% load tested
• New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

• Application matched components ensure the charging system can be returned to like new condition.

This Litens supplied OAP is manufactured by the original equipment (O.E.) manufacturer. This replacement pulley is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). Under rapid engine deceleration, the pulley disengages the alternator from the belt drive system, allowing the alternator to freewheel, re-engaging when the RPM increases. The OAP alternator pulley ensures smooth, quiet performance. The OAP is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component. Under normal driving conditions, the original pulley will require replacement in approximately 70,000 – 90,000 miles. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

This 130-amp alternator from WAI is a premium choice for those seeking reliability and performance. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation. Its advanced voltage regulator protection guards against transient voltage spikes, preventing potential battery damage, while the low saturation voltage minimizes heat dissipation for enhanced durability. The high-power rectifier assembly, featuring open junction press-fit diodes, is designed to keep the unit running cool even under demanding conditions. Fully compliant with ECU communication, this alternator guarantees seamless integration with your vehicle’s systems. Each unit comes with a printed copy of test results, providing transparency and confidence in its performance from the very first use. Built for long-lasting efficiency, this alternator delivers exceptional value and peace of mind for your vehicle’s electrical needs.

Product Features:

• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
• High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
• Built for long-lasting efficiency, this alternator is designed to deliver reliable performance and exceptional durability under demanding conditions.

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Product Features:
• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Regulators and rectifiers are 100% electronically load tested for reliable charging performance
• 100% new OE-quality brushes and bearings are used to ensure long service life
• Rotors and stators are load tested and double insulated for maximum charging performance
• Slip rings are precision polished for maximum brush contact and service life
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading limited warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading limited warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Product Features:
• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Regulators and rectifiers are 100% electronically load tested for reliable charging performance
• 100% new OE-quality brushes and bearings are used to ensure long service life
• Rotors and stators are load tested and double insulated for maximum charging performance
• Slip rings are precision polished for maximum brush contact and service life
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

This 110-amp alternator from WAI is a premium choice for those seeking reliability and performance. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation. The advanced voltage regulator protection guards against transient voltage spikes, preventing potential battery damage, while its low saturation voltage minimizes heat dissipation for enhanced durability. The high-power rectifier assembly, equipped with open junction press-fit diodes, keeps the unit running cool even under demanding conditions. Fully compliant with ECU communication, this alternator guarantees seamless integration with your vehicle’s system. Each unit comes with a printed copy of test results, providing transparency and confidence in its performance from the very first use. Designed for long-lasting efficiency, this alternator is a dependable solution for your vehicle’s electrical needs.

Product Features:

• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
• High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
• Designed for enhanced durability, the alternator’s low saturation voltage minimizes heat dissipation, ensuring long-lasting efficiency even under demanding conditions.

Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Product Features:
• Designed to meet or exceed OE specifications for fit, form and function
• Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• All new components are utilized to ensure long service life
• Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
• Internal electronics are upgraded for heavy duty reliability (where applicable)
• Regulators and rectifiers are 100% electronically load tested for reliable charging performance
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
• Rotors and stators are load tested and double insulated for maximum charging performance

The WAI 110 Amp alternator is a premium aftermarket solution designed to deliver reliable performance and durability. Engineered to meet or exceed OEM specifications, it ensures a perfect fit and hassle-free installation for your vehicle. Featuring advanced voltage regulator protection, this alternator is safeguarded against transient voltage spikes, preventing potential battery damage while maintaining efficient communication with the ECU. Its high-power rectifier assembly incorporates open junction press-fit diodes, ensuring cooler operation and extended longevity. With low saturation voltage, heat dissipation is minimized, enhancing overall efficiency. Each unit is rigorously tested, and a printed copy of the test results is included, providing transparency and confidence in its performance. This alternator is built to keep your vehicle running smoothly while offering exceptional value and reliability.

Product Features:

• Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
• Voltage regulator protection – load dump protected against transient voltage spikes avoiding potential battery damage. Low saturation voltage results in lower heat dissipation. Fully compliant in communication with ECU.
• High power rectifier assembly is designed with higher power open junction press fit diodes to keep the units running cool.
• Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
• Rigorously tested for durability and reliability, ensuring long-lasting performance under demanding conditions.

The Valeo premium alternator delivers exceptional performance and reliability, making it a top choice for automotive electrical systems. Built with 100% new components and core, this alternator eliminates the risk of premature failure, ensuring long-lasting durability compared to remanufactured units. Designed with application-specific parts for an exact fit, it integrates premium rare earth magnets to maximize output efficiency without increasing size. With an impressive 130-amp rating and 14 VDC voltage, this alternator is engineered to meet demanding electrical needs while maintaining high resistance to heat, vibration, and contaminants. Rigorous testing under extreme conditions for up to six months guarantees reliability in harsh environments. As a product from Valeo, a global leader in innovation and original equipment alternators, this unit enhances fuel economy and eliminates voltage drops, offering unmatched value and performance. Its clockwise rotation and OE family compatibility further ensure seamless integration into your vehicle’s system.

Product Features:

• Valeo premium alternators are 100% new products (not remanufactured)
• 100% new components and core eliminates premature failure for increased durability over remanufactured units
• All parts are application specific for an exact fit
• Premium rare earth magnets increase the output of the alternator without increasing the size for better efficiency
• All applications go under extreme condition testing up to 6 months to ensure reliability under the harshest conditions and electrical demands
• High resistance to heat, vibration, and contaminating particles helps maintain maximum charge output

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Regulators and rectifiers are 100% electronically load tested for reliable charging performance
• 100% new OE-quality brushes and bearings are used to ensure long service life
• Rotors and stators are load tested and double insulated for maximum charging performance
• Slip rings are precision polished for maximum brush contact and service life
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.