Mercedes-Benz S350 Exhaust Parts
Top Mercedes-Benz S350 Exhaust Parts Categories
We carry over 19 Exhaust Parts in inventory for the Mercedes-Benz S350. If you’re looking for aftermarket Exhaust Parts for your Mercedes-Benz S350, check out all these categories:
Essential Mercedes-Benz S350 Exhaust Parts
Dorman – Exhaust Gas Temperature Sensor (Part No.904-741)
from
$133.99
EGT sensors frequently seize in the exhaust bung, making replacement difficult and damaging the bung. This Dorman OE FIX solution directly replaces the sensor and comes with a bung repair kit just in case.
Product Features:
See More
Product Features:
- Convenient solution – this replacement EGT sensor comes with a bung repair kit in case the bung is damaged during removal
- Cost-effective fix – bung repair kit allows direct repair of damaged bung instead of replacing entire exhaust pipe
- Complete kit – comes with sensor, new bung, weld-on plate and zip tie
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGC2529)
from
$114.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Dorman – Exhaust Gas Temperature Sensor (Part No.904-771)
from
$137.99
EGT sensors frequently seize in the exhaust bung, making replacement difficult and damaging the bung. This Dorman OE FIX solution directly replaces the sensor and comes with a bung repair kit just in case.
Product Features:
See More
Product Features:
- Convenient solution – this replacement EGT sensor comes with a bung repair kit in case the bung is damaged during removal
- Cost-effective fix – bung repair kit allows direct repair of damaged bung instead of replacing entire exhaust pipe
- Complete kit – comes with sensor, new bung, weld-on plate and zip tie
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Dorman – Exhaust Gas Temperature Bung Repair Kit – Female (Part No.904-533)
from
$19.99
This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
- Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
- Application specific – designed for certain BMW, Chrysler, GM, Mercedes and Volkswagen model years
- This part has undergone vehicle try-on testing for conformance to product standards and quality
Dorman – Exhaust Gas Temperature Bung Repair (Part No.904-528)
from
$34.99
This exhaust gas temperature (EGT) sensor bung repair kit is designed to match the original components required to repair the sensor bung on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
- Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
- Application specific – designed for a wide range of vehicle years, makes and models
- This part has undergone vehicle try-on testing for conformance to product standards and quality
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10501-01)
from
$43.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97363)
from
$25.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Elring – Exhaust Manifold Gasket (Part No.A8111116449ELR)
from
$3.57
Exhaust Manifold Gasket
HJS – Exhaust Clamp (Part No.H8020501631HJS)
from
$24.23
Exhaust Clamp
Febi – EXHAUST NUT (Part No.H1001570904FEB)
from
$2.17
EXHAUST NUT
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.454205)
from
$358.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 454205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.82600)
from
$696.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.451205)
from
$373.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 451205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.82503)
from
$733.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.451206)
from
$423.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 451206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Mercedes-Benz S350 Exhaust Parts Categories
Helping You Find the Right Exhaust Parts for Your Mercedes-Benz S350
You love your S350. So we’ve made it easier than ever to help you find Mercedes-Benz S350 Exhaust Parts in our online catalog. Our inventory holds 19 aftermarket and OEM Exhaust Parts for your Mercedes-Benz S350, ranging from $2.17 to $733.99.
We offer parts from 10 brands trusted to make quality Exhaust Parts for your Mercedes-Benz S350.
Find your S350 Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercedes-Benz S350 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Exhaust Parts Brands for Your Mercedes-Benz S350
Our inventory holds Exhaust Parts for your Mercedes-Benz S350 from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like HJS, Dorman, and Felpro, all of which can keep that Mercedes-Benz happy.
FAQs for Mercedes-Benz S350 Exhaust Parts
What are the most purchased Exhaust Parts for the Mercedes-Benz S350?
Out of 19 Exhaust Parts for the Mercedes-Benz S350, the most popular in our inventory are:
from
$34.99
This product is not rated
Exhaust Gas Temperature Bung Repair
EGT Sensor Bung Repair Kits
