Mercury Monarch Clutch Systems
Top Mercury Monarch Clutch Systems Categories
We carry over 26 Clutch Systems in inventory for the Mercury Monarch. If you’re looking for aftermarket Clutch Systems for your Mercury Monarch, check out all these categories:
Essential Mercury Monarch Clutch Systems
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-501)
from
$28.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-503)
from
$39.49
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Automatic Transmission Flex Plate (Part No.Z-125)
from
$69.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Hays – Flywheels (Part No.12-030)
from
$160.99
Flywheels
Hays – Flywheel: Late Ford 28Lb Steel (Part No.12-540)
from
$422.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Driveworks – Clutch Release Bearing (Part No.S-614014)
from
$15.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Clutch Release Bearing (Part No.614014)
from
$28.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Hays – Power Train (Part No.70-230)
from
$110.99
Power Train
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$11.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (Sold by each) (Part No.678-154)
from
$4.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Thread Size: 7/16-20
- Tread Length: 0.900 in.
- SAE
- PLEASE NOTE: Item priced and sold by each. See store for details.
ATP – M/T FLYWHEEL BOLT (Part No.ZX-1006)
from
$25.99
M/T FLYWHEEL BOLT
Dorman – Help – Clutch Pilot Bearing (Part No.14677)
from
$24.99
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Ball Bearing (Part No.S-201-CC)
from
$2.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
LuK – Clutch Kit: 10" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-016)
from
$145.99
LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
- Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
- Kits include everything needed for a quick, correct fit and reliable clutch performance.
LuK – Clutch Kit: 8 1/2" Disc Diameter, 1 1/16" Input Shaft Diameter, 23 Tooth Spline (Part No.07-003)
from
$132.99
LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
- Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
- Kits include everything needed for a quick, correct fit and reliable clutch performance.
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$27.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$28.99
FLYWHEEL SHIM
ARP Auto Racing – For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile (Part No.150-2201)
from
$18.99
The importance of pressure plate bolts in a racing or Hi Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 180,000 PSI
- Sold As A Kit
- 0.78″ Underhead Length
Mercury Monarch Clutch Systems Categories
Helping You Find the Right Clutch Systems for Your Mercury Monarch
You love your Monarch. So we’ve made it easier than ever to help you find Mercury Monarch Clutch Systems in our online catalog. Our inventory holds 26 aftermarket and OEM Clutch Systems for your Mercury Monarch, ranging from $2.99 to $422.99.
We offer parts from 7 brands trusted to make quality Clutch Systems for your Mercury Monarch. Before you buy, take some time to read through customer reviews. We currently have 349 reviews of Mercury Monarch Clutch Systems from previous customers. Some of the top rated parts include Manual Transmission Flywheel Ring Gear with 5.0 stars and Ball Bearing with 1.0 stars.
Find your Monarch Clutch Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercury Monarch part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Clutch Systems Brands for Your Mercury Monarch
Our inventory holds Clutch Systems for your Mercury Monarch from 7 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, National, and ATP, all of which can keep that Mercury happy.
We have Dorman – Help parts available for your Mercury Monarch in categories like Clutch Pilot Bearings and Flywheels. Some of the top-rated Dorman – Help parts in these categories are:
FAQs for Mercury Monarch Clutch Systems
What are the most purchased Clutch Systems for the Mercury Monarch?
Out of 26 Clutch Systems for the Mercury Monarch, the most popular in our inventory are:
What are the top-rated Mercury Monarch Clutch Systems?
Top-rated Clutch Systems for your Mercury Monarch based on customer reviews/ratings are:
from
$2.99
(1)
Ball Bearing
“output shaft of trans will not slide into. Diameter of opening is not big enough. buy the jap bearing part # 6201nk”
from
$70.99
(1)
Automatic Transmission Flex Plate
“This did not fit my Bronco. The tolerances were off for this product. The holes to bolt it to the crankshaft were off, and yes i tried rotating it to ”
