Nissan 240SX Steering and Chassis Parts

Essential Nissan 240SX Steering and Chassis Parts

Driveworks – Steering Tie Rod End (Part No.DW-EV169)

Steering Tie Rod End

from

$22.79
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing from specific materials provides strength and durability to prevent breakage
  • Coated technology provides a smooth and durable surface to prevent corrosion and rust
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
  • A slotted nut and cotter pin for a more secure installation
See More

Whiteline – Hicas Hydraulic Lock Kit (Part No.KSR204)

Hicas Hydraulic Lock Kit

from

$143.99
KSR204 is designed to disable the Hydraulic HICAS rear-steer system. Disabling the HICAS unit has been proven to provide greater vehicle stability and more predictable handling at the limit, allowing faster lap times.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Cardone – Power Steering Pump (Part No.21-5080)

Power Steering Pump

from

$153.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Corteco – Power Steering Pump Repair Kit (Part No.M2040307575CFW)

Power Steering Pump Repair Kit

from

$30.31
Power Steering Pump Repair Kit

Whiteline – Strut Rod To Chassis Bushing (Part No.KCA331)

Strut Rod To Chassis Bushing

from

$92.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Carquest Premium – End Fittings – Straight (Part No.34819)

End Fittings - Straight

from

$9.79
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Whiteline – Sway Bar 24Mm Xx Heavy Duty Blade Adjustable Motorsport (Part No.BNR11XXZ)

Sway Bar 24Mm Xx Heavy Duty Blade Adjustable Motorsport

from

$313.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 2 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8738)

Rack Pinion Seal Kit

from

$87.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Whiteline – Subframe Mount Bushing (Part No.W92446)

Subframe Mount Bushing

from

$154.99
The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.

Product Features:
  • Precisely placed dampening voids further reduces harshness from sudden road inputs.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Specially bonded design for optimised strength typically required in high load bearing applications.
  • Precisely placed dampening voids further reduces harshness from sudden road inputs.
See More

MOOG – Ball Joint (Part No.K9820)

Ball Joint

from

$47.49
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Alignment Cam Bolt Assortment

from

$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can solve excessive tire wear and steering issues
  • Provides like-new steering, ease of installation and longer life
  • Can bring vehicles back to factory specification
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

EMPI – Steering Rack Boot Kit, 1 Boot + Clamps (Part No.M1030133651EMP)

Steering Rack Boot Kit, 1 Boot + Clamps

from

$19.67
Steering Rack Boot Kit, 1 Boot + Clamps

Whiteline – Sway Bar Link Washers (Part No.KW2)

Sway Bar Link Washers

from

$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Whiteline – Strut Rod To Chassis Bushing (Part No.W81707A)

Strut Rod To Chassis Bushing

from

$114.99
Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

MOOG – Ball Joint (Part No.K9509)

Ball Joint

from

$89.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Patent pending dust boot with encapsulated Belleville washer help control axial and radial movement
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Dorman – Alignment Camber / Toe Lateral Link (Part No.528-107)

Alignment Camber / Toe Lateral Link

from

$308.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Tie Rod End (Part No.RP27169)

Tie Rod End

from

$81.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Powercraft – Rack Pinion Seal Kit (Part No.9065)

Rack Pinion Seal Kit

from

$92.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Whiteline – Sway Bar Link (Part No.KLC107)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • Articulation voids deliver necessary suspension articulation and/or compression under loads.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
See More

Powercraft – Pump Seal Kit (Part No.8724)

Pump Seal Kit

from

$46.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13104R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)

Bulk - 3/8" I.D. Return Hose J189

from

$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Dorman – Suspension Control Arm (Part No.520-505)

Suspension Control Arm

from

$99.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Helping You Find the Right Steering and Chassis Parts for Your Nissan 240SX

You love your 240SX. So we’ve made it easier than ever to help you find Nissan 240SX Steering and Chassis Parts in our online catalog. Our inventory holds 93 aftermarket and OEM Steering and Chassis Parts for your Nissan 240SX, ranging from $1.81 to $630.99.

We offer parts from 20 brands trusted to make quality Steering and Chassis Parts for your Nissan 240SX. Before you buy, take some time to read through customer reviews. We currently have 6,370 reviews of Nissan 240SX Steering and Chassis Parts from previous customers. Some of the top rated parts include Tie Rod End with 4.6 stars and Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars.

Find your 240SX Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Nissan 240SX part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Steering and Chassis Parts Brands for Your Nissan 240SX

Our inventory holds Steering and Chassis Parts for your Nissan 240SX from 20 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Carquest Premium, and Cardone, all of which can keep that Nissan happy.
We have Dorman parts available for your Nissan 240SX in categories like Ball Joints. Some of the top-rated Dorman parts in these categories are:
Suspension Control Arm
from $99.99
(1)
Suspension Control Arm
Lower Control Arm and Ball Joints

Top-Rated Imperial Steering and Chassis Parts

Leading Imperial Steering and Chassis Parts

We carry Imperial brand parts for your Nissan 240SX across several catalog categories, including Power Steering Parts. Some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for Nissan 240SX Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the Nissan 240SX?

Out of 93 Steering and Chassis Parts for the Nissan 240SX, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses

What are the top-rated Nissan 240SX Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your Nissan 240SX based on customer reviews/ratings are:
Tie Rod End
from $32.99
(27)
Tie Rod End
“Fits 2000 Maxima!”
Bulk - 3/8" I.D. Return Hose J189
from $46.49
(17)
Bulk – 3/8" I.D. Return Hose J189
“There is plenty of hose to get the job done”
Steering Tie Rod End
from $31.99
(14)
Steering Tie Rod End
“excelente calidad”