Mitsubishi Lancer Exhaust Parts

Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker® Quiet-Flow® SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:

• CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
• EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
• BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
• PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
• DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on

MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99234HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
• Compact, lightweight construction enables installation in confined areas, welding is required.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52122 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 2004 Mitsubishi Lancer. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Exhaust Manifold Gasket

Exhaust Manifold Gasket

Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

• AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
• HEAT RESISTANT — Designed to resist heat for long-lasting performance
• PREMIUM MATERIALS — Made from high-quality materials for durability and long life
• ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
• REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
• BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
• Convenient kit – includes gaskets and downpipe hardware to simplify installation
• Durable construction -manufactured within strict tolerances for reliable longevity
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker® Ultra® EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE — Features thick OE-style flanges and manifolds for strength and durability
• OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

BRExhaust direct-fit exhaust resonator and pipe assemblies are designed to install easily and help you retain the OE exhaust sound you are looking for. Increase horsepower and torque with this corrosion resistant direct-fit component. Aluminized steel construction ensures maximum durability.

Product Features:

• Direct-fit configuration
• Easy Installation
• Engineered to provide excellent exhaust performance
• Made from 16-gauge aluminized tubing
• Increases horsepower and torque
• Corrosion resistant
• Built to OEM specifications

Designed to fit, perform and sound like the original system, Walker® resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:

• EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
• RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
• FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
• STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
• GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system

Exhaust Pipe Gasket

The MagnaFlow 2008-2011 Mitsubishi Lancer Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L, 2.4L 2008-2011 Mitsubishi Lancer with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Mitsubishi Lancer exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mitsubishi Lancer’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16822 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16822 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The all new Takeda Retain Intake System produces up to 9HP and 9lbs. x ft. of torque over stock, while outflowing the factory intake by 24%. A one-piece powder-coated heat shield is used to protect the filter from unwanted hot engine air for maximum performance. Takeda intakes come complete with all necessary hardware. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• Pro 5R Filter Media
• Cleans In A Matter Of Minutes
• No Oil Required

The MagnaFlow 2009-2011 Mitsubishi Lancer Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2009-2011 Mitsubishi Lancer with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5 x 5.5in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Mitsubishi Lancer exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mitsubishi Lancer’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15597 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15597 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2002-2003 Mitsubishi Lancer Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2002-2003 Mitsubishi Lancer with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 3.5in. Polished Welded-On Double Wall Straight Cut Folded Edge tips, this Mitsubishi Lancer exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mitsubishi Lancer’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15805 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15805 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

BRExhaust exhaust pipes are designed for easy bolt-on installations. Thicker gauge metal prevents the need for flow-resistant wrinkle bends, thereby enhancing overall exhaust performance. This pipe is engineered to meet OE specs to ensure performance, reliability and a precise factory-like fit. This part features a direct-fit design allowing for easy installation. If you are looking for a replacement exhaust pipe that will fit and perform exactly like the stock one while lasting even longer, BRExhaust is the brand you can rely on.

Product Features:

• Manufactured according to strict OE standards
• Sturdy design featuring premium-grade materials
• Precise fitment
• Hassle-free installation and functionality verified by comprehensive testing procedures
• Easy installation
• Direct-fit exhaust system component that saves installation time

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

• RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
• EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
• OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
• BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
• AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information