Mercedes-Benz SL65 AMG Brake Parts

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:

• Short closing paths
• Low volume uptake
• High efficiency
• Low throttling / after-suction resistance
• Low pressure differential between primary and secondary circuits
• Good bleedability
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)
• Central valve version suitable for ABS
• Compact design – ideal for installation in small spaces
• Reduced weight – by roughly 20% compared to conventional central valve technology
• Fewer components – almost half as many as compared to conventional technologies
• Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
• Low volume uptake – minimized elastic deformations due to smaller seals
• Sealing cups supported in the housing – robustness against soiling and wear; longer life
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)

The Febi/Bilstein Brake Disc Set Screw is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.

Product Features:

• Contains all the necessary hardware for easy installation
• Direct replacement for a perfect fit, form and function
• Corrosion resistant for long-lasting durability against harsh roads
• Manufactured with quality materials to restrain high tolerances

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:

• PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
• Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
• All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
• Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
• As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.

Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:

• High durability
• Low volume expansion
• 100% high pressure tested and certified quality

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

• Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
• Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
• Quality assured – materials tested to exacting government-regulated safety and durability standards
• Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
• Brand may vary by location

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
• Corrosion resistant coating for long-lasting durability against harsh roads
• Manufactured with quality materials to suppress high stress levels

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

The Brembo brand has a range of over 1,600 items, which covers a remarkable 98% of all passenger cars and commercial vehicles on the roads in Europe today. Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments. PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%. Fixing screw kits: discs are supplied with all the necessary fixing hardware for simpler, more efficient and safer installation

Product Features:

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

Oil Drain Plug Gasket

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

• Wearever Brake Shoes come bonded or riveted based on OE design.
• Wearever Brake Shoes are coated to prevent rust.
• Wearever Brake Shoes are 100% New not remanufactured.
• Brand may vary by location

ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers.

Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

• Industry leading number of application specific formulations for maximum performance and extended pad life
• On-vehicle testing similar to original equipment tests
• Patented 4-Layer HEX Shim Technology provides quiet braking
• HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
• Burnishing compound allows for a faster break-in of pads and rotors
• PTFE coated hardware and caliper pin grease included for nearly every application
• Wear sensors included on most European applications that require replacement
• Powder-coated backing plate prevents corrosion

CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Carquest Professional Platinum Euro brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. We include the wear sensors for most European applications that require replacement. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

• Industry leading number of application specific formulations for maximum performance and extended pad life
• On-vehicle testing similar to original equipment tests
• Patented 4-Layer HEX Shim Technology provides quiet braking
• HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
• Burnishing compound allows for a faster break-in of pads and rotors
• PTFE coated hardware and caliper pin grease included for nearly every application
• Wear sensors included on most European applications that require replacement
• Powder-coated backing plate prevents corrosion

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Maintains proper movement for safe, effective stopping performance
• Prevents noise and premature wear

CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Single layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion

The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

• Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
• Positive mold technology for consistent wear and performance
• Thermal scorched pad surface for a fast break-in
• Chamfered and slotted to ensure noise free braking
• Powder coated backing plate resists rust and corrosion to provide extended pad life
• Multi-Layer rubberized shims provide virtually noise-free braking
• Includes Premium stainless-steel hardware for easy installation