Mercury Comet Suspension Parts
Top Mercury Comet Suspension Parts Categories
We carry over 38 Suspension Parts in inventory for the Mercury Comet. If you’re looking for aftermarket Suspension Parts for your Mercury Comet, check out all these categories:
Essential Mercury Comet Suspension Parts
MOOG – Coil Spring Set (Part No.8088)
from
$149.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
KAI – Control Arm (Part No.GMK302197368S)
from
$104.99
New Goodmark Driver Or Passenger Side Front Lower Control Arm Assembly, 2 Required
Product Features:
See More
Product Features:
- 2 Required
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rare Parts – Coil Springs (Part No.RP45576)
from
$129.99
Coil Springs
Monroe – Max-Air Air Shock Absorber (Part No.MA709)
from
$136.99
The Max-Air® shock absorber is ideal for vehicles that haul heavy loads or tow trailers. Designed to maintain level vehicle height, they can be inflated or deflated as needed…from 20 psi to 150 psi with the vehicle loaded. Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual for details.
Product Features:
See More
Product Features:
- 1/2 inch Piston Rod: Hardened and precision ground rod for consistent performance and long service life.
- All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
- Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
- Large Volume Air Chamber: Inflates up to 150 psi with vehicle loaded. Deflates for normal driving.
- Lubricated Air Sleeve: Reduces friction for longer service life. Provides smoother operation during suspension movement.
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)
from
$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Whiteline – Spring Saddle (Part No.W71407G)
from
$76.99
Whiteline’s design is incorporated with a robust housing and a grease free pivot pin has revolutionized this component.
Product Features:
See More
Product Features:
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
- Specially bonded design for optimised strength typically required in high load bearing applications.
KYB – Gas Shock (Part No.343156)
from
$71.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Product Features:
See More
Product Features:
- KYB Recommended Orem Replacement Shock For Classic, Domestic Cars
- The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Vehicle
- The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
- Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
- KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
Monroe – Load Adjusting Shock Absorber (Part No.58568)
from
$185.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
MOOG – Leaf Spring Shackle Bushing (Part No.K8785)
from
$18.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Energy Suspension – Control Arm Bushing Set (Part No.4.3106R)
from
$16.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Rare Parts – Shackle Assembly (Part No.RP35565)
from
$189.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with shackle plates and bushings
- No Squeak
- Rubber or Heat Treated bushings
- Restores ride height
KYB – Gas Shock (Part No.343135)
from
$47.49
Product Features:
See More
- Recommended OEM replacement shock for classic, domestic cars
- Specifically calibrated to help restore original handling and control characteristics
- Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
- Triple chrome plated piston rod and multi-lip oil seals that reduce wear
- Solid seamless mounting eye rings and bolt bushings to eliminate rattles
KYB – Gas Shock (Part No.343136)
from
$40.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Product Features:
See More
Product Features:
- KYB Recommended Orem Replacement Shock For Classic, Domestic Cars
- The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Classic Ford
- The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
- Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
- KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
Rare Parts – Spring Bolt Kit (Part No.RP35308)
from
$36.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Grade 5 or higher bolt/pin
- No Squeak
- Reduces vibration
Rare Parts – Spring Perch (Part No.RP16152)
from
$79.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Helps reduces tire wear
- Smoother ride
- Supplied in matched sets
- Coated to resist corrosion
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Rare Parts – Cam Bolt & Bushing Kit (Part No.RP15943)
from
$61.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves vehicle handling
- Restores OE alignment
- Improves steering geometry
- Easy camber adjustment
Rare Parts – Control Arm Shaft Kit (Part No.RP15369)
from
$172.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
Rare Parts – Control Arm Shaft Kit (Part No.RP15348)
from
$133.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Heat Treated thread and bushing
- Torsional rubber bushings
- Precision thread tolerances
- Greaseable
Rare Parts – Control Arm Shaft Kit (Part No.RP15117)
from
$146.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
Rare Parts – Spring Bushing (Part No.RP35969)
from
$32.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Heat Treated bushings
- No Squeak
- Reduces vibration
Mercury Comet Suspension Parts Categories
Helping You Find the Right Suspension Parts for Your Mercury Comet
You love your Comet. So we’ve made it easier than ever to help you find Mercury Comet Suspension Parts in our online catalog. Our inventory holds 38 aftermarket and OEM Suspension Parts for your Mercury Comet, ranging from $13.29 to $189.99.
We offer parts from 10 brands trusted to make quality Suspension Parts for your Mercury Comet. Before you buy, take some time to read through customer reviews. We currently have 5,540 reviews of Mercury Comet Suspension Parts from previous customers. Some of the top rated parts include OESpectrum Passenger Car Shock Absorber with 4.0 stars and Gas Shock with 3.0 stars.
Find your Comet Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercury Comet part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Suspension Parts Brands for Your Mercury Comet
Our inventory holds Suspension Parts for your Mercury Comet from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Monroe, KYB, and Rare, all of which can keep that Mercury happy.
We have Monroe parts available for your Mercury Comet in categories like Coil and Leaf Springs and Shocks and Struts. Some of the top-rated Monroe parts in these categories are:
Top-Rated Monroe Suspension Parts
Leading Monroe Suspension Parts
We carry Monroe brand parts for your Mercury Comet across several catalog categories, including Shocks and Struts. Some of our most reviewed Monroe parts include:
FAQs for Mercury Comet Suspension Parts
What are the most purchased Suspension Parts for the Mercury Comet?
Out of 38 Suspension Parts for the Mercury Comet, the most popular in our inventory are:
What are the top-rated Mercury Comet Suspension Parts?
Top-rated Suspension Parts for your Mercury Comet based on customer reviews/ratings are:
from
$47.99
(1)
OESpectrum Passenger Car Shock Absorber
“Bought these shocks, after about 100 miles the passenger shock busted at the lower attachment… replaced it.. after about 50 more miles the driver si”
