from

$6.90

Tie Rod Bushing

from

$103.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$36.05

The Febi Idler Arm Repair Kit restores the idler arm reducing front-end vibration, shimmy and unsafe handling. The Febi idler arm Repair Kit is manufactured to OE tolerances for a proper fit and function.

Product Features:

Improves steering response
Repairs worn components
Reduces vibration
Reduces tire wear

from

$26.08

Power Steering Pump Repair Kit

from

$35.91

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$10.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$38.80

Tie Rod Assembly

from

$65.17

Due to their flexibility and ruggedness, these dampers have proven themselves as reliable partners outside of vehicle construction wherever vibrations had to be reduced and safely dampened. The diaphragm against the outside of the pressure tube can easily absorb the additional piston rod volume, resulting in slip-free force transmission in any mounting orientation. Due to the special piston system with valve plates, the damping forces can be set variably and virtually independently of each other. The TA20 is the standard version of this damper, which has a proven track record in numerous applications. The TA30 and TA40 variants are special designs, which will be customized for higher loads according to your requests after consultation with our product developers.

Product Features:

Damping forces up to 3000 N in tension and compression direction
Damping forces can be set independently of each other in both directions at the factory
Non-pressurized, no extension force
Positive, direct instant damping

from

$25.55

The FEQ Thrust Arm is manufactured using only the highest quality materials and is designed to maintain OE suspension geometry.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Bushings resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$75.15

The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$46.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$45.49

The Hebmuller Steering Gear Seal Kit is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$15.29

When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts ensure improved steering response and durability.

from

$9.76

Power Steering Seal

from

$42.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$628.99

The steering gear box is the heart of the vehicles steering system. It guides the wheels movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. Each unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.

Product Features:

100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100% new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$183.13

With Hardware The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:

OE quality, fit and performance
High quality rubber
Reinforced with advanced materials
Excellent vibration control

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$3.25

P/S Reservoir Gasket

from

$72.99

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$234.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$122.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$539.34

Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features: