Mercedes-Benz CL500 Suspension Parts

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

The Vaico Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• Made in Germany OE Quality
• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications Q+ The Seal of Excellence
• ALWAYS OEM QUALITY
• ALWAYS MADE IN GERMANY

The Lemfoerder Control Arm Strut is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry. Lemfoerder uses only OE style bushings and ball joints minimizing road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• OE Bushings and Ball Joints
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW manufactures control arm struts for original equipment and service needs. TRW continues to develop next-generation control arm strut designs to reduce cost and weight, while maintaining or enhancing performance.

Product Features:

• Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
• Low friction plastic bearings that enhance damping and reliability
• Manufactured using forged or cold formed steel
• Two-seat design is standard, and eliminates the need for a spring
• Top of the ball pins are polished
• Salt Spray Test (240hrs)
• Dynamic Test and Elasticity Test
• Original Equipment quality hardware installation accessories

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

The Original Equipment Suspension Self Leveling Sensor is manufactured using the highest quality components and has a high level of resistance against vibrations. The Original Equipment Suspension Self Leveling Sensor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

• OE Quality
• High level of resistance against vibrations
• Sealed unit keeps out water and contaminates

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and a direct fit application.
• Meets or exceeds the OE specifications.
• Designed to reduce vibration and absorb noise.

The Vaico Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

The Vaico Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• Made in Germany OE Quality
• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications Q+ The Seal of Excellence
• ALWAYS OEM QUALITY
• ALWAYS MADE IN GERMANY

The Vaico Coil Spring Shim is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• Made in Germany OE Quality
• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications Q+ The Seal of Excellence
• ALWAYS OEM QUALITY
• ALWAYS MADE IN GERMANY

Max Performance Synthetic Power Steering Fluid

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
• LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
• ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
• ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

The Lemfoerder Control Arm Strut is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry. Lemfoerder uses only OE style bushings and ball joints minimizing road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• OE Bushings and Ball Joints
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

Rein OE Quality Hydraulic Suspension Line assemblies offer technicians an OE solution to no longer usable originals. These hose assemblies are built with OE zinc alloy coated carbon steel tubing and end fittings. The life expectancy of the Active Body Control (ABC) system is highly dependent on the condition of the circulating hydraulic fluid. Therefore, the hydraulic fluid should be changed regularly, and we highly recommend Pentosin CHF 11S power steering fluid for this service.

Product Features:

• Ensures proper operation of the Active Body Control system
• A direct-fit line assembly
• OE zinc alloy coated tubing and end fittings
• OE mounting bracket(s) and sealing hardware, where required

Rein OE Quality Hydraulic Suspension Line assemblies offer technicians an OE solution to no longer usable originals. These hose assemblies are built with OE zinc alloy coated carbon steel tubing and end fittings. The life expectancy of the Active Body Control (ABC) system is highly dependent on the condition of the circulating hydraulic fluid. Therefore, the hydraulic fluid should be changed regularly, and we highly recommend Pentosin CHF 11S power steering fluid for this service.

Product Features:

• Ensures proper operation of the Active Body Control system
• A direct-fit line assembly
• OE zinc alloy coated tubing and end fittings
• OE mounting bracket(s) and sealing hardware, where required

Rein OE Quality Hydraulic Suspension Line assemblies offer technicians an OE solution to no longer usable originals. These hose assemblies are built with OE zinc alloy coated carbon steel tubing and end fittings. The life expectancy of the Active Body Control (ABC) system is highly dependent on the condition of the circulating hydraulic fluid. Therefore, the hydraulic fluid should be changed regularly, and we highly recommend Pentosin CHF 11S power steering fluid for this service.

Product Features:

• Ensures proper operation of the Active Body Control system
• A direct-fit line assembly
• OE zinc alloy coated tubing and end fittings
• OE mounting bracket(s) and sealing hardware, where required

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Bushings manufactured from high quality elastomer compounds for durability and ride performance
• Assembled with proper precompression for ultimate in performance and feel

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

The Lemfoerder Control Arm Bushing Kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and a direct fit application.
• Meets or exceeds the OE specifications.
• Designed to reduce vibration and absorb noise.
• Kit includes bushings and hardware – (SEE Note)