1983 GMC K2500 Bodies and Fender Parts

Essential 1983 GMC K2500 Bodies and Fender Parts

KAI – Dash Panel Overlay (Part No.DCV010005)

Dash Panel Overlay

from

$251.99
New Standard Replacement Dash Cap, Fits GM Full Size Pick Up/Blazer And Suburban

Product Features:
  • Fits GM Full Size Pick Up/Blazer And Suburban
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Backing Plate (Part No.RRP104R)

Backing Plate

from

$12.99
New Standard Replacement Passenger Side Rocker Panel Backing Plate, 33 1/2 X 6 1/2

Product Features:
  • 33 1/2 X 6 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Extension Panel (Part No.RRP114)

Fender Extension Panel

from

$24.99
New Standard Replacement Driver Side Rear Slip-On Fender Section, 41 5/8 X 12

Product Features:
  • 41 5/8 X 12, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Wheel Arch Trim (Part No.GM1790102)

Wheel Arch Trim

from

$24.99
New Standard Replacement Rear Driver Side Wheel Opening Molding

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Covercraft – Two-Piece Front End Cover – Vinyl, Black (Part No.MM42208)

Two-Piece Front End Cover - Vinyl, Black

from

$129.99
Covercraft’s Custom Mask provides protection to your vehicle’s nose. These front end covers are a sporty way to protect your vehicle from road hazards. Tar, rocks and bugs cause paint chips, dents and dings to your vehicle’s finish. A Custom Mask helps protect the value of your vehicle for years to come. Made from high-quality vinyl that is quick drying. Will not damage your paint or finish. Two-piece design full front end mask, Fits the curves and contours of your specific vehicle, Dries itself while you drive, Installs easily in minutes, Shrink and fade resistant, 90-day warranty.

Product Features:
  • Full Front Area Protection
  • Protects Against Bugs, Rock Chips
  • Hood Opens with Mask In Place (MM Series)
  • Heavy Duty Vinyl with Soft Fleece Back
  • Custom Patterned for Easy Installation
  • Warranty: 90 Days
See More

Energy Suspension – Body Cab Mount Set (Part No.3.4122R)

Body Cab Mount Set

from

$147.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Assures Longer Lasting Cab to Bed Alignment
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)

Panel Trim Retainer - Interior - GM/Chrysler

from

$2.49
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:
  • Needa Parts offers a complete assortment for all popular makes and models
  • Vehicle make specific fastener kits are available
  • All fasteners meet or exceed OEM standards
See More

KAI – Spare Tire Bracket (Part No.GMK4144967751)

Spare Tire Bracket

from

$59.99
New Goodmark Spare Tire Support Hook, For Models With Glide-Out Spare Tire, Made Of Steel

Product Features:
  • For Models With Glide-Out Spare Tire Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.RRP3789)

Rocker Panel

from

$92.99
New Standard Replacement Driver Side Rocker Panel, 75 X 5.38 X 2.88

Product Features:
  • 75 X 5.38 X 2.88, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.RRP3548)

Rocker Panel

from

$33.99
New Standard Replacement Passenger Side Rocker Panel, 2 Door Models, 45.5 X 4.5 X 3.25

Product Features:
  • 2 Door Models, 45.5 X 4.5 X 3.25, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Quarter Panel Patch (Part No.RRP150)

Quarter Panel Patch

from

$49.99
New Standard Replacement Passenger Side Quarter Panel Rear Section, 60 1/2 X 28

Product Features:
  • 60 1/2 X 28, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.RRP1250)

Floor Pan

from

$64.99
New Standard Replacement Passenger Side Cab Floor Panel, 15 1/2 X 30

Product Features:
  • 15 1/2 X 30, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK414451073L)

Floor Pan

from

$54.99
New Goodmark Driver Side Rear Outer Cab Floor, Truck Side Of Front Seat

Product Features:
  • Truck Side Of Front Seat
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Wheel Arch Panel (Part No.RRP145)

Wheel Arch Panel

from

$33.99
New Standard Replacement Driver Side Upper Wheel Arch Patch, 41 X 12 X 2

Product Features:
  • 41 X 12 X 2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Wheel Arch Panel (Part No.RRP144)

Wheel Arch Panel

from

$33.99
New Standard Replacement Passenger Side Upper Wheel Arch Patch, 41 X 12 X 2

Product Features:
  • 41 X 12 X 2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dee Zee – With Step Pads, 3 Inch Round Bent, Polished, Ss, Frame Body Mount Bolts (Part No.DZ370113)

With Step Pads, 3 Inch Round Bent, Polished, Ss, Frame Body Mount Bolts

from

$368.99
Dee Zee Nerf Steps A tubular side step for your vehicle. Constructed of polished stainless steel. 3 Inch round design. Molded plastic step pads provide non skid stepping areas. Hidden but sturdy bracing and hardware is coated to help prevent rust and keep your tubes strong.

Product Features:
  • Mounting Kit Included
  • Frame Body Mount Bolts
  • Drilling Not Required
  • 1 Pad On The Bar
  • Molded Plastic Step Pads Ensure Secure Footing. 90 Degree Bends And Hidden Bracing Create A Sleek Look
  • Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
  • Hidden But Sturdy Bracing And Hardware Is Coated To Help Prevent Rust And Keep Your Tubes Strong
See More

Dee Zee – With Step Pads, 6" Oval Straight, Black Textured Powder Coated Steel (Part No.DZ16121)

With Step Pads, 6" Oval Straight, Black Textured Powder Coated Steel

from

$411.99
Trucks these days keep getting bigger and bigger. Whether you use your monster for work or play, the 6 Inch UltraBlack Tube Step design gives you a rugged step for climbing in and out of your beast. Constructed of heavy-duty steel with an oval design our UltraBlack Tube Step features molded plastic end caps and step pads at each door to keep your feet planted securely to the step when entering and exiting the vehicle. The rugged step pads are embossed with the Dee Zee name and provide a stylish non-slip surface. Let face it, as strong as steel is, it is also is susceptible to rust and corrosion. Our UltraBlack Tube step is protected by a textured black NRT (TM) (No Rust Technology) powder coat, a finish specially developed to increase corrosion protection.

Product Features:
  • Mount Kit Not Included
  • Drilling Not Required
  • Made From Rugged 16-Gauge Steel
  • 6 Inch Wide Design To Maximize Step Area
  • Molded Step Pads At Each Door Provide Unmatched Traction
  • Textured Black Powder Coated Featuring NRT (TM)
See More

KAI – Quarter Panel (Part No.GMK4174610732R)

Quarter Panel

from

$119.99
New Goodmark Passenger Side Lower Front Quarter Panel Patch, 7 3/4 Inches Wide X 14 1/2 Inches High

Product Features:
  • 7 3/4 Inches Wide X 14 1/2 Inches High
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)

Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material

from

$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:
  • Protect Your Vehicle And Trailer From Rocks And Messy Conditions
  • Universal Fitting
  • Easy No Drill Installation
  • Perfect Compliment Nerf Bars
See More

Dee Zee – Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum (Part No.DZ1808TB)

Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum

from

$48.49
The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:
  • Classic Styling Of Brite-Tread Aluminum
  • Front Or Rear Wheel Protection
  • Radius Notch Contours To The Fender Well
  • Protected By A BriteGard Powder Coat Finish
See More

KAI – B-Pillar/Rocker Panel (Part No.RRP102)

B-Pillar/Rocker Panel

from

$41.99
New Standard Replacement Passenger Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – B-Pillar/Rocker Panel (Part No.RRP103)

B-Pillar/Rocker Panel

from

$44.99
New Standard Replacement Driver Side Rocker Panel With Short B-Pillar Door Post, 46 3/4 X 11 3/4

Product Features:
  • 46 3/4 X 11 3/4, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Roll Pan (Part No.EFXRP03)

Roll Pan

from

$189.99
New ProEFX Steel Rear Roll Pan, With License Plate Pocket

Product Features:
  • With License Plate Pocket
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Roll Pan (Part No.EFXRP02)

Roll Pan

from

$189.99
New ProEFX Rear Roll Pan Without License Plate

Product Features:
  • Without License Plate
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Roll Pan (Part No.EFXRP16)

Roll Pan

from

$184.99
New ProEFX Rear Roll Pan, Without License Plate Part

Product Features:
  • Without License Plate Part
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Roll Pan (Part No.EFXRP15)

Roll Pan

from

$189.99
New ProEFX Rear Roll Pan With License Plate, Fleetside

Product Features:
  • Fleetside Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

1983 GMC K2500 Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 1983 GMC K2500. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 38 different Bodies and Fender Parts in our inventory ranging from $2.49 to $661.99. That means you can find the exact parts or products you need to keep that 1983 GMC K2500 running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1983 GMC K2500. Dee Zee, KAI, and ARIES are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 1983 GMC K2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1983 GMC K2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 1983 GMC K2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1983 GMC K2500 demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your K2500 the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular KAI Bodies and Fender Parts

We carry KAI parts in our stock across Wheel Arch Trims categories, plus more. For a 1983 GMC K2500, our most popular KAI Bodies and Fender Parts include:
Wheel Arch Trim
from $19.49
(1)
Wheel Arch Trim
Wheel Arch Trims

FAQs for 1983 GMC K2500 Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 1983 GMC K2500?

Out of 38 Bodies and Fender Parts for the 1983 GMC K2500, the most popular in our inventory are:
Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum
from $48.49
This product is not rated
Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum
Splash Guard (Mud Flap)
3 Inch Round Side Bars
from $153.99
This product is not rated
3 Inch Round Side Bars
Side Bars and Sideskirts
Body Cab Mount Set
from $144.99
This product is not rated
Body Cab Mount Set
Body Mounts