Mercedes-Benz SL55 AMG Steering and Chassis Parts

Product Features:

• OE matched design for Form, Fit, and Function
• Advanced corrosion-resistant electro-coating to reduce rust
• Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
• Hex formed studs and/or wrench flats for ease of installation
• Hardware included for easier installation (where applicable)
• Thread locking compound included.

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Loose or worn chassis parts can lead to premature tire wear
• Exclusive cover plate protects against contaminants leaking into the bearing surface
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
• Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Improves upon OE designs
• Quiet, dependable operation
• Provides like-new steering, ease of installation and longer life
• Incorporates proven design and engineering features

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Makes non-adjustable vehicle adjustable
• Replaces original OE inner bolt on lower control arm
• Adjustment Range: +/- .03 Degrees
• Easy to install
• Construction and design validated by MOOG engineers

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

Product Features:

• Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
• Small size provides an easy fit, even in cramped systems
• Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
• Filter can be easily serviced, extending its functional lifespan considerably

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

Steering system remanufacturing is the only way to ensure that older vehicles continue to perform safely on the road. Our high standards and rigorous testing processes offer peace of mind to you and your customers, and this is reinforced by the TRW guarantee. We design and produce the original steering and braking systems for several major manufacturers, so we understand the importance of upholding the highest safety standards. All of our steering products are tested to original equipment standards, which helps us to meet and exceed the international regulations. It’s our own in-house testing processes that make our remanufactured steering systems perform so well. These processes cover: acoustic measurements for driver comfort, strength tests, environmental resistance, wear tests, assembly technique and road testing. All of these examinations mean that the steering system is equipped and prepared to deal with the real world, offering tangible safety and protection benefits for drivers.

Product Features:

• OE quality and direct fit replacement
• Manufactured based on highest quality OE standards

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

• 100% replacement of rubber sealing components.
• Application of specialized lubricant(s) for extended life.
• Finished in protective coating to prevent corrosion and rust.
• Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

• All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100% tested and calibrated pressure relief valves.
• Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
• LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
• ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
• ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
• LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
• ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
• ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

P/S Hose O-Ring

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:

• Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
• Low friction plastic bearings that enhance damping and reliability
• Manufactured using forged or cold formed steel
• Two-seat design is standard, and eliminates the need for a spring
• Top of the ball pins are polished
• Salt Spray Test (240hrs)
• Dynamic Test and Elasticity Test
• Original Equipment quality hardware installation accessories

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Easy to install.
• Construction and design validated by MOOG engineers
• Premium forged housing with increased cross section of up to 52% more material in key areas
• Broad coverage for foreign and domestic applications
• Designed to meet or exceed original equipment performance

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Heat treated components
• Dust seal to prevent contamination
• Restores vehicle handling
• Restores OE alignment

BALL JOINT 1 EA DRIVE

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Easy to install.
• Construction and design validated by MOOG engineers
• Premium forged housing with increased cross section of up to 52% more material in key areas
• Broad coverage for foreign and domestic applications
• Designed to meet or exceed original equipment performance