Mercedes-Benz CL55 AMG Brake Parts

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• All units are 100% tested to ensure reliable performance.
• Guaranteed fit and function.

Brake Pad Pin Set

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Brake Pressure Warning Switch

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Eliminate the replacement of costly steering knuckles, as well as time spent drilling, tapping or rethreading the mounting holes, with Febi’s Disc Brake Caliper Bolt Kit.

Product Features:

• OE Quality
• Save time, money and labor by replacing only the Disc Brake Caliper Bolt – instead of the entire caliper bracket or knuckle
• Pre-coated with thread lock to prevent loosening

Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.

Product Features:

• Contains all the necessary hardware for easy installation
• Direct replacement for a perfect fit, form and function
• Corrosion resistant for long-lasting durability against harsh roads
• Manufactured with quality materials to restrain high tolerances

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• New Brake Hardware prevents premature wear and maximizes performance
• Helps deliver a quieter, more efficient braking system
• Manufactured with quality materials to suppress high stress levels

ACDelco Professional Cornering Light Socket is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket socket is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

The Febi/Bilstein Brake Disc Set Screw is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

As an OE manufacturer, PEX brake wear sensors are designed and produced to have the same form, fit, and function as the original OE part. This means technicians get the right part for the job, the part fits properly, and the brake wear sensor works correctly once installed. This insures that as the brake pad wears down, the sensor makes proper contact with the rotor, which breaks the sensor’s wire loop. Once broken, the car’s warning lamp is illuminated, alerting the driver that the brake pads have worn to a level in which they need to be replaced.

Product Features:

• PEX sensors are designed and produced to have the same form, fit, and function as the original OE part enabling easy installation and ensuring proper fit.
• Use of high quality materials specified by auto manufactures ensures durability and resistance to extreme temperatures, as well as excellent electrical performance and provides safety and performance for drivers and passengers.
• All PEX products undergo stringent and constant quality controls. We inspect virtually every aspect going far beyond the form, fit, and function. Our Quality Control includes heat tests; resistance; as well as pull force testing – just to name a few.
• Our newly designed packaging is both cost effective and “green” since it is manufactured using fewer natural resources reflecting our dedication to corporate responsibility
• As the leading manufacturer of electronic brake wear sensors, PEX offers the widest range of sensors in our peer group for both commercial and passenger vehicles.

As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:

• Short closing paths
• Low volume uptake
• High efficiency
• Low throttling / after-suction resistance
• Low pressure differential between primary and secondary circuits
• Good bleedability
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)
• Central valve version suitable for ABS
• Compact design – ideal for installation in small spaces
• Reduced weight – by roughly 20% compared to conventional central valve technology
• Fewer components – almost half as many as compared to conventional technologies
• Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
• Low volume uptake – minimized elastic deformations due to smaller seals
• Sealing cups supported in the housing – robustness against soiling and wear; longer life
• Cr6-free surfaces for vehicles built from July 2007 (as required by law)

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

• Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
• Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
• Quality assured – materials tested to exacting government-regulated safety and durability standards
• Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

Akebono EURO® Ultra-Premium ceramic brake pads provide exactly the ideal vehicle control and performance response intended by the manufacturers of European makes. Maintain the enhanced pedal feel of European braking performance with brake pads and friction formulas engineered specifically for your vehicle and manufactured in the USA. Brake Pads That Ensure Optimal Responsiveness and Cleaner Wheels European car owners across North America now have a brake pad solution that will keep their wheels virtually free from dust and provide the European stopping power they expect. The use of our exclusive, highly advanced ceramic brake pad technology means that Akebono’s EURO Ultra-Premium brake pads provide excellent stopping power while extending rotor life and virtually eliminating brake dust, so the wheels on your European vehicle will remain their cleanest. In addition, Akebono EURO Ultra-Premium ceramic brake pads control noise, vibration, and harshness (NVH) and help ensure longer rotor life. They are the ultimate upgrade for semi-metallic and low-metallic brake pads. Akebono: The Industry Standard for European Manufacturers For over two decades, Akebono Ceramic Technology® (ACT) has been standard on many of North America’s passenger cars, light trucks, and SUVs and has set the benchmark for ceramic pads used in OE vehicle production. Now European manufacturers request Akebono brake products, and we can deliver that level of reliability to your replacement brake pads. Akebono manufactures replacement disc pads that contain the same materials, engineering, quality standards, and advanced technologies used to create our original ceramic brake pads. The use of Akebono ceramic brake pads ensures customer satisfaction and eliminates unnecessary return visits to the shop.

Product Features:

• Ultimate upgrade for OE semi-metallic, organic and low-metallic brake pads
• Ultra-Quiet – controls noise, vibration and harshness level
• European braking performance with enhanced pedal feel
• Extremely rotor friendly for longer rotor life
• Friction formulas specially designed for European vehicles

CARQUEST Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet and clean braking. CQ Wearever Gold brake pads are also manufactured by leading brake pad suppliers that OEM and OES heritage. Trust CQ Wearev

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific formulations designed for extended pad life and clean wheels
• Multi-layer shim for near silent braking
• OE designed slots and chamfers for consistent performance
• Hardware included on popular and late-model applications

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance