Mitsubishi Lancer Steering and Chassis Parts

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

• Protective coating applied to each unit to extend the life of the unit (where applicable).
• 100 percent performance testing to ensure perfect fit, function and reliable performance.
• 100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
• Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
• 100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
• All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
• Valve housings have polished micro-finish sleeves for durability (where applicable).
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

Whiteline adjustable camber kits allow for easy on-car adjustment and fine tuning of camber settings resulting in improved traction, increased cornering grip and better tyre life – ultimately improving overall performance. The kit includes low compliance synthetic elastomer bushings which maintain preferred alignment settings as well as enhanced steering response.

Product Features:

• Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

CAM BOLT KIT

Whiteline heavy duty rear sway bar mounting saddle kits are designed to replace the original equipment mounts with a stronger more rigid version. This Whiteline kit improves sway bar response and should be used for large diameter or adjustable sway bars especially when running the stiffer sway bar settings as factory mounts will twist/ flex and potentially fail prematurely.

Product Features:

• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:

• Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
• EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Inner sleeve is phosphate coated for corrosion protection

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Heat treated components
• Dust seal to prevent contamination
• Restores vehicle handling
• Restores OE alignment

Whiteline bump steer correction kits are designed to correct suspension geometry improving dynamic toe settings during wheel travel. A reduction to bump steer results in sharper handling and reduced understeer.

Product Features:

• Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

Whiteline bump steer kit is designed to change bump steer characteristics depending on driving conditions. For racing it is beneficial to reduce the amount of bump steer to give a more positive feel – sharper handling – reduced understeer.

Product Features:

• Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

• Forged housing from specific materials provides strength and durability to prevent breakage
• Coated technology provides a smooth and durable surface to prevent corrosion and rust
• Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
• A slotted nut and cotter pin for a more secure installation

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

• Meets or exceeds OE performance specifications
• Premium Polychloroprene boot provides extended temperature range and better wear resistance
• Test-proven stud material helps prevent premature stud failure
• Provides premium gauge steel construction for strength and durability
• Performance tested to ensure durability

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
• LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
• ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
• ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

All Steering Power Filter

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your toe arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

• By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
• Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
• Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Power steering oil cooler
• Size: 3/4″ x 2-1/2″ x 9″
• For vehicles with 3/8″ I.D. power steering return hose
• Removes destructive heat and prolongs power steering system life
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 26mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

• DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
• DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
• GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
• ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
• PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
• STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
• EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• SAE J188 compliant high pressure rubber compound hose with internal noise absorber
• SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.