Mercedes-Benz GLE550e Fuel and Emissions Systems

The Febi Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Ambient Temp Sensor

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

• Helps avoid premature fuel pump failure
• Lint free towel included
• Low suds formulation
• Removes harmful contaminants from the fuel tank

Bosch Manifold Absolute Pressure (MAP) Sensors provide accurate air pressure measurement to very fine tolerances for efficient engine performance.

Product Features:

• Extremely sturdy design with a special coating for resistance of harmful chemicals inside the intake manifold.
• Bosch continually improves its MAP sensor designs with the latest chip technology.
• Designed to meet or exceed your vehicle’s original equipment specifications (performance, driveability, economy, emissions)

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

• Specifically designed to meet the increasing demands of today’s engines
• 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
• Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
• Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
• Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Base ceramic probe of Zirconium and Yttrium.
• Patented Platinum Power Grid.

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.  Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product. 

Product Features:

• Advanced Wideband sensing element for exact air/fuel measurement
• Robust sensor design increases sensor longevity
• Seared protection tube due to 100% functional quality test
• ‘True Direct-fit’ OE connectors and harness
• Pre-coated threads with anti-seize compound right out of the box

The Bosch Mechanical Fuel Pump meets or exceeds the OE specifications for fit, durability and performance.

Product Features:

• OE-Equivalent mechanical fuel pump.
• Direct fit for easy installation.
• OE style connections and fittings.

Fuel Pump Lock Ring

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

• SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
• DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
• ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
• STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:

• Specifically designed to meet the increasing demands of today’s engines
• 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
• Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
• Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
• Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

FUEL INJECTOR SEAL