Mercedes-Benz GL550 Steering and Chassis Parts

The Lemfoerder Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components. Power steering reservoir to pump.

Steering Rack Mount

P/S Reservoir

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

• Matches OE form, fit and function
• One piece neoprene boot (this is not a split boot)
• Includes boot and two clamps for complete installation.
• Quality construction for durability
• Application specific for this vehicle

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

• Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
• Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
• Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
• Meets or exceeds O.E. performance.

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering

POWER STEERINGFILTER

Product Features:

• Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
• Small size provides an easy fit, even in cramped systems
• Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
• Filter can be easily serviced, extending its functional lifespan considerably

FEBI Tie rod ends strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rod ends ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.

Product Features:

• Original Equipment Manufacturer
• Larger diameter to increase the load carrying capacity
• Outstanding slide properties
• High ball stud articulation angles.

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Restores vehicle handling
• Restores OE alignment
• Reduces tire wear
• Improves steering response

Burgaflex is a market leader in the field of industrial hydraulics, air conditioning, and aerospace hose and fitting.

Product Features:

• Manufactured as a direct OE replacement
• Pressure tested to maintain a consistent flow
• Backed by the manufactures warranty against workmanship and material defects

Driveshaft Flex Join

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Improves upon OE designs
• Quiet, dependable operation
• Provides like-new steering, ease of installation and longer life
• Incorporates proven design and engineering features
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
• Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
• LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
• ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
• ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

P S Hose Seal

CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:

• Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
• Performance testing ensures perfect fit, function and reliable performance.
• Computerized spool valve balancing ensures exceptional steering feel.
• Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
• Built to meet or exceed O.E.M. performance.

Steering system remanufacturing is the only way to ensure that older vehicles continue to perform safely on the road. Our high standards and rigorous testing processes offer peace of mind to you and your customers, and this is reinforced by the TRW guarantee. We design and produce the original steering and braking systems for several major manufacturers, so we understand the importance of upholding the highest safety standards. All of our steering products are tested to original equipment standards, which helps us to meet and exceed the international regulations. It’s our own in-house testing processes that make our remanufactured steering systems perform so well. These processes cover: acoustic measurements for driver comfort, strength tests, environmental resistance, wear tests, assembly technique and road testing. All of these examinations mean that the steering system is equipped and prepared to deal with the real world, offering tangible safety and protection benefits for drivers.

Product Features:

• OE quality and direct fit replacement
• Manufactured based on highest quality OE standards

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

• Protective coating applied to each unit to extend the life of the unit (where applicable).
• 100% performance testing to ensure perfect fit, function and reliable performance.
• 100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
• Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
• 100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
• All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
• Valve housings have polished micro-finish sleeves for durability (where applicable).
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

PWR New Rack & Pinions are engineered and manufactured for superior performance and reliability. All racks have precision manufacturing controlled internal components. PWR Rack & Pinions enhance installation efficiency, address premature product-based failures, and increase lasting customer satisfaction.

Product Features:

• All PWR units are 100% NEW
• Factory Installed Rack Integrated Mounting Bushings
• Best-In-Class Industrial Grade Packaging
• PWR Engineering Approved Tie Rod, Boot, and Boot Seal Designs
• Precision Routed and Constructed Fluid Transfer Tubes
• Manufactured to meet or exceed OE requirements
• Engineering, test, and quality validation in the USA

Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:

• OE quality and direct fit replacement
• Remanufacture based on highest quality standards
• Computerized tests insure that all products meet the OE performance specification.
• Performance and quality approvals from OE steering gear and pump manufacturers world wide

Steering system remanufacturing is the only way to ensure that older vehicles continue to perform safely on the road. Our high standards and rigorous testing processes offer peace of mind to you and your customers, and this is reinforced by the TRW guarantee. We design and produce the original steering and braking systems for several major manufacturers, so we understand the importance of upholding the highest safety standards. All of our steering products are tested to original equipment standards, which helps us to meet and exceed the international regulations. It’s our own in-house testing processes that make our remanufactured steering systems perform so well. These processes cover: acoustic measurements for driver comfort, strength tests, environmental resistance, wear tests, assembly technique and road testing. All of these examinations mean that the steering system is equipped and prepared to deal with the real world, offering tangible safety and protection benefits for drivers.

Product Features:

• OE quality and direct fit replacement
• Manufactured based on highest quality OE standards