Mercedes-Benz 380SLC Drivetrains
Top Mercedes-Benz 380SLC Drivetrains Categories
We carry over 29 Drivetrains in inventory for the Mercedes-Benz 380SLC. If you’re looking for aftermarket Drivetrains for your Mercedes-Benz 380SLC, check out all these categories:
Essential Mercedes-Benz 380SLC Drivetrains
Febi – Pinion Shaft Nut (Part No.J7030847447FEB)
from
$7.68
Pinion Shaft Nut
Corteco – AT Extension Housing (Part No.J507112428CFW)
from
$10.45
AT Extension Housing
SKF – Wheel Bearing (Part No.K800023845SKF)
from
$80.32
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.
Product Features:
See More
Product Features:
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
APA/URO Parts – Driveshaft Support with Bearing (Part No.K103016080APA)
from
$46.36
The APA/URO Driveshaft Support is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – Driveshaft Support Boot (Part No.K1051103910RIN)
from
$5.49
The Rein Driveshaft Support Boot is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Driveworks – Oil Seal (Part No.S-1174)
from
$6.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-968)
from
$689.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Driveworks – Oil Seal (Part No.S-1012N)
from
$2.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Driveshaft Flex Coupler (Part No.935-932)
from
$166.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV48998)
from
$212.99
Carquest CV Axle’s are made from the finest materials using premium steel, boot, and grease. Carquest CV Axles are designed to exceed the original equipment specifications for a trouble free ride.
Product Features:
See More
Product Features:
- High moly CV joint grease with stainless-steel boot bands
Driveworks – Tapered Roller Bearing (Part No.S-M-802048)
National – Bearings (Part No.M86610)
from
$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
SKF – Drive Shaft Support Bearing (Part No.K1040100111SKF)
from
$43.52
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. The Support Bearings are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Pre-Lubricated and reinforced seals
- Rubber support cushions are manufactured from durable rubber compounds
- Support frames are constructed from high quality steel or aluminum
Beck/Arnley – Bearing (Part No.051-3885)
from
$28.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- ABS magnet included if applicable
- Made with high quality materials
- Quality construction for durability
- Application specific for this vehicle
APA/URO Parts – Driveshaft End Bushi (Part No.K105415318APA)
from
$27.70
Driveshaft End Bushi
GKN Drivetech – CV Boot Kit (Part No.K601016586LOB)
from
$27.30
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
GKN Drivetech – CV Boot Kit (Part No.K601016585LOB)
from
$60.59
CV Boot Kit
National – Shaft Repair Sleeve (Part No.99177)
from
$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Meyle – Differential Mount (Part No.J707016071MEY)
from
$115.38
Differential Mount
Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)
from
$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Universal C.V. Joint Boot Kit Front Outer (Part No.03680)
from
$23.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Mercedes-Benz 380SLC Drivetrains Categories
Helping You Find the Right Drivetrains for Your Mercedes-Benz 380SLC
You love your 380SLC. So we’ve made it easier than ever to help you find Mercedes-Benz 380SLC Drivetrains in our online catalog. Our inventory holds 29 aftermarket and OEM Drivetrains for your Mercedes-Benz 380SLC, ranging from $2.99 to $689.99.
We offer parts from 15 brands trusted to make quality Drivetrains for your Mercedes-Benz 380SLC. Before you buy, take some time to read through customer reviews. We currently have 59 reviews of Mercedes-Benz 380SLC Drivetrains from previous customers. Some of the top rated parts include CV Axle Shaft Assembly with 3.4 stars and Shaft Repair Sleeve with 5.0 stars.
Find your 380SLC Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercedes-Benz 380SLC part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Mercedes-Benz 380SLC
Our inventory holds Drivetrains for your Mercedes-Benz 380SLC from 15 trusted brands. You’ll find OEM and aftermarket parts from brands like National, Dorman, and Driveworks, all of which can keep that Mercedes-Benz happy.
We have Driveworks parts available for your Mercedes-Benz 380SLC in categories like Transfer Cases. Some of the top-rated Driveworks parts in these categories are:
Top-Rated Dorman Drivetrains
Leading Dorman Drivetrains
We carry Dorman brand parts for your Mercedes-Benz 380SLC across several catalog categories, including CV Axles and Joints. Some of our most reviewed Dorman parts include:
FAQs for Mercedes-Benz 380SLC Drivetrains
What are the most purchased Drivetrains for the Mercedes-Benz 380SLC?
Out of 29 Drivetrains for the Mercedes-Benz 380SLC, the most popular in our inventory are:
What are the top-rated Mercedes-Benz 380SLC Drivetrains?
Top-rated Drivetrains for your Mercedes-Benz 380SLC based on customer reviews/ratings are:
from
$212.99
(7)
CV Axle Shaft Assembly
“Cost effective replacement found on AAP. Just replaced today. Seems fit nicely.”
from
$39.49
(1)
Shaft Repair Sleeve
“Easy to use, too early to tell how long it will last. It did stop the oil leak with a new oil seal on the front crankshaft pulley. 87 mercedes 300td.”
