Mercedes-Benz E500 Brake Parts

Essential Mercedes-Benz E500 Brake Parts

Febi – Brake Caliper Bolts (Part No.N1041757581FEB)

Brake Caliper Bolts

from

$5.98
Eliminate the replacement of costly steering knuckles, as well as time spent drilling, tapping or rethreading the mounting holes, with Febi’s Disc Brake Caliper Bolt Kit.

Product Features:
  • OE Quality
  • Save time, money and labor by replacing only the Disc Brake Caliper Bolt – instead of the entire caliper bracket or knuckle
  • Pre-coated with thread lock to prevent loosening
See More

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1527)

Brake Pad Wear Sensor

from

$15.79
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:
  • Triggers a warning light on the dashboard
  • Should be replaced each time the brake pad is replaced
  • Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13442A)

Disc Brake Hardware Kit

from

$20.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • Helps deliver a quieter, more efficient braking system
  • Low-friction PTFE coating to reduce drag
  • Manufactured with quality materials to suppress high stress levels
See More

ATE – Anti Rattle Spring / Clip (Part No.N1069225494ATE)

Anti Rattle Spring / Clip

from

$9.64
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Wearever – Parking Brake Shoes (Part No.S874)

Parking Brake Shoes

from

$39.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.11-2481)

Remanufactured Brake Master Cylinder

from

$101.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Euro Stop – Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads + Hardware Kit (Part No.ESK7764)

Euro-Stop High-Carbon Coated Rotors, ECE-R90 Brake Pads + Hardware Kit

from

$502.99
Product Features:
  • EuroStop pads have been engineered to meet the strict European ECE-R90 standards – certified OE compatible fitment and performance
  • Rotors coated for optimum anti-corrosion protection
  • High-carbon rotor metallurgy provides improved thermal conductivity to resist distortion and cracking; improved damping coefficient to reduce squeal
  • Rotors manufactured to strict tolerances for DTV and runout for smooth quiet performance
  • Pads manufactured in Europe for European applications
  • ECE-R90 brake pads produce an equivalent amount of brake dust to the OE product. PowerStop also offers lower-dust pad and kit products.
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Includes 3 Front & 3 Rear Sensor Wires
  • Buy with confidence from the originator & industry leader of brake kits
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000935809ZIC)

Coat-Z Brake Disc (Rotor)

from

$99.33
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Elring – Oil Drain Plug Gasket (Part No.A612044453ELR)

Oil Drain Plug Gasket

from

$1.21
Oil Drain Plug Gasket

Febi – Bilstein Brake Disc Set Screw (Part No.N1004140486FEB)

Bilstein Brake Disc Set Screw

from

$2.98
The Febi/Bilstein Brake Disc Set Screw is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ATE – Caliper Guide Pin Bo (Part No.N1057814935ATE)

Caliper Guide Pin Bo

from

$10.86
Caliper Guide Pin Bo

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.16158)

Disc Brake Caliper Guide Pin Boot Kit

from

$17.79
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Maintains proper movement for safe, effective stopping performance
  • Prevents noise and premature wear
See More

Carquest Platinum Painted – Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield (Part No.YH145543P)

Painted Brake Rotor Meets or Exceeds OE Specs, Features RotorShield

from

$84.99
Carquest Platinum painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Platinum painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Platinum painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Engineered to withstand 120 hours of salt spray testing
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1226)

Engine Camshaft Position Sensor Connector

from

$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-3287)

Semi Loaded Disc Brake Caliper

from

$146.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Meyle – Brake Press. Sw. Boo (Part No.N30212440977MEY)

Brake Press. Sw. Boo

from

$6.79
Brake Press. Sw. Boo

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5025)

Disc Brake Caliper Guide Pin Kit

from

$7.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Corteco – CORTECO Brake Hose (Part No.N7000293426CFW)

CORTECO Brake Hose

from

$23.99
Safety that you can rely on: CORTECO brake hoses CORTECO offers a full range of brake hoses in original quality with maximum reliability. Brake hoses are used in every car brake system and should be checked during each maintenance job. They are regarded as one of the most important components in vehicle brake systems. Therefore, CORTECO brake hoses are engineered and designed to OE quality standards. Expertise in leading-edge technology ensure the high quality standards of CORTECO brake hoses. CORTECO brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:
  • High durability
  • Low volume expansion
  • 100% high pressure tested and certified quality
See More

ATE – Anti Rattle Spring / Clip (Part No.N1069225490ATE)

Anti Rattle Spring / Clip

from

$17.84
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-2932)

Vacuum Brake Booster: Without Master Cylinder

from

$158.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

FTE – Brake Caliper Repair Kit (Part No.N1050650768FTE)

Brake Caliper Repair Kit

from

$80.33
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Economy Black – Disc Brake Caliper Repair Kit (Part No.15271)

Disc Brake Caliper Repair Kit

from

$4.99
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K4516)

Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver

from

$538.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
  • Rotors are zinc plated for maximum protection against rust.
  • Includes 2 Front & 2 Rear Sensor Wires
  • Buy with confidence from the originator & industry leader of brake kits
See More

PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K4517)

Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver

from

$490.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
  • Rotors are zinc plated for maximum protection against rust.
  • Includes 2 Front & 2 Rear Sensor Wires
  • Buy with confidence from the originator & industry leader of brake kits
See More

Helping You Find the Right Brake Parts for Your Mercedes-Benz E500

You love your E500. So we’ve made it easier than ever to help you find Mercedes-Benz E500 Brake Parts in our online catalog. Our inventory holds 131 aftermarket and OEM Brake Parts for your Mercedes-Benz E500, ranging from $1.21 to $713.99.

We offer parts from 28 brands trusted to make quality Brake Parts for your Mercedes-Benz E500. Before you buy, take some time to read through customer reviews. We currently have 1,122 reviews of Mercedes-Benz E500 Brake Parts from previous customers. Some of the top rated parts include Oversized Brake Caliper Bolt with 4.3 stars and Ceramic Brake Pads – (4-Pad Set) with 4.2 stars.

Find your E500 Brake Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercedes-Benz E500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Brake Parts Brands for Your Mercedes-Benz E500

Our inventory holds Brake Parts for your Mercedes-Benz E500 from 28 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest, Carquest Premium, and Carquest Professional, all of which can keep that Mercedes-Benz happy.

Top-Rated Carquest Wearever Brake Parts

Leading Carquest Wearever Brake Parts

We carry Carquest Wearever brand parts for your Mercedes-Benz E500 across several catalog categories, including Brake Pads and Shoes and Brake Calipers. Some of our most reviewed Carquest Wearever parts include:
Brake Pad Wear Sensor
from $9.49
(48)
Brake Pad Wear Sensor
Brake Wear Sensors
Disc Brake Caliper Guide Pin Kit
from $7.49
(35)
Disc Brake Caliper Guide Pin Kit
Brake Caliper Bolt and Pins
Brake Hose Assembly: Copper Washers Included
from $17.99
(34)
Brake Hose Assembly: Copper Washers Included
Brake Hoses

FAQs for Mercedes-Benz E500 Brake Parts

What are the most purchased Brake Parts for the Mercedes-Benz E500?

Out of 131 Brake Parts for the Mercedes-Benz E500, the most popular in our inventory are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders
Brake Pad Wear Sensor
from $15.79
(8)
Brake Pad Wear Sensor
Brake Wear Sensors
Brake Pads With Hardware, Ceramic, Longer Life, Quiet, Low Dust
from $70.99
(5)
Brake Pads With Hardware, Ceramic, Longer Life, Quiet, Low Dust
Rear Brake Pads and Shoes

What are the top-rated Mercedes-Benz E500 Brake Parts?

Top-rated Brake Parts for your Mercedes-Benz E500 based on customer reviews/ratings are:
Oversized Brake Caliper Bolt
from $25.49
(40)
Oversized Brake Caliper Bolt
“Had my caliper bolt strip on my mk4 Jetta. This oversized caliper bolt not only saved me from having to buy a knuckle, but made the repair painless an”
Ceramic Brake Pads - (4-Pad Set)
from $59.99
(18)
Ceramic Brake Pads – (4-Pad Set)
“Very nice”
Ceramic Brake Pads - (4-Pad Set)
from $64.99
(14)
Ceramic Brake Pads – (4-Pad Set)
“They fit and the price is great. Doesn’t come with the sensors.”