Mitsubishi Cordia Brake Parts
Top Mitsubishi Cordia Brake Parts Categories
We carry over 9 Brake Parts in inventory for the Mitsubishi Cordia. If you’re looking for aftermarket Brake Parts for your Mitsubishi Cordia, check out all these categories:
Essential Mitsubishi Cordia Brake Parts
Carquest Premium – Multi Purpose Relay (Part No.RAA1251)
from
$20.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA100979)
from
$23.49
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA38275)
from
$26.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hydraulic Hose (Part No.BHA38126)
from
$14.49
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.
Product Features:
See More
Product Features:
- Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
- Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
- Quality assured – materials tested to exacting government-regulated safety and durability standards
- Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
- Brand may vary by location
Carquest Standard – Brake Pads : Front, Reliable and Dependable Stopping (Part No.MKD284)
from
$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.
Product Features:
See More
Product Features:
- Dependable stopping power
- Single layer shim for quiet braking
- OE-designed slots and chamfers to reduce noise and vibration
- Powder-coated backing plate prevents corrosion
Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.15201)
from
$7.29
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.
Product Features:
See More
Product Features:
- This part matches Original Equipment (OE) quality specifications
- Increases the life span of the brake pads
- Restores brakes to like-new performance
- Prevents noise and premature wear
- Direct replacement for a proper fit
Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2135)
from
$114.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
Product Features:
See More
Product Features:
- 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
- Exclusive rust-prohibitive finishing process extends unit life.
- Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
- All units are 100% tested to ensure reliable performance.
- Guaranteed fit and function.
Wearever – Remanufactured Brake Master Cylinder (Part No.11-2396)
from
$49.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
Product Features:
See More
Product Features:
- Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
- Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
- Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
- Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
- Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
- Plastic reservoirs are vacuum-tested to ensure they are leak free.
- Plastic reservoirs are 100% vacuum-tested to ensure proper function
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Mitsubishi Cordia Brake Parts Categories
Helping You Find the Right Brake Parts for Your Mitsubishi Cordia
You love your Cordia. So we’ve made it easier than ever to help you find Mitsubishi Cordia Brake Parts in our online catalog. Our inventory holds 9 aftermarket and OEM Brake Parts for your Mitsubishi Cordia, ranging from $7.29 to $114.99.
We offer parts from 4 brands trusted to make quality Brake Parts for your Mitsubishi Cordia. Before you buy, take some time to read through customer reviews. We currently have 142 reviews of Mitsubishi Cordia Brake Parts from previous customers.
Find your Cordia Brake Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mitsubishi Cordia part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Brake Parts Brands for Your Mitsubishi Cordia
Our inventory holds Brake Parts for your Mitsubishi Cordia from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Cardone, Carquest, and Carquest Premium, all of which can keep that Mitsubishi happy.
We have Carquest Wearever parts available for your Mitsubishi Cordia in categories like Brake Kits. Some of the top-rated Carquest Wearever parts in these categories are:
Top-Rated Cardone Brake Parts
Leading Cardone Brake Parts
We carry Cardone brand parts for your Mitsubishi Cordia across several catalog categories, including Brake Master Cylinders. Some of our most reviewed Cardone parts include:
FAQs for Mitsubishi Cordia Brake Parts
What are the most purchased Brake Parts for the Mitsubishi Cordia?
Out of 9 Brake Parts for the Mitsubishi Cordia, the most popular in our inventory are:
