Nissan Altima Steering and Chassis Parts

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Heat treated components
• Dust seal to prevent contamination
• Restores vehicle handling
• Restores OE alignment

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100 percent tested to ensure proper fit and function.

Product Features:

• 100 percent testing ensures leak-free performance.
• Designed to match O.E. fit, function and performance.
• Manufactured from O.E. grade material for strength and durability.
• Resistant to cracking caused by the high temperatures in the engine compartment.
• Reservoirs with integrated filter have the same filtration efficiency as O.E.

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
• STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
• GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
• RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Can bring vehicles back to factory specification
• Can solve excessive tire wear and steering issues
• Shims and bushings provide precise camber, caster and toe adjustments
• Incorporates proven design and engineering features
• Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

Built to withstand a variety of weather conditions and extreme temperatures, our power steering pressure hoses are designed to last through daily wear and tear while delivering smooth and quiet performance, every time. Each hose in the Edelmann Elite line has a durable zinc coating that actively protects against and helps to prevent rust and corrosion damage, and each hose also features innovative heat/abrasion tubing that is specifically designed to hold up to a range of temperatures – from the freezing cold to extreme heat waves. Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity. Every Edelmann Elite hose is equipped with the identical OEM fitting as the hose being replaced. This ensures a good seal when installed properly. All bends are made to the exact specification of the OEM hose. This ensures that the hose will fit in the space provided and takes the course of the original OEM hose. Plews & Edelmann is a leading designer, manufacturer and distributor of a broad range of automotive parts, accessories, gadgets, and tools sold to the vast majority of mass merchant, retail auto parts stores and wholesale automotive parts and industrial distribution outlets worldwide.

Product Features:

• Superior temperature range performance ensures function at any temperature.
• Outstanding impulse durability increases longevity of the hose.
• Constructed to OEM form, fit, and function to ensure ease of installation and ongoing performance.

Camber Bolt Kit

This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Insulates Rack & Pinion from Frame.
• Stabilizes Rack & Pinion

Product Features:

• EASY TO INSTALL – Wrench flats ensure easy installation and removal
• GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
• KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
• STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
• PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

• Protective coating applied to each unit to extend the life of the unit (where applicable).
• 100 percent performance testing to ensure perfect fit, function and reliable performance.
• 100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
• Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
• 100 percent new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
• All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
• Valve housings have polished micro-finish sleeves for durability (where applicable).
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

Fixing a worn wheel bearing would traditionally require a difficult procedure using a hydraulic press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install. For repair shops, that makes it less likely that you will have a vehicle stuck in the service bay. For vehicle owners, that makes this formerly complex job requiring special equipment much easier.

Product Features:

• Pre-pressed assembly – this complete loaded knuckle kit includes all necessary components ready for installation right out of the box
• Saves hours – eliminates the possibility of extended time spent wrestling with individual corroded components
• Simpler solution – no need for hydraulic press to perform complete bearing repair, making replacement faster and more predictable for both professionals and DIYers
• Quality engineering – designed in the United States and backed by a century of automotive aftermarket experience

All Steering Power Filter

This replacement steering knuckle insert is engineered to match the fit and durability of the original equipment insert that may have become damaged or dislocated during routine service.

Product Features:

• Ideal replacement – this steering knuckle insert matches the dimensional specifications of the original equipment insert
• Durable construction – this part is made of quality materials for reliable service and durability
• Time-saving solution – this steering knuckle insert saves the time and hassle of removing an original sleeve that may have become dislodged or damaged during removal
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

• Meets or exceeds OE performance specifications
• Performance tested to ensure durability
• Forged micro-alloy steel construction for strength and durability
• A slotted nut and cotter pin for a more secure installation

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Manufactured using premium materials
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features

CAM BOLT KIT

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Power Steering Pressure Switch monitors the hydraulic pressure in the power steering system, enhancing safety and performance by alerting the driver to potential issues such as low fluid levels or system malfunctions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

• Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
• Reliable fit – precision-engineered to match the dimensions of original components
• Trustworthy construction – manufactured to strict standards using durable materials
• Rigorously tested – thorough quality control measures ensure longevity

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Manufactured using premium materials
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

• Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
• Durable construction – made of quality materials for leak-free performance and a long service life
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

• Zinc coated tubes protect against rust and corrosion

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission oil cooler hose
• 11/32″ x 4-1/2′
• Designed for transmission fluid applications
• Made for tight-radius applications found in transmission cooler installations
• Compatible with 11/32 in. OEM cooler systems
• Tube made of black chemigum (nitrile)
• Reinforced with 2-spiral synthetic
• Covered in black Hypalon
• Compatible with 11/32 in. OEM cooler systems
• Tube made of black chemigum (nitrile)
• Reinforced with 2-spiral synthetic
• Covered in black Hypalon