Nissan Altima Diesel Glow Plugs

Shock Absorber

Starting a diesel engine? Check out Autolite glow plugs. They’re dependable and long-lasting, the perfect plug for a variety of diesel applications.

Product Features:

• Diesel engines depend on high heat in the combustion chamber to ignite the fuel. When you cold start a diesel engine, there isn’t enough heat to ignite. Glow plug warms the combustion chamber to start the fuel ignition.
• These glow plugs fit a variety of diesel applications. If you’re experiencing problems starting your diesel engine, it may have burnt out glow plugs.
• Reaches temperatures hot enough to start in 30 seconds or less
• For dependability and long-lasting performance, use Autolite glow plugs

Shock Absorber

Shock Absorber

Shock Absorber

Gas Shock

Shock Absorber

Shock Absorber

Gas Shock

Shock Absorber

Gas Shock

Gas Shock

Shock Absorber

Shock Absorber

NGK metal glow plugs are trusted by OEM diesel engine manufacturers around the world to perform under the harshest conditions. NGK metal glow plugs are equipped with a heating coil in a glow rod made of heat-resistant magnesium oxide between the heating and regulating coils. Magnesium oxide is an outstanding thermal conductor (quickly dissipating heat), while protecting the heating coils from vibration and shock. NGK metal glow plugs feature excellent gas-tight sealing qualities that deliver superior electrical insulation and protection against combustion gas. NGKs metal composition helps reduce carbon accumulation to prevent short circuits, while the unique shell design provides excellent heat transfer.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction metal glow plug
• SUPERIOR DURABILITY: Metal glow plugs are designed to withstand thermal shock due to quick changes in temperature
• FAST HEATING PERFORMANCE: Fast heat up enables smooth engine starts even in extreme weather conditions
• CLEAN PERFORMANCE: Constant afterglow temperature minimize noxious pollutants
• RECOMMENDED USAGE: Best for diesel engines with OE metal glow plugs

Gas Shock

NGK metal glow plugs are trusted by OEM diesel engine manufacturers around the world to perform under the harshest conditions. NGK metal glow plugs are equipped with a heating coil in a glow rod made of heat-resistant magnesium oxide between the heating and regulating coils. Magnesium oxide is an outstanding thermal conductor (quickly dissipating heat), while protecting the heating coils from vibration and shock. NGK metal glow plugs feature excellent gas-tight sealing qualities that deliver superior electrical insulation and protection against combustion gas. NGKs metal composition helps reduce carbon accumulation to prevent short circuits, while the unique shell design provides excellent heat transfer.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction metal glow plug
• SUPERIOR DURABILITY: Metal glow plugs are designed to withstand thermal shock due to quick changes in temperature
• FAST HEATING PERFORMANCE: Fast heat up enables smooth engine starts even in extreme weather conditions
• CLEAN PERFORMANCE: Constant afterglow temperature minimize noxious pollutants
• RECOMMENDED USAGE: Best for diesel engines with OE metal glow plugs

NGK metal glow plugs are trusted by OEM diesel engine manufacturers around the world to perform under the harshest conditions. NGK metal glow plugs are equipped with a heating coil in a glow rod made of heat-resistant magnesium oxide between the heating and regulating coils. Magnesium oxide is an outstanding thermal conductor (quickly dissipating heat), while protecting the heating coils from vibration and shock. NGK metal glow plugs feature excellent gas-tight sealing qualities that deliver superior electrical insulation and protection against combustion gas. NGKs metal composition helps reduce carbon accumulation to prevent short circuits, while the unique shell design provides excellent heat transfer.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction metal glow plug
• SUPERIOR DURABILITY: Metal glow plugs are designed to withstand thermal shock due to quick changes in temperature
• FAST HEATING PERFORMANCE: Fast heat up enables smooth engine starts even in extreme weather conditions
• CLEAN PERFORMANCE: Constant afterglow temperature minimize noxious pollutants
• RECOMMENDED USAGE: Best for diesel engines with OE metal glow plugs

NGK metal glow plugs are trusted by OEM diesel engine manufacturers around the world to perform under the harshest conditions. NGK metal glow plugs are equipped with a heating coil in a glow rod made of heat-resistant magnesium oxide between the heating and regulating coils. Magnesium oxide is an outstanding thermal conductor (quickly dissipating heat), while protecting the heating coils from vibration and shock. NGK metal glow plugs feature excellent gas-tight sealing qualities that deliver superior electrical insulation and protection against combustion gas. NGKs metal composition helps reduce carbon accumulation to prevent short circuits, while the unique shell design provides excellent heat transfer.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction metal glow plug
• SUPERIOR DURABILITY: Metal glow plugs are designed to withstand thermal shock due to quick changes in temperature
• FAST HEATING PERFORMANCE: Fast heat up enables smooth engine starts even in extreme weather conditions
• CLEAN PERFORMANCE: Constant afterglow temperature minimize noxious pollutants
• RECOMMENDED USAGE: Best for diesel engines with OE metal glow plugs

Designed, tested and manufactured to original equipment standards, this high-quality, direct fit OE replacement glow plug offers exceptional quality. Features ultra-fast warm-up, unbeatable cold engine performance and reduced pollutant emissions.

Product Features:

• 11 Volt, 90 watt electrical rating
• M12 x 1.25 thread
• Ultra-fast warm-up
• Unbeatable cold engine performance

Formulated to meet the specific requirements of Nissan and Infiniti vehicles equipped with conventional (non-CVT) transmissions that require the use of Matic J ATF (including Matic D and Matic K). Recommended for service-fill in all Nissan and Infiniti automatic transmissions where Matic J ATF is specified. This fluid is also recommended for certain Hyundai, Kia, Jaguar and Mitsubishi vehicles (refer to Specifications and Approvals for specific recommendations).. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

• Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
• Advanced anti-wear technology provides maximum protection to gears and bearings

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

• Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
• Advanced anti-wear technology provides maximum protection to gears and bearings

IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Product Features:

• Unique friction technology provides efficient and noise-free operation
• Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
• Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
• Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
• Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life