Mercedes-Benz ML350 Engine Parts

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 3.0 Liter V6 Turbo Diesel

Product Features:

• 3.0 Liter V6 Turbo Diesel, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

CARDONE remanufactured Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every CARDONE turbocharger has been designed and tested to guarantee O.E. fit and performance. CARDONE is committed to getting your vehicle back on the road and back to peak performance with these remanufactured, direct-replacement turbochargers.

Product Features:

• All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
• Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
• All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
• 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
• Each unit comes with a pre-lube syringe to ensure product protection during installation.
• 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
• All units come with the required gaskets and mounting hardware for easy installation.
• Meets or exceeds O.E. performance.
• Comes with a pre-lube syringe to ensure product protection during installation.

Fuel Pump Gasket – M

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Oil Pump Seal

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Bosch Manifold Absolute Pressure (MAP) Sensors provide accurate air pressure measurement to very fine tolerances for efficient engine performance.

Product Features:

• Extremely sturdy design with a special coating for resistance of harmful chemicals inside the intake manifold.
• Bosch continually improves its MAP sensor designs with the latest chip technology.
• Designed to meet or exceed your vehicle’s original equipment specifications (performance, driveability, economy, emissions)

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to MERCEDES 12-18;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2012-2018
• Weight approx: 4 Lbs
• HYDRAULIC

Oil Dipstick Seal

Turbo Oil line Gaske

Timing Cover Gasket

Rein OE Quality Oil Cap

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

• Produced from spring steel for long-lasting flexibility of beads
• Thermal stability up to 600F
• Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
• Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
• Tightening instructions provided with each gasket for perfect results

Bosch OE quality crankshaft speed sensors with robust design for improved temperature shock stability, with enlarged temperature range and reduced drift during lifetime.

Product Features:

• Precise digital measurement of rotational speeds
• OE-technology quality components developed and manufactured to very fine tolerances
• High resistance against external interference

This OE quality oil dipstick is manufactured to meet OEM specifications for form, fit and function.

Product Features:

• Original Equipment fit, form and function
• Manufactured from high quality materials
• Right fit the first time

Oil Cooler

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
• Application specific design to ensure a perfect fit
• Meets or exceeds all original equipment specifications
• Validated for fit, form and function
• Unsurpassed quality you can trust
• Includes all the parts necessary to complete the repair unless otherwise noted
• Includes all the parts necessary to complete the repair unless otherwise noted

Goetze OE piston rings for gasoline and diesel engines, are developed for automobile, light commercial vehicle and heavy-duty applications, come in a wide range of sizes, include the first ring sets introduced for Euro4-compliant engines. The end gap can be a straight cut, angled cut or gas tight type for improved sealing. Radial pressure distribution greatly influences ring performance therefore we modify the pressure distribution according to the individual application. The wear-resistance and running-in behavior of the outer ring surface is defined by selecting from various coating options, which include the high-performance electroplated, thermally sprayed and PVD coatings. Goetze modern oil control rings scrape off oil from the cylinder wall, leaving just the required amount for lubrication. The running surface is the contour of the ring facing the cylinder surface. The objective of this running surface profile is to create a lubrication slot with a hydrodynamic film which the piston ring can slide on without touching the other surface. An optimized asymmetrical-barrelled running surface ensures low lubricant consumption even after a very long running time. Goetze piston rings have anti-scuffing properties that promote smooth engine operation, reduced oil consumption and long engine life. In addition, the Goetze process helps prevent materials from detaching and cracking and aids in environmental protection

Product Features:

• Maximum durability
• High wear and corrosion resistance
• Excellent heat-conducting capacity
• Optimal fit

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• Head bolt replacement recommended.
• Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.
• When a specific tightening torque has been reached, the bolts are turned further through a defined angle, which pre-loads them into the plastic region. Consequently, no retorquing is necessary.

Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• Meets or exceeds original equipment specifications.
• Zero engine leakage for late model vehicles.

High quality OE replacement part with all components needed to complete the job

Product Features:

• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• Application specific
• SUV and rear air applications